Content of TOPICAL REVIEW—Emerging photovoltaic materials and devices in our journal

        Published in last 1 year |  In last 2 years |  In last 3 years |  All
    Please wait a minute...
    For selected: Toggle thumbnails
    Could two-dimensional perovskites fundamentally solve the instability of perovskite photovoltaics
    Luoran Chen(陈烙然), Hu Wang(王虎), and Yuchuan Shao(邵宇川)
    Chin. Phys. B, 2022, 31 (11): 117803.   DOI: 10.1088/1674-1056/ac693e
    Abstract248)   HTML5)    PDF (3119KB)(85)      
    The high efficiency and low production cost enable the halide perovskite solar cells as a promising technology for the next generation photovoltaics. Nevertheless, the relatively poor stability of the organic-inorganic halide perovskites hinders their commercial applications. In the past few years, two-dimensional (2D) perovskite has emerged as a more stable alternative to the three-dimensional (3D) counterparts and attracted intense research interests. Although many attempts and advances have been made, it is still ambiguous that whether the 2D perovskites could bring closure to the stability issue. To answer this essential question, a systematic study of the nature of 2D halide perovskites is necessary. Here, we focus on the stability investigations of 2D perovskites from different perspectives, especially light, heat, ion migration and strain. Several remaining challenges and opening problems are also discussed. With further material and device engineering, we believe that the 2D perovskites would promote perovskite solar cells to a promising future.
    Surface modulation of halide perovskite films for efficient and stable solar cells
    Qinxuan Dai(戴沁煊), Chao Luo(骆超), Xianjin Wang(王显进), Feng Gao(高峰), Xiaole Jiang(姜晓乐), and Qing Zhao(赵清)
    Chin. Phys. B, 2022, 31 (3): 037303.   DOI: 10.1088/1674-1056/ac1fe0
    Abstract362)   HTML6)    PDF (3510KB)(455)      
    As the main distribution place of deep-level defects and the entrance of water, the interface is critical to determining both the power conversion efficiency (PCE) and the stability of perovskite solar cells (PSCs). Suitable interface design can dramatically passivate interface defects and optimize energy level alignment for suppressing the nonradiative recombination and effectively extracting the photogenerated carriers towards higher PCE. Meanwhile, a proper interface design can also block the interface diffusion of ions for high operational stability. Therefore, interface modification is of great significance to make the PSCs more efficient and stable. Upon optimized material choices, the three-dimensional halide perovskite graded junction layer, low-dimensional halide perovskite interface layer and organic salt passivation layer have been constructed on perovskite films for superior PSCs, yet a systematic review of them is missing. Thus, a guide and summary of recent advances in modulating the perovskite films interface is necessary for the further development of more efficient interface modification.
    Applications and functions of rare-earth ions in perovskite solar cells
    Limin Cang(苍利民), Zongyao Qian(钱宗耀), Jinpei Wang(王金培), Libao Chen(陈利豹), Zhigang Wan(万志刚), Ke Yang(杨柯), Hui Zhang(张辉), and Yonghua Chen(陈永华)
    Chin. Phys. B, 2022, 31 (3): 038402.   DOI: 10.1088/1674-1056/ac373a
    Abstract491)   HTML3)    PDF (4879KB)(489)      
    The emerging perovskite solar cells have been recognized as one of the most promising new-generation photovoltaic technologies owing to their potential of high efficiency and low production cost. However, the current perovskite solar cells suffer from some obstacles such as non-radiative charge recombination, mismatched absorption, light induced degradation for the further improvement of the power conversion efficiency and operational stability towards practical application. The rare-earth elements have been recently employed to effectively overcome these drawbacks according to their unique photophysical properties. Herein, the recent progress of the application of rare-earth ions and their functions in perovskite solar cells were systematically reviewed. As it was revealed that the rare-earth ions can be coupled with both charge transport metal oxides and photosensitive perovskites to regulate the thin film formation, and the rare-earth ions are embedded either substitutionally into the crystal lattices to adjust the optoelectronic properties and phase structure, or interstitially at grain boundaries and surface for effective defect passivation. In addition, the reversible oxidation and reduction potential of rare-earth ions can prevent the reduction and oxidation of the targeted materials. Moreover, owing to the presence of numerous energetic transition orbits, the rare-earth elements can convert low-energy infrared photons or high-energy ultraviolet photons into perovskite responsive visible light, to extend spectral response range and avoid high-energy light damage. Therefore, the incorporation of rare-earth elements into the perovskite solar cells have demonstrated promising potentials to simultaneously boost the device efficiency and stability.
ISSN 1674-1056   CN 11-5639/O4

Current issue

, Vol. 33, No. 3

Previous issues

1992 - present