中国物理B ›› 2017, Vol. 26 ›› Issue (8): 87802-087802.doi: 10.1088/1674-1056/26/8/087802

• CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES • 上一篇    下一篇

Studies on the polycrystalline silicon/SiO2 stack as front surface field for IBC solar cells by two-dimensional simulations

Shuai Jiang(姜帅), Rui Jia(贾锐), Ke Tao(陶科), Caixia Hou(侯彩霞), Hengchao Sun(孙恒超), Zhiyong Yu(于志泳), Yongtao Li(李勇滔)   

  1. 1 Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, China;
    2 University of Chinese Academy of Sciences, Beijing 100049, China;
    3 Jiangxi Science & Technology Normal University, Nanchang 330013, China
  • 收稿日期:2017-03-21 修回日期:2017-05-09 出版日期:2017-08-05 发布日期:2017-08-05
  • 通讯作者: Shuai Jiang, Rui Jia E-mail:jiangshuai@ime.ac.cn;jiarui_solar@souhu.com
  • 基金资助:

    Project supported by the National Natural Science Foundation of China (Grant Nos. 11104319, 11274346, 51202285, 61234005, 51172268, 51602340, 61274059, and 51402347), the Solar Energy Action Plan of Chinese Academy of Sciences (Grant Nos. Y1YT064001, Y1YF034001, and Y2YF014001), the Graduate and College Student's Innovative Project (Grant No. YC2016-X19), the Project of Beijing Municipal Science and Technology Commission (Grant No. Z151100003515003), and the Opening Project of Key Laboratory of Microelectronics Devices & Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences.

Studies on the polycrystalline silicon/SiO2 stack as front surface field for IBC solar cells by two-dimensional simulations

Shuai Jiang(姜帅)1,2, Rui Jia(贾锐)1, Ke Tao(陶科)1, Caixia Hou(侯彩霞)1, Hengchao Sun(孙恒超)1, Zhiyong Yu(于志泳)3, Yongtao Li(李勇滔)1   

  1. 1 Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, China;
    2 University of Chinese Academy of Sciences, Beijing 100049, China;
    3 Jiangxi Science & Technology Normal University, Nanchang 330013, China
  • Received:2017-03-21 Revised:2017-05-09 Online:2017-08-05 Published:2017-08-05
  • Contact: Shuai Jiang, Rui Jia E-mail:jiangshuai@ime.ac.cn;jiarui_solar@souhu.com
  • About author:0.1088/1674-1056/26/8/
  • Supported by:

    Project supported by the National Natural Science Foundation of China (Grant Nos. 11104319, 11274346, 51202285, 61234005, 51172268, 51602340, 61274059, and 51402347), the Solar Energy Action Plan of Chinese Academy of Sciences (Grant Nos. Y1YT064001, Y1YF034001, and Y2YF014001), the Graduate and College Student's Innovative Project (Grant No. YC2016-X19), the Project of Beijing Municipal Science and Technology Commission (Grant No. Z151100003515003), and the Opening Project of Key Laboratory of Microelectronics Devices & Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences.

RichHTML

0

PDF (PC)

402

赞

摘要：

Interdigitated back contact (IBC) solar cells can achieve a very high efficiency due to its less optical losses. But IBC solar cells demand for high quality passivation of the front surface. In this paper, a polycrystalline silicon/SiO2 stack structure as front surface field to passivate the front surface of IBC solar cells is proposed. The passivation quality of this structure is investigated by two dimensional simulations. Polycrystalline silicon layer and SiO2 layer are optimized to get the best passivation quality of the IBC solar cell. Simulation results indicate that the doping level of polycrystalline silicon should be high enough to allow a very thin polycrystalline silicon layer to ensure an effective passivation and small optical losses at the same time. The thickness of SiO2 should be neither too thin nor too thick, and the optimal thickness is 1.2 nm. Furthermore, the lateral transport properties of electrons are investigated, and the simulation results indicate that a high doping level and conductivity of polycrystalline silicon can improve the lateral transportation of electrons and then the cell performance.

关键词: polycrystalline silicon, SiO2, solar cell, passivation, simulation, IBC

Abstract:

Interdigitated back contact (IBC) solar cells can achieve a very high efficiency due to its less optical losses. But IBC solar cells demand for high quality passivation of the front surface. In this paper, a polycrystalline silicon/SiO2 stack structure as front surface field to passivate the front surface of IBC solar cells is proposed. The passivation quality of this structure is investigated by two dimensional simulations. Polycrystalline silicon layer and SiO2 layer are optimized to get the best passivation quality of the IBC solar cell. Simulation results indicate that the doping level of polycrystalline silicon should be high enough to allow a very thin polycrystalline silicon layer to ensure an effective passivation and small optical losses at the same time. The thickness of SiO2 should be neither too thin nor too thick, and the optimal thickness is 1.2 nm. Furthermore, the lateral transport properties of electrons are investigated, and the simulation results indicate that a high doping level and conductivity of polycrystalline silicon can improve the lateral transportation of electrons and then the cell performance.

Key words: polycrystalline silicon, SiO2, solar cell, passivation, simulation, IBC

中图分类号:  (Photoconduction and photovoltaic effects)

  • 78.56.-a
77.55.df (For silicon electronics) 82.20.Wt (Computational modeling; simulation) 82.45.Bb (Corrosion and passivation)