中国物理B ›› 2017, Vol. 26 ›› Issue (5): 54213-054213.doi: 10.1088/1674-1056/26/5/054213
• ELECTROMAGNETISM, OPTICS, ACOUSTICS, HEAT TRANSFER, CLASSICAL MECHANICS, AND FLUID DYNAMICS • 上一篇 下一篇
Jiang-Feng Zhu(朱江峰), Kai Liu(刘凯), Jiang Li(李江), Jun-Li Wang(王军利), Yang Yu(于洋), Hui-Bo Wang(汪会波), Zi-Ye Gao(高子叶), Teng-Fei Xie(谢腾飞), Chao-Yu Li(李超宇), Yu-Bai Pan(潘裕柏), Zhi-Yi Wei(魏志义)
Jiang-Feng Zhu(朱江峰)1, Kai Liu(刘凯)1, Jiang Li(李江)2, Jun-Li Wang(王军利)1, Yang Yu(于洋)1, Hui-Bo Wang(汪会波)1, Zi-Ye Gao(高子叶)1, Teng-Fei Xie(谢腾飞)2, Chao-Yu Li(李超宇)2, Yu-Bai Pan(潘裕柏)2,4, Zhi-Yi Wei(魏志义)3
摘要:
In this paper the laser activities of a diode-pumped Yb:LuAG ceramic which was prepared by the solid-state reactive sintering method were reported. The maximum output power was 1.86 W in the continuous wave (CW) laser operation, corresponding to a slope efficiency of 53.6%. The CW laser could be tuned from 1030 to 1096 nm by inserting a prism in the cavity. With the assist of a semiconductor saturable absorber mirror (SESAM), passive mode-locking was realized, delivering sub-picosecond pulses with 933 fs duration and an average power of 532 mW at a repetition rate of 90.35 MHz.
中图分类号: (Diode-pumped lasers)