中国物理B ›› 2016, Vol. 25 ›› Issue (2): 24306-024306.doi: 10.1088/1674-1056/25/2/024306

所属专题： Virtual Special Topic — Acoustics

• ELECTROMAGNETISM, OPTICS, ACOUSTICS, HEAT TRANSFER, CLASSICAL MECHANICS, AND FLUID DYNAMICS • 上一篇    下一篇

Calculation of multi-layer plate damper under one-axial load

Hui Yan(闫辉), Lu Zhang(张露), Hong-Yuan Jiang(姜洪源), Alexander M. Ulanov   

  1. 1. School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China;
    2. Samara State Aerospace University, Moskovskoe Shosse, Samara 443086, Russia
  • 收稿日期:2015-06-02 修回日期:2015-09-16 出版日期:2016-02-05 发布日期:2016-02-05
  • 通讯作者: Hong-Yuan Jiang E-mail:jhy_hit@hit.edu.cn
  • 基金资助:
    Project supported by the Programme of Introducing Talents of Discipline to Universities (Grant No. B07018).

Calculation of multi-layer plate damper under one-axial load

Hui Yan(闫辉)1, Lu Zhang(张露)1, Hong-Yuan Jiang(姜洪源)1, Alexander M. Ulanov2   

  1. 1. School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China;
    2. Samara State Aerospace University, Moskovskoe Shosse, Samara 443086, Russia
  • Received:2015-06-02 Revised:2015-09-16 Online:2016-02-05 Published:2016-02-05
  • Contact: Hong-Yuan Jiang E-mail:jhy_hit@hit.edu.cn
  • Supported by:
    Project supported by the Programme of Introducing Talents of Discipline to Universities (Grant No. B07018).

RichHTML

0

PDF (PC)

404

赞

摘要： A multi-layer damper with waved plates under one-axial load is considered. A method of theoretical calculation of its energy dissipation coefficient is proposed. An experimental research of own frequencies and vibration transfer ratios for different parameters of damper structure, harmonic vibration load and random load is performed. Results of this research are approximated by functions; it is possible to use these functions for the calculation of the damper too.

关键词: plate damper, energy dissipation coefficient, elastic-damping characteristics, amplitude-frequency characteristics

Abstract: A multi-layer damper with waved plates under one-axial load is considered. A method of theoretical calculation of its energy dissipation coefficient is proposed. An experimental research of own frequencies and vibration transfer ratios for different parameters of damper structure, harmonic vibration load and random load is performed. Results of this research are approximated by functions; it is possible to use these functions for the calculation of the damper too.

Key words: plate damper, energy dissipation coefficient, elastic-damping characteristics, amplitude-frequency characteristics

中图分类号:  (Vibration isolators, attenuators, and dampers)

  • 43.40.Tm
07.10.Fq (Vibration isolation) 46.40.Ff (Resonance, damping, and dynamic stability) 62.25.De (Low-frequency properties: response coefficients)