中国物理B ›› 2012, Vol. 21 ›› Issue (1): 14206-014206.doi: 10.1088/1674-1056/21/1/014206

• • 上一篇    下一篇

Characteristics of xenon-lamp pumped pyrromethene 567-doped dye laser based on polymethylmethacrylater

王磊, 陈德应, 夏元钦, 樊荣伟, 何伟明   

  1. National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin 150001, China
  • 收稿日期:2011-04-15 修回日期:2011-06-21 出版日期:2012-01-15 发布日期:2012-01-20
  • 基金资助:
    .

Characteristics of xenon-lamp pumped pyrromethene 567-doped dye laser based on polymethylmethacrylater

Wang Lei(王磊), Chen De-Ying(陈德应)†, Xia Yuan-Qin(夏元钦) Fan Rong-Wei(樊荣伟), and He Wei-Ming(何伟明)   

  1. National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin 150001, China
  • Received:2011-04-15 Revised:2011-06-21 Online:2012-01-15 Published:2012-01-20
  • Supported by:
    .

PDF (PC)

706

赞

摘要： The solid-state medium containing pyrromethene 567 (PM567) in a polymethylmethacrylate polymer host is shown to lase under the flash lamp excitation. The experimental setup is an ordinary industrial product without special design. The bulk transmission losses, the output energy, and the other lasing properties are compared. The medium with the lowest transmission loss, measured to be 0.392 %/cm at 633 nm, gives a laser output of 130 mJ with a slope efficiency of 0.082%.

关键词: solid dye laser, pyrroinethene-567 dye, xenon lamp excitation, polymethylmethacrylate

Abstract: The solid-state medium containing pyrromethene 567 (PM567) in a polymethylmethacrylate polymer host is shown to lase under the flash lamp excitation. The experimental setup is an ordinary industrial product without special design. The bulk transmission losses, the output energy, and the other lasing properties are compared. The medium with the lowest transmission loss, measured to be 0.392 %/cm at 633 nm, gives a laser output of 130 mJ with a slope efficiency of 0.082%.

Key words: solid dye laser, pyrroinethene-567 dye, xenon lamp excitation, polymethylmethacrylate

中图分类号:  (Dye lasers)

  • 42.55.Mv
42.60.Lh (Efficiency, stability, gain, and other operational parameters)