中国物理B ›› 2007, Vol. 16 ›› Issue (1): 266-271.doi: 10.1088/1009-1963/16/1/045

• 8000 CROSSDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY • 上一篇    下一篇

Edge method for measuring source spot-size and its principle

施将君, 刘军, 刘进, 李必勇   

  1. Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China
  • 收稿日期:2006-02-16 修回日期:2006-08-15 出版日期:2007-02-01 发布日期:2007-02-01
  • 基金资助:
    Project supported by the foundation of China Academy of Engineering Physics (Grant No 025300).

Edge method for measuring source spot-size and its principle

Shi Jiang-Jun(施将君), Liu Jun(刘军), Liu Jin(刘进)† , and Li Bi-Yong(李必勇)   

  1. Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China
  • Received:2006-02-16 Revised:2006-08-15 Online:2007-02-01 Published:2007-02-01
  • Supported by:
    Project supported by the foundation of China Academy of Engineering Physics (Grant No 025300).

PDF (PC)

389

赞

摘要： The edge method is used to measure the source spot-size. In this paper, the measuring principle and applying range are discussed. It is shown that the method can directly be used to measure the spot-size of either light source, or low-energy x-ray source, or x-ray source with an energy higher than 250 keV.

Abstract: The edge method is used to measure the source spot-size. In this paper, the measuring principle and applying range are discussed. It is shown that the method can directly be used to measure the spot-size of either light source, or low-energy x-ray source, or x-ray source with an energy higher than 250 keV.

Key words: edge method, edge spread function (ESF), linear spread function (LSF), full width at half maximum (FWHM)

中图分类号:  (X-ray beams and x-ray optics)

  • 41.50.+h
07.85.Fv (X- and γ-ray sources, mirrors, gratings, and detectors) 42.72.-g (Optical sources and standards)