Abstract: The investigation of electrochemical processes on the nanometer scale is of great scientific as well as technological interest. Here we study the electrodeposition of copper on a polycrystalline gold surface, and demonstrate that copper deposition can be locally induced by mechanical activation with the tip of an atomic force microscope (AFM). Whereas at higher values of the deposition voltage (>100mV), a solid copper film can grow on the gold surface without tip activation, at lower voltages (approx. 30-60mV), copper deposition only occurs at the position where the surface is activated by the AFM tip due to scanning in mechanical contact with the sample. With this mechano-electrochemical "writing" process, which can be performed at ambient conditions, the controlled local deposition of metallic islands is possible, at applied force loads of the order of 10nN. Both the size-dependence of the locally induced structures on the deposition time and the reversibility of the local deposition process are studied. Depending on the deposition parameters, individual copper islands between 50nm and 200nm in size were deposited at predefined locations on the gold surface. The investigations open perspectives for the controlled mechano-electrochemical writing of more complex nanostructures with the AFM tip.

Key words: electrochemistry, nanostructuring, atomic force microscopy (AFM, SFM), copper deposition