Chin. Phys. B
Citation Search Quick Search

ISSN 1674-1056 (Print)
CN 11-5639/O4
   » About CPB
   » Editorial Board
   » SCI IF
   » Staff
   » Contact
Browse CPB
   » In Press
   » Current Issue
   » Earlier Issues
   » View by Fields
   » Top Downloaded
   » Sci Top Cited
   » Submit an Article
   » Manuscript Tracking
   » Call for Papers
   » Scope
   » Instruction for Authors
   » Copyright Agreement
   » Templates
   » Author FAQs
   » PACS
   » Review Policy
   » Referee Login
   » Referee FAQs
   » Editor in Chief Login
   » Editor Login
   » Office Login
HighLights More»   
  • Realization of low-energy type-Ⅱ Dirac fermions in (Ir1-xPtx)Te2 superconductors

    Bin-Bin Fu(付彬彬), Chang-Jiang Yi(伊长江), Zhi-Jun Wang(王志俊), Meng Yang(杨萌), Bai-Qing Lv(吕佰晴), Xin Gao(高鑫), Man Li(李满), Yao-Bo Huang(黄耀波), Hong-Ming Weng(翁红明), You-Guo Shi(石友国), Tian Qian(钱天), Hong Ding(丁洪)
    Chin. Phys. B 2019, 28 (3): 037103
    Topological Dirac semimetals (DSMs) present a kind of topologically nontrivial quantum state of matter, which has massless Dirac fermions in the bulk and topologically protected states on certain surfaces. In superconducting DSMs, the effects of their nontrivial topology on superconducting pairing c...

  • Influence analysis of symmetry on capsule in six-cylinder-port hohlraum

    You Zou(邹游), Wudi Zheng(郑无敌), Xin Li(李欣)
    Chin. Phys. B 2019, 28 (3): 035203
    We have investigated the flux symmetry on the capsule in a six-cylinder-port hohlraum for improving the design of the hohlraum. The influence factors of drive symmetry on the capsule in the hohlraum are studied, including laser power, laser beams arrangement, hohlraum geometric parameters, plasma co...

  • Phase transitions in bismuth under rapid compression

    Dong-Liang Yang(杨栋亮), Jing Liu(刘景), Chuan-Long Lin(林传龙), Qiu-Min Jing(敬秋民), Yi Zhang(张毅), Yu Gong(宫宇), Yan-Chun Li(李延春), Xiao-Dong Li(李晓东)
    Chin. Phys. B 2019, 28 (3): 036201
    The structural phase transitions of bismuth under rapid compression has been investigated in a dynamic diamond anvil cell using time-resolved synchrotron x-ray diffraction. As the pressure increases, the transformations from phase I, to phase Ⅱ, to phase Ⅲ, and then to phase V have been observed und...

Chin. Phys. B  
  Chin. Phys. B--2019, Vol.28, No.3
Select | Export to EndNote
TOPICAL REVIEW—Fundamental research under high magnetic fields

Magnetochemistry and chemical synthesis

Lin Hu(胡林), Guoliang Xia(夏国良), Qianwang Chen(陈乾旺)
Chin. Phys. B, 2019, 28 (3): 037102 doi: 10.1088/1674-1056/28/3/037102
Full Text: [PDF 5616 KB] (Downloads:300) RICH HTML
Show Abstract

High magnetic field is one of the effective tools to control a chemical reaction and materials synthesis. In this review, we summarized the magnetic field effects on chemical reactions, such as reaction pathway, growth behavior of nanomaterials, product phase, and magnetic domain of materials. The surface spins and activity of catalysts under magnetic fields were also discussed.

SPECIAL TOPIC—Recent advances in thermoelectric materials and devices

Development of small pixel HgCdTe infrared detectors

Ming Liu(刘铭), Cong Wang(王丛), Li-Qing Zhou(周立庆)
Chin. Phys. B, 2019, 28 (3): 037804 doi: 10.1088/1674-1056/28/3/037804
Full Text: [PDF 5437 KB] (Downloads:585) RICH HTML
Show Abstract

After approximately half a century of development, HgCdTe infrared detectors have become the first choice for high performance infrared detectors, which are widely used in various industry sectors, including military tracking, military reconnaissance, infrared guidance, infrared warning, weather forecasting, and resource detection. Further development in infrared applications requires future HgCdTe infrared detectors to exhibit features such as larger focal plane array format and thus higher imaging resolution. An effective approach to develop HgCdTe infrared detectors with a larger array format size is to develop the small pixel technology. In this article, we present a review on the developmental history and current status of small pixel technology for HgCdTe infrared detectors, as well as the main challenges and potential solutions in developing this technology. It is predicted that the pixel size of long-wave HgCdTe infrared detectors can be reduced to 5 μm, while that of mid-wave HgCdTe infrared detectors can be reduced to 3 μm. Although significant progress has been made in this area, the development of small pixel technology for HgCdTe infrared detectors still faces significant challenges such as flip-chip bonding, interconnection, and charge processing capacity of readout circuits. Various approaches have been proposed to address these challenges, including three-dimensional stacking integration and readout circuits based on microelectromechanical systems.

Photodetectors based on small-molecule organic semiconductor crystals

Jing Pan(潘京), Wei Deng(邓巍), Xiuzhen Xu(徐秀真), Tianhao Jiang(姜天昊), Xiujuan Zhang(张秀娟), Jiansheng Jie(揭建胜)
Chin. Phys. B, 2019, 28 (3): 038102 doi: 10.1088/1674-1056/28/3/038102
Full Text: [PDF 7131 KB] (Downloads:374) RICH HTML
Show Abstract

Small-molecule organic semiconductor crystals (SMOSCs) combine broadband light absorption (ultraviolet-visible-near infrared) with long exciton diffusion length and high charge carrier mobility. Therefore, they are promising candidates for realizing high-performance photodetectors. Here, after a brief resume of photodetector performance parameters and operation mechanisms, we review the recent advancements in application of SMOSCs as photodetectors, including photoconductors, phototransistors, and photodiodes. More importantly, the SMOSC-based photodetectors are further categorized according to their detection regions that cover a wide range from ultraviolet to near infrared. Finally, challenges and outlooks of SMOSC-based photodetectors are provided.

SPECIAL TOPIC—Photodetector: Materials, physics, and applications

SnS2 quantum dots: Facile synthesis, properties, and applications in ultraviolet photodetector

Yao Li(李尧), Libin Tang(唐利斌), Rujie Li(李汝劼), Jinzhong Xiang(项金钟), Kar Seng Teng, Shu Ping Lau(刘树平)
Chin. Phys. B, 2019, 28 (3): 037801 doi: 10.1088/1674-1056/28/3/037801
Full Text: [PDF 2464 KB] (Downloads:465) RICH HTML
Show Abstract

Tin sulfide quantum dots (SnS2 QDs) are n-type wide band gap semiconductor. They exhibit a high optical absorption coefficient and strong photoconductive property in the ultraviolet and visible regions. Therefore, they have been found to have many potential applications, such as gas sensors, resistors, photodetectors, photocatalysts, and solar cells. However, the existing preparation methods for SnS2 QDs are complicated and require a high temperature and high pressure environments; hence they are unsuitable for large-scale industrial production. An effective method for the preparation of monodispersed SnS2 QDs at normal temperature and pressure will be discussed in this paper. The method is facile, green, and low-cost. In this work, the structure, morphology, optical, electrical, and photoelectric properties of SnS2 QDs are studied. The synthesized SnS2 QDs are homogeneous in size and exhibit good photoelectric performance. A photoelectric detector based on the SnS2 QDs is fabricated and its J-V and C-V characteristics are also studied. The detector responds under λ=365 nm light irradiation and reverse bias voltage. Its detectivity approximately stabilizes at 1011 Jones at room temperature. These results show the possible use of SnS2 QDs in photodetectors.

Efficient doping modulation of monolayer WS2 for optoelectronic applications

Xinli Ma(马新莉), Rongjie Zhang(张荣杰), Chunhua An(安春华), Sen Wu(吴森), Xiaodong Hu(胡晓东), Jing Liu(刘晶)
Chin. Phys. B, 2019, 28 (3): 037803 doi: 10.1088/1674-1056/28/3/037803
Full Text: [PDF 872 KB] (Downloads:186) RICH HTML
Show Abstract

Transition metal dichalcogenides (TMDCs) belong to a subgroup of two-dimensional (2D) materials which usually possess thickness-dependent band structures and semiconducting properties. Therefore, for TMDCs to be widely used in electronic and optoelectronic applications, two critical issues need to be addressed, which are thickness-controllable fabrication and doping modulation of TMDCs. In this work, we successfully obtained monolayer WS2 and achieved its efficient doping by chemical vapor deposition and chemical doping, respectively. The n- and p-type dopings of the monolayer WS2 were achieved by drop coating electron donor and acceptor solutions of triphenylphosphine (PPh3) and gold chloride (AuCl3), respectively, on the surface, which donates and captures electrons to/from the WS2 surface through charge transfer, respectively. Both doping effects were investigated in terms of the electrical properties of the fabricated field effect transistors. After chemical doping, the calculated mobility and density of electrons/holes are around 74.6/39.5 cm2·V-1·s-1 and 1.0×1012/4.2×1011 cm-2, respectively. Moreover, we fabricated a lateral WS2 p-n homojunction consisting of non-doped n-type and p-doped p-type regions, which showed great potential for photodetection with a response time of 1.5 s and responsivity of 5.8 A/W at VG=0 V and VD=1 V under 532 nm light illumination.

High performance lateral Schottky diodes based on quasi-degenerated Ga2O3

Yang Xu(徐阳), Xuanhu Chen(陈选虎), Liang Cheng(程亮), Fang-Fang Ren(任芳芳), Jianjun Zhou(周建军), Song Bai(柏松), Hai Lu(陆海), Shulin Gu(顾书林), Rong Zhang(张荣), Youdou Zheng(郑有炓), Jiandong Ye(叶建东)
Chin. Phys. B, 2019, 28 (3): 038503 doi: 10.1088/1674-1056/28/3/038503
Full Text: [PDF 714 KB] (Downloads:242) RICH HTML
Show Abstract

Ni/β-Ga2O3 lateral Schottky barrier diodes (SBDs) were fabricated on a Sn-doped quasi-degenerate n+-Ga2O3 (201) bulk substrate. The resultant diodes with an area of 7.85×10-5 cm2 exhibited excellent rectifying characteristics with an ideality factor of 1.21, a forward current density (J) of 127.4 A/cm2 at 1.4 V, a specific on-state resistance (Ron, sp) of 1.54 mΩ·cm2, and an ultra-high on/off ratio of 2.1×1011 at ±1 V. Due to a small depletion region in the highly-doped substrate, a breakdown feature was observed at -23 V, which corresponded to a breakdown field of 2.1 MV/cm and a power figure-of-merit (VB2/Ron) of 3.4×105 W/cm2. Forward current–voltage characteristics were described well by the thermionic emission theory while thermionic field emission and trap-assisted tunneling were the dominant transport mechanisms at low and high reverse biases, respectively, which was a result of the contribution of deep-level traps at the metal–semiconductor interface. The presence of interfacial traps also caused the difference in Schottky barrier heights of 1.31 eV and 1.64 eV respectively determined by current–voltage and capacitance–voltage characteristics. With reduced trapping effect and incorporation of drift layers, the β-Ga2O3 SBDs could further provide promising materials for delivering both high current output and high breakdown voltage.

SPECIAL TOPIC—Spin manipulation in solids

Spin torque nano-oscillators with a perpendicular spin polarizer

Cuixiu Zheng(郑翠秀), Hao-Hsau Chen(陈浩轩), Xiangli Zhang(张祥丽), Zongzhi Zhang(张宗芝), Yaowen Liu(刘要稳)
Chin. Phys. B, 2019, 28 (3): 037503 doi: 10.1088/1674-1056/28/3/037503
Full Text: [PDF 1704 KB] (Downloads:166) RICH HTML
Show Abstract
We present an overview in the understanding of spin-transfer torque (STT) induced magnetization dynamics in spin-torque nano-oscillator (STNO) devices. The STNO contains an in-plane (IP) magnetized free layer and an out-of-plane (OP) magnetized spin polarizing layer. After a brief introduction, we first use mesoscopic micromagnetic simulations, which are based on the Landau-Lifshitz-Gilbert equation including the STT effect, to specify how a spin-torque term may tune the magnetization precession orbits of the free layer, showing that the oscillator frequency is proportional to the current density and the z-component of the free layer magnetization. Next, we propose a pendulum-like model within the macrospin approximation to describe the dynamic properties in such type of STNOs. After that, we further show the procession dynamics of the STNOs excited by IP and OP dual spin-polarizers. Both the numerical simulations and analytical theory indicate that the precession frequency is linearly proportional to the spin-torque of the OP polarizer only and is irrelevant to the spin-torque of the IP polarizer. Finally, a promising approach of coordinate transformation from the laboratory frame to the rotation frame is introduced, by which the nonstationary OP magnetization precession process is therefore transformed into the stationary process in the rotation frame. Through this method, a promising digital frequency shift-key modulation technique is presented, in which the magnetization precession can be well controlled at a given orbit as well as its precession frequency can be tuned with the co-action of spin polarized current and magnetic field (or electric field) pulses.

Realization of low-energy type-Ⅱ Dirac fermions in (Ir1-xPtx)Te2 superconductors Hot!

Bin-Bin Fu(付彬彬), Chang-Jiang Yi(伊长江), Zhi-Jun Wang(王志俊), Meng Yang(杨萌), Bai-Qing Lv(吕佰晴), Xin Gao(高鑫), Man Li(李满), Yao-Bo Huang(黄耀波), Hong-Ming Weng(翁红明), You-Guo Shi(石友国), Tian Qian(钱天), Hong Ding(丁洪)
Chin. Phys. B, 2019, 28 (3): 037103 doi: 10.1088/1674-1056/28/3/037103
Full Text: [PDF 2678 KB] (Downloads:352) RICH HTML
Show Abstract

Topological Dirac semimetals (DSMs) present a kind of topologically nontrivial quantum state of matter, which has massless Dirac fermions in the bulk and topologically protected states on certain surfaces. In superconducting DSMs, the effects of their nontrivial topology on superconducting pairing could realize topological superconductivity in the bulk or on the surface. As superconducting pairing takes place at the Fermi level EF, to make the effects possible, the Dirac points should lie in the vicinity of EF so that the topological electronic states can participate in the superconducting paring. Here, we show using angle-resolved photoelectron spectroscopy that in a series of (Ir1-xPtx)Te2 compounds, the type-Ⅱ Dirac points reside around EF in the superconducting region, in which the bulk superconductivity has a maximum Tc of~3 K. The realization of the coexistence of bulk superconductivity and low-energy Dirac fermions in (Ir1-xPtx)Te2 paves the way for studying the effects of the nontrivial topology in DSMs on the superconducting state.


Discrete symmetrical perturbation and variational algorithm of disturbed Lagrangian systems

Li-Li Xia(夏丽莉), Xin-Sheng Ge(戈新生), Li-Qun Chen(陈立群)
Chin. Phys. B, 2019, 28 (3): 030201 doi: 10.1088/1674-1056/28/3/030201
Full Text: [PDF 715 KB] (Downloads:128) RICH HTML
Show Abstract

We investigate the perturbation to discrete conformal invariance and the adiabatic invariants of Lagrangian systems. A variational algorithm is proposed for a system subjected to the perturbation quantities. The discrete determining equations of the perturbations to conformal invariance are established. For perturbed Lagrangian systems, the condition of the existence of adiabatic invariant is derived from the discrete perturbation to conformal invariance. The numerical simulations demonstrate that the variational algorithm has the higher precision and the longer time stability than the standard numerical method.

Boundary scheme for lattice Boltzmann modeling of micro-scale gas flow in organic-rich pores considering surface diffusion

Hong Zuo(左鸿), Shou-Chun Deng(邓守春), Hai-Bo Li(李海波)
Chin. Phys. B, 2019, 28 (3): 030202 doi: 10.1088/1674-1056/28/3/030202
Full Text: [PDF 1994 KB] (Downloads:134) RICH HTML
Show Abstract
We propose a boundary scheme for addressing multi-mechanism flow in a porous medium in slip and early transition flow regimes, which is frequently encountered in shale gas reservoirs. Micro-gaseous flow in organic-rich shale involves a complex flow mechanism. A self-developed boundary scheme that combines the non-equilibrium extrapolation scheme and the combined diffusive reflection and bounce-back scheme (half-way DBB) to embed the Langmuir slip boundary into the single-relaxation-time lattice Boltzmann method (SRT-LBM) enables us to describe this process, namely, the coupling effect of micro-gaseous flow and surface diffusion in organic-rich nanoscale pores. The present LBM model comes with the careful consideration of the local Knudsen number, local pressure gradient, viscosity correction model, and regularization procedure to account for the rarefied gas flows in irregular pores. Its validity and accuracy are verified by several benchmarking cases, and the calculated results by this boundary scheme accord well with our analytical solutions. This boundary scheme shows a higher accuracy than the existing studies. Additionally, a subiteration strategy is presented to tackle the coupled micro-gaseous flow and surface diffusion, which necessitates the iteration process matching of these two mechanisms. The multi-mechanism flow in the self-developed irregular pores is also numerically investigated and analyzed over a wide range of parameters. The results indicate that the present model can effectively capture the coupling effect of micro-gaseous flow and surface diffusion in a tree-like porous medium.

Dynamical control of population and entanglement for open Λ-type atoms by engineering the environment

Xiao-Lan Wang(王晓岚), Yu-Kun Ren(任玉坤), Hao-Sheng Zeng(曾浩生)
Chin. Phys. B, 2019, 28 (3): 030301 doi: 10.1088/1674-1056/28/3/030301
Full Text: [PDF 512 KB] (Downloads:139) RICH HTML
Show Abstract
The exactly analytical solution for the dynamics of the dissipative Λ-type atom in the zero-temperature Lorentzian environment is presented. On this basis, we study the evolution of the population and entanglement. We find that the stable populations on the two lower levels of the Λ-type atom can be effectively adjusted by the combination of the relative decay rate and the environmental spectral frequency. However, for the initial Werner-like state, the stable entanglement between the two Λ-type atoms has very little tunability. Furthermore, the stable entanglement for the bilateral environment case is larger than that of the unilateral environmental case. A nonintuitive relation between the stable entanglement and stable population is found.

Statistics of states generated by quantum-scissors device

Ming-Hao Wang(王明浩), Guo-An Yan(闫国安)
Chin. Phys. B, 2019, 28 (3): 030302 doi: 10.1088/1674-1056/28/3/030302
Full Text: [PDF 2923 KB] (Downloads:112) RICH HTML
Show Abstract
Generating desired states is a prerequisite in quantum information. Some desired states can be generated by a quantum-scissors device (QSD). We present a detailed analysis of the properties of the generated states, including average photon numbers and intensity gains. The theoretical analysis shows that there is a nondeterministic amplification in terms of the average photon number under the condition that the average photon number of the input state is less than 1. In contrast to the input states, the generated states show the nonclassical property described by the negativity of the Wigner function. Furthermore, we generalize the QSD to truncate arbitrary photon number terms of the input states, which may be useful in high-dimensional quantum information processing.

Fringe visibility and distinguishability in two-path interferometer with an asymmetric beam splitter

Yanjun Liu(刘彦军), Jing Lu(卢竞), Zhihui Peng(彭智慧), Lan Zhou(周兰), Dongning Zheng(郑东宁)
Chin. Phys. B, 2019, 28 (3): 030303 doi: 10.1088/1674-1056/28/3/030303
Full Text: [PDF 487 KB] (Downloads:123) RICH HTML
Show Abstract
We study the fringe visibility and the distinguishability of a general Mach-Zehnder interferometer with an asymmetric beam splitter. Both the fringe visibility V and the distinguishability D are affected by the input state of the particle characterized by the Bloch vector S=(Sx,Sy,Sz) and the second asymmetric beam splitter characterized by the paramter β. For the total system is initially in a pure state, it is found that the fringe visibility reaches the upper bound and the distinguishability reaches the lower bound when cosβ=-Sx. The fringe visibility obtain the maximum only if Sx=0 and β=π/2 when the input particle is initially in a mixed state. The complementary relationship V2+D2 ≤ 1 is proved in a general Mach-Zehnder interferometer with an asymmetric beam splitter, and the conditions for the equality are also presented.

Plasmon mediated entanglement dynamics of distant quantum dots

Misbah Qurban, Rabia Tahira, Guo-Qin Ge(葛国勤), Manzoor Ikram
Chin. Phys. B, 2019, 28 (3): 030304 doi: 10.1088/1674-1056/28/3/030304
Full Text: [PDF 648 KB] (Downloads:138) RICH HTML
Show Abstract

We investigate the time evolution of entanglement between two quantum dots in an engineered vacuum environment such that a metallic nanoring having a surface plasmon is placed near the quantum dots. Such engineering in environment results in oscillations in entanglement dynamics of the quantum dots systems. With proper adjustment of the separation between the quantum dots, entanglement decay can be stabilized and preserved for longer time than its decay without the surface plasmons interactions.

Energy-optimal problem of multiple nonholonomic wheeled mobile robots via distributed event-triggered optimization algorithm

Ying-Wen Zhang(张潆文), Jin-Huan Wang(王金环), Yong Xu(徐勇), De-Dong Yang(杨德东)
Chin. Phys. B, 2019, 28 (3): 030501 doi: 10.1088/1674-1056/28/3/030501
Full Text: [PDF 564 KB] (Downloads:119) RICH HTML
Show Abstract

The distributed event-triggered optimization problem for multiple nonholonomic robots has been studied to minimize the global battery energy consumption. Each robot possesses its own cost function which depends on the state of the hand position and represents battery energy consumption. By coordinate transformation, the dynamics of the hand positions can be formulated into two groups of first-order integrators. Then the distributed event-triggered optimization algorithm is designed such that the states of robots' hand positions exponentially converge to the optimizer of the global cost function. Meanwhile, the velocity and orientation of each robot are ensured to reach zero and a certain constant, respectively. Moreover, the inter-execution time is lower bounded and the Zeno behavior is therefore naturally avoided. Numerical simulations show the effectiveness of the proposed algorithm.

Amorphous Si critical dimension structures with direct Si lattice calibration

Ziruo Wu(吴子若), Yanni Cai(蔡燕妮), Xingrui Wang(王星睿), Longfei Zhang(张龙飞), Xiao Deng(邓晓), Xinbin Cheng(程鑫彬), Tongbao Li(李同保)
Chin. Phys. B, 2019, 28 (3): 030601 doi: 10.1088/1674-1056/28/3/030601
Full Text: [PDF 3718 KB] (Downloads:109) RICH HTML
Show Abstract

Developing highly accurate critical dimension standards is a significant task for nanoscale metrology. In this paper, we put forward an alternative approach to fabricate amorphous Si critical dimension structures with direct Si lattice calibration in the same frame scanning transmission electron microscopy image. Based on the traceable measurement analysis, the optimized method can provide the same calibration accuracy and increase the fabrication throughput and lower the cost simultaneously, which benefits the application needs in atomic force microscopy (AFM) tip geometry characterization, benchmarking measurement tools, and conducting comparison measurements between different approaches.

Pre- and post-selected measurements with coupling-strength-dependent modulation

Zhaoxue Li(李兆雪), Jiangdong Qiu(邱疆冬), Linguo Xie(谢林果), Lan Luo(罗兰), Xiong Liu(刘雄), Zhiyou Zhang(张志友), Changliang Ren(任昌亮), JingLei Du(杜惊雷)
Chin. Phys. B, 2019, 28 (3): 030602 doi: 10.1088/1674-1056/28/3/030602
Full Text: [PDF 521 KB] (Downloads:96) RICH HTML
Show Abstract

Pre- and post-selected (PPS) measurement, especially the weak PPS measurement, has been proved to be a useful tool for measuring extremely tiny physical parameters. However, it is difficult to retain both the attainable highest measurement sensitivity and precision with the increase of the parameter to be measured. Here, a modulated PPS measurement scheme based on coupling-strength-dependent modulation is presented with the highest sensitivity and precision retained for an arbitrary coupling strength. This idea is demonstrated by comparing the modulated PPS measurement scheme with the standard PPS measurement scheme in the case of unbalanced input meter. By using the Fisher information metric, we derive the optimal pre- and post-selected states, as well as the optimal coupling-strength-dependent modulation without any restriction on the coupling strength. We also give the specific strategy of performing the modulated PPS measurement scheme, which may promote practical application of this scheme in precision metrology.

An improved arctangent algorithm based on phase-locked loop for heterodyne detection system

Chun-Hui Yan(晏春回), Ting-Feng Wang(王挺峰), Yuan-Yang Li(李远洋), Tao Lv(吕韬), Shi-Song Wu(吴世松)
Chin. Phys. B, 2019, 28 (3): 030701 doi: 10.1088/1674-1056/28/3/030701
Full Text: [PDF 1119 KB] (Downloads:111) RICH HTML
Show Abstract

We present an ameliorated arctangent algorithm based on phase-locked loop for digital Doppler signal processing, utilized within the heterodyne detection system. We define the error gain factor given by the approximation of Taylor expansion by means of a comparison of the measured values and true values. Exact expressions are derived for the amplitude error of two in-phase & quadrature signals and the frequency error of the acousto-optic modulator. Numerical simulation results and experimental results make it clear that the dynamic instability of the intermediate frequency signals leads to cumulative errors, which will spiral upward. An improved arctangent algorithm for the heterodyne detection is proposed to eliminate the cumulative errors and harmonic components. Depending on the narrow-band filter, our experiments were performed to realize the detectable displacement of 20 nm at a detection distance of 20 m. The aim of this paper is the demonstration of the optimized arctangent algorithm as a powerful approach to the demodulation algorithm, which will advance the signal-to-noise ratio and measurement accuracy of the heterodyne detection system.

Magnetic field analysis in a diamond anvil cell for Meissner effect measurement by using the diamond NV- center

Lin Zhao(赵琳), Donghui Yue(岳冬辉), Cailong Liu(刘才龙), Min Wang(王敏), Yonghao Han(韩永昊), Chunxiao Gao(高春晓)
Chin. Phys. B, 2019, 28 (3): 030702 doi: 10.1088/1674-1056/28/3/030702
Full Text: [PDF 1529 KB] (Downloads:124) RICH HTML
Show Abstract

Diamond negatively charged nitrogen-vacancy (NV-) centers provide an opportunity for the measurement of the Meissner effect on extremely small samples in a diamond anvil cell (DAC) due to their high sensitivity in detecting the tiny change of magnetic field. We report on the variation of magnetic field distribution in a DAC as a sample transforms from normal to superconducting state by using finite element analysis. The results show that the magnetic flux density has the largest change on the sidewall of the sample, where NV- centers can detect the strongest signal variation of the magnetic field. In addition, we study the effect of magnetic coil placement on the magnetic field variation. It is found that the optimal position for the coil to generate the greatest change in magnetic field strength is at the place as close to the sample as possible.


Femtosecond strong-field coherent control of nonresonant ionization with shaped pulses

Qiu-Nan Tong(佟秋男), Zhen-Zhong Lian(廉振中), Liang Zhao(赵亮), Hong-Xia Qi(齐洪霞), Zhou Chen(陈洲), Zhan Hu(胡湛)
Chin. Phys. B, 2019, 28 (3): 033201 doi: 10.1088/1674-1056/28/3/033201
Full Text: [PDF 1100 KB] (Downloads:87) RICH HTML
Show Abstract

The strong-field coherent control of the nonresonant ionization of nitrous oxide using shaped pulses is investigated. We study the dependence of periodic coherent oscillation of the total ionization yield on the variation of laser phase parameters. The physical mechanism of the strong-field coherent control is investigated experimentally and theoretically by the nonresonant spectral phase interferences in the frequency domain. We show that the intense shaped pulses with broadband and off-resonance can be used as a robust strong-field coherent control method.

Collision of cold CaF molecules: Towards evaporative cooling

Yuefeng Gu(顾跃凤), Yunxia Huang(黄云霞), Chuanliang Li(李传亮), Xiaohua Yang(杨晓华)
Chin. Phys. B, 2019, 28 (3): 033401 doi: 10.1088/1674-1056/28/3/033401
Full Text: [PDF 1285 KB] (Downloads:370) RICH HTML
Show Abstract

Long range intermolecular interaction potential surface of CaF (2Σ+) was simulated by employing the MOLPRO program and using the RCCSD(T)/def2-TZVP theory. The predicted data were further fitted to obtain the collision cross-section. The elastic collision cross-section of CaF at the temperature around 2 mK is as high as 6.5×10-9 cm2 and the collision rate is over 4.1×106 Hz. Additionally, we found that an orientation electric field will simplify the intermolecular interaction potential function from quaternary into ternary and the collision cross-section will be raised by about three orders. All-optical evaporative cooling of cold CaF is discussed in the conclusion.


Analysis of optical properties of bio-smoke materials in the 0.25-14 μm band

Xinying Zhao(赵欣颖), Yihua Hu(胡以华), Youlin Gu(顾有林), Xi Chen(陈曦), Xinyu Wang(王新宇), Peng Wang(王鹏), Xiao Dong(董骁)
Chin. Phys. B, 2019, 28 (3): 034201 doi: 10.1088/1674-1056/28/3/034201
Full Text: [PDF 1684 KB] (Downloads:93) RICH HTML
Show Abstract

At present, research into optical properties of bio-smoke materials mostly concentrates on single band or single germplasm. Herein, we measured the spectral reflectance of three eukaryotic bio-smoke materials and three prokaryotic bio-smoke materials in the waveband from 0.25 μm to 14 μm. Based on the Kramers-Kroning algorithm, the complex refractive index m(λ) was calculated and the Fourier-transform infrared (FTIR) spectra of materials were analyzed. The results show that n(λ) of bio-smoke materials varies between 1.1-2, and n(λ) values in the visible light to near-infrared wavebands are significantly larger than those in other wavebands. The k(λ) of bio-smoke materials varies between 0-0.4. At 6-6.5 μm, k(λ) of prokaryotic materials is 3 times that of eukaryotic materials, which is caused by C=O stretching vibration of amide I and C-N stretching vibration of amide Ⅱ in proteins. At 2.5-3 μm and 9.75 μm, k(λ) values of eukaryotic bio-smoke materials are nearly 2 times that of prokaryotic ones. The absorption peak at 2.5-3 μm is mainly triggered by C-H stretching vibration in lipid and O-H stretching vibration in bound water. The absorption peak at 9.75 μm is mainly caused by symmetric stretching vibration of PO2- in nucleic acids.

High quality 2-μm GaSb-based optically pumped semiconductor disk laser grown by molecular beam epitaxy

Jin-Ming Shang(尚金铭), Jian Feng(冯健), Cheng-Ao Yang(杨成奥), Sheng-Wen Xie(谢圣文), Yi Zhang(张一), Cun-Zhu Tong(佟存柱), Yu Zhang(张宇), Zhi-Chuan Niu(牛智川)
Chin. Phys. B, 2019, 28 (3): 034202 doi: 10.1088/1674-1056/28/3/034202
Full Text: [PDF 1109 KB] (Downloads:103) RICH HTML
Show Abstract

The epitaxial growth conditions and performance of a diode-pumped GaSb-based optically pumped semiconductor disk laser (SDL) emitting near 2.0 μm in an external cavity configuration are reported. The high quality epitaxial structure, grown on Te-doped (001) oriented GaSb substrate by molecular beam epitaxy, consists of a distributed Bragg reflector (DBR), a multi-quantum-well gain region, and a window layer. An intra-cavity SiC heat spreader was attached to the gain chip for effective thermal management. A continuous-wave output power of over 1 W operating at 2.03 μ wavelength operating near room temperature was achieved using a 3% output coupler.

Generation of wide-bandwidth pulse with graphene saturable absorber based on tapered fiber

Ren-Li Zhang(张仁栗), Jun Wang(王俊), Mei-Song Liao(廖梅松), Xia Li(李夏), Pei-Wen Guan(关珮雯), Yin-Yao Liu(刘银垚), Yan Zhou(周延), Wei-Qing Gao(高伟清)
Chin. Phys. B, 2019, 28 (3): 034203 doi: 10.1088/1674-1056/28/3/034203
Full Text: [PDF 566 KB] (Downloads:116) RICH HTML
Show Abstract

Wide-bandwidth pulses were generated with a dispersion-managed erbium-doped passively mode-locked fiber laser based on a graphene saturable absorber. The graphene saturable absorber was composed of a tapered fiber deposited with graphene fabricated by liquid-phase exfoliation. The output pulse had a 3-dB bandwidth of 13.6 nm, which is the widest spectrum ever achieved with graphene-tapered-fiber saturable absorbers.

Aperture efficiency and mode constituent analysis for OAM vortex beam generated by digital metasurface

Di Zhang(张迪), Xiangyu Cao(曹祥玉), Huanhuan Yang(杨欢欢), Jun Gao(高军), Shiqi Lv(吕世奇)
Chin. Phys. B, 2019, 28 (3): 034204 doi: 10.1088/1674-1056/28/3/034204
Full Text: [PDF 3234 KB] (Downloads:140) RICH HTML
Show Abstract

A systematic study of the aperture efficiency and mode constituent for orbital angular momentum (OAM) vortex beam generated by digital metasurface is presented. The aperture efficiency and OAM spectrum are computed for different bit numbers. It is found that the aperture efficiency declines for digital metasurface due to the phase quantization error, especially for 1-bit device. Fortunately, the OAM spectrum is barely affected by phase quantization and the designated main mode keeps dominant for different bit numbers, indicating that high purity OAM vortex beam can be generated by digital metasurface. Besides, the influence of topological charge l is also investigated. For a fixed metasurface, the radiation performance deteriorates sharply with the growing of l and the parasitic OAM mode becomes dominant at certain angle. At last, a prototype of 1-bit metasurface was simulated, fabricated and measured in anechoic chamber. The simulation and experiment results verify the correctness of the numerical analysis.

Propagation dynamics of off-axis noncanonical vortices in a collimated Gaussian beam

Cheng Yin(殷澄), Xuefen Kan(阚雪芬), Hailang Dai(戴海浪), Minglei Shan(单鸣雷), Qingbang Han(韩庆邦), Zhuangqi Cao(曹庄琪)
Chin. Phys. B, 2019, 28 (3): 034205 doi: 10.1088/1674-1056/28/3/034205
Full Text: [PDF 3022 KB] (Downloads:109) RICH HTML
Show Abstract

It is widely accepted that an off-axis noncanonical vortex moves across the free-space diffracting Gaussian beam without rotation. But our analysis shows that the vortex swirls a while before it approaches infinite. By neglecting the divergence of the host beam, we focus on this rotation characteristics of the vortices in linear homogeneous media. For the symmetrical host beam, it is found that the vortex moves along an elliptical trajectory, while the topological charge and the angular momentum of the vortex core relative to the beam axis are conserved. For the asymmetrical host beam, the vortex trajectory is rather complicated, since the noncanonical parameter varies as the light propagates, resulting in topological charge inversion. But we find that the vortices are always confined in a rectangular area, and the rotation direction is determined by the topological charge.

Active hyperspectral imaging with a supercontinuum laser source in the dark

Zhongyuan Guo(郭中源), Yu Liu(刘煜), Xin Zheng(郑鑫), Ke Yin(殷科)
Chin. Phys. B, 2019, 28 (3): 034206 doi: 10.1088/1674-1056/28/3/034206
Full Text: [PDF 2612 KB] (Downloads:92) RICH HTML
Show Abstract

An active hyperspectral imaging (HSI) system was built with a supercontinuum (SC) laser illuminator and a visible/near-infrared hyperspectral camera, which was used for object spectrum detection in the dark. It was demonstrated that the Gaussian-like distribution of the SC illuminator can still be used for accurate reflectance spectrum measurement once the illuminator was characterized in advance. The validity of active HSI results was demonstrated by comparison with passive results. Then, the active HSI system was used to acquire reflectance spectra of different objects in just one push-broom measurement successfully. With algorithms of principal component analysis clustering and unsupervised K-means spectral classification, this active HSI system with high spectral and spatial resolutions was demonstrated to be efficient and applicable for specific spectrum detections.

Investigation and optimization of sampling characteristics of light field camera for flame temperature measurement

Yudong Liu(刘煜东), Md. Moinul Hossain, Jun Sun(孙俊), Biao Zhang(张彪), Chuanlong Xu(许传龙)
Chin. Phys. B, 2019, 28 (3): 034207 doi: 10.1088/1674-1056/28/3/034207
Full Text: [PDF 2041 KB] (Downloads:127) RICH HTML
Show Abstract

It is essential to investigate the light field camera parameters for the accurate flame temperature measurement because the sampling characteristics of the flame radiation can be varied with them. In this study, novel indices of the light field camera were proposed to investigate the directional and spatial sampling characteristics of the flame radiation. Effects of light field camera parameters such as focal length and magnification of the main lens, focal length and magnification of the microlens were investigated. It was observed that the sampling characteristics of the flame are varied with the different parameters of the light field camera. The optimized parameters of the light field camera were then proposed for the flame radiation sampling. The larger sampling angle (23 times larger) is achieved by the optimized parameters compared to the commercial light field camera parameters. A non-negative least square (NNLS) algorithm was used to reconstruct the flame temperature. The reconstruction accuracy was also evaluated by the optimized parameters. The results suggested that the optimized parameters can provide higher reconstruction accuracy for axisymmetric and non-symmetric flame conditions in comparison to the commercial light field camera.

Electromagnetic scattering of charged particles in a strong wind-blown sand electric field

Xingcai Li(李兴财), Xuan Gao(高璇), Juan Wang(王娟)
Chin. Phys. B, 2019, 28 (3): 034208 doi: 10.1088/1674-1056/28/3/034208
Full Text: [PDF 483 KB] (Downloads:95) RICH HTML
Show Abstract

Some field experimental results have shown that the moving sands or dust aerosols in nature are usually electrified, and those charged particles also produce a strong electric field in air, which is named as wind-blown sand electric field. Some scholars have pointed out that the net charge on the particle significantly enhances its electromagnetic (EM) extinction properties, but up to now, there is no conclusive research on the effect of the environmental electric field. Based on the extended Mie theory, the effect of the electric field in a sandstorm on the EM attenuation properties of the charged larger dust particle is studied. The numerical results indicate that the environmental electric field also has a great influence on the particle's optical properties, and the stronger the electric field, the bigger the effect. In addition, the charged angle, the charge density, and the particle radius all have a specific impact on the charged particle's optical properties.

Improved dielectric and electro-optical parameters of nematic liquid crystal doped with magnetic nanoparticles

Geeta Yadav, Govind Pathak, Kaushlendra Agrahari, Mahendra Kumar, Mohd Sajid Khan, V S Chandel, Rajiv Manohar
Chin. Phys. B, 2019, 28 (3): 034209 doi: 10.1088/1674-1056/28/3/034209
Full Text: [PDF 1127 KB] (Downloads:106) RICH HTML
Show Abstract

This study investigates the effect of magnetic nanoparticles (NPs) on the weakly polar nematic liquid crystal (NLC). Different parameters of dielectric data were measured for both the homeotropic and planar aligned samples as a function of frequency and temperature and the substantial changes have been noticed for the doped systems. Dielectric permittivity has been increased after the dispersion of magnetic NPs in the pure NLC. Dielectric anisotropy has also been influenced by incorporating the magnetic NPs with the NLC molecules. These results were attributed to the dipole-dipole interaction between the magnetic nanoparticles and nematic liquid crystal molecules. Electro-optical study indicated the faster rise time and fall time of the doped systems as compare to pure NLC. Threshold voltage has been calculated and found to be decreased for the doped systems. Moreover, we have also calculated the rotational viscosity and the splay elastic constant for pure and the doped systems. Both the rotational viscosity and splay elastic constant of the doped systems are found to be considerably lower than those of pure NLC. Change in these properties has been explained on the basis of molecular disturbances created by the interaction between the magnetic nanoparticle and LC director. This study reveals that the inclusion of magnetic NPs in weakly polar NLC can be useful to enhance the basic properties of the weakly polar NLC and make it a promising material for many display applications.

Axial acoustic radiation force on a fluid sphere between two impedance boundaries for Gaussian beam

Yuchen Zang(臧雨宸), Yupei Qiao(乔玉配), Jiehui Liu(刘杰惠), Xiaozhou Liu(刘晓宙)
Chin. Phys. B, 2019, 28 (3): 034301 doi: 10.1088/1674-1056/28/3/034301
Full Text: [PDF 3302 KB] (Downloads:98) RICH HTML
Show Abstract

The acoustic radiation force on a fluid sphere immersed in water between two boundaries given by a Gaussian beam is theoretically and numerically investigated in this work. Based on the finite series method, the Gaussian beam is expressed in terms of Bessel function and a weighting parameter. The effects of the two boundaries concerned in our study is worked out by the image theory. This work also provides a reference when considering the effects of certain factors such as the radius of the sphere and the distance between the sphere and two boundaries. The contrast with the acoustic radiation force on a fluid sphere near only one boundary is also made in this paper. Our study can offer a theoretical basis for acoustics manipulation, acoustic sensors in the field of biomedical ultrasound and material science.

Multi-bubble motion behavior of electric field based on phase field model

Chang-Sheng Zhu(朱昶胜), Dan Han(韩丹), Li Feng(冯力), Sheng Xu(徐升)
Chin. Phys. B, 2019, 28 (3): 034701 doi: 10.1088/1674-1056/28/3/034701
Full Text: [PDF 10902 KB] (Downloads:117) RICH HTML
Show Abstract

By coupling the phase field model with the continuity equation of incompressible fluid, Navier-Stokes equation, electric field equation, and other governing equations, a multi-field coupling model for multi-bubble coalescence in a viscous fluids is established. The phase field method is used to capture the two-phase interface. The motion and coalescence of a pair of coaxial bubbles under an external uniform electric field and the effects of different electric field strengths on the interaction and coalescence of rising bubbles are studied. The results show that the uniform electric field accelerates the collision and coalescence process of double bubbles in the fluid, and increases the rising velocity of the coalesced bubble. The electric field with an intensity of E=2 kV/mm is reduced about 2 times compared with that without electric field in coalescence time. When the electric field strength is strong (E ≥ 1 kV/mm), the coalesced bubble will rupture before it rises to the top of the calculation area, and the time of the bubble rupturing also decreases with the increase of the electric field strength. The phase field method is compared with the simulation results of Lattice Boltzmann Method (LBM), and the shape of bubble obtained by the two methods is in good agreement, which verifies the correctness of the calculation model.

A combined airfoil with secondary feather inspired by the golden eagle and its influences on the aerodynamics

Di Tang(唐迪), Zhongyong Fan(范忠勇), Mingxia Lei(雷鸣霞), Binbin Lv(吕彬彬), Li Yu(余立), Hao Cui(崔浩)
Chin. Phys. B, 2019, 28 (3): 034702 doi: 10.1088/1674-1056/28/3/034702
Full Text: [PDF 4194 KB] (Downloads:282) RICH HTML
Show Abstract

Bird flight is a remarkable adaption that has allowed thousands of species to colonize all terrestrial habitats. A golden eagle has impressive flying abilities, such as hovering, perching, preying and attacking. To reveal the flying abilities, avian geometry of a golden eagle was extracted based on noncontact surface measurements using a ROMBER three-dimensional laser scanner. Distributions of a camber line, thickness and a secondary feather line of the extracted point cloud were fitted using convenient analytical expressions. A traditional airfoil was established with the camber line and thickness, then a combined airfoil was constructed by combining the traditional airfoil with a secondary feather. Oscillations of an airfoil as well as rapid pitch up were simplified as a sine wave around the quarter chord axis. Thereafter, both steady and unsteady aerodynamic performances of the airfoil are computed, the influences of the secondary feather on the steady and unsteady aerodynamics were further studied.


Numerical study on magneto-Rayleigh-Taylor instabilities for thin liner implosions on the primary test stand facility

Xiao-Guang Wang(王小光), Shun-Kai Sun(孙顺凯), De-Long Xiao(肖德龙), Guan-Qiong Wang(王冠琼), Yang Zhang(张扬), Shao-Tong Zhou(周少彤), Xiao-Dong Ren(任晓东), Qiang Xu(徐强), Xian-Bin Huang(黄显宾), Ning Ding(丁宁), Xiao-Jian Shu(束小建)
Chin. Phys. B, 2019, 28 (3): 035201 doi: 10.1088/1674-1056/28/3/035201
Full Text: [PDF 3246 KB] (Downloads:141) RICH HTML
Show Abstract

The thin aluminum liners with an aspect ratio Rr<<1 have been imploded on the primary test stand (PTS) facility, where R is the outer radius of the liner and Δr is the thickness. The x-ray self-emission images present azimuthally correlated perturbations in the liner implosions. The experiments show that at -10 ns before the stagnation, the wavelengths of perturbation are about 0.93 mm and 1.67 mm for the small-radius and large-radius liners, respectively. We have utilized the resistive magnetohydrodynamic code PLUTO to study the development of magneto-Rayleigh-Taylor (MRT) instabilities under experimental conditions. The calculated perturbation amplitudes are consistent with the experimental observations very well. We have found that both mode coupling and long implosion distance are responsible for the more developed instabilities in the large-radius liner implosions.

Investigation on the drives of the poloidal flow in the ohmic and biased electrode experiments

Yi Yu(余羿), Tao Lan(兰涛), Min Xu(许敏), Yizhi Wen(闻一之)
Chin. Phys. B, 2019, 28 (3): 035202 doi: 10.1088/1674-1056/28/3/035202
Full Text: [PDF 1673 KB] (Downloads:87) RICH HTML
Show Abstract

The experimental investigation on the drives of the poloidal flow in KT-5D tokamak are presented. It is found that the poloidal flow is the main contributor to the radial electric field, and the Reynolds stress can drive significant poloidal flows in ohmic discharges. The investigation on the relationship between the radial gradient of Reynolds stress and the poloidal flow in biasing discharges indicates that not only Reynolds stress but also the Lorentz's force can drive the poloidal flow.

Influence analysis of symmetry on capsule in six-cylinder-port hohlraum Hot!

You Zou(邹游), Wudi Zheng(郑无敌), Xin Li(李欣)
Chin. Phys. B, 2019, 28 (3): 035203 doi: 10.1088/1674-1056/28/3/035203
Full Text: [PDF 1780 KB] (Downloads:210) RICH HTML
Show Abstract

We have investigated the flux symmetry on the capsule in a six-cylinder-port hohlraum for improving the design of the hohlraum. The influence factors of drive symmetry on the capsule in the hohlraum are studied, including laser power, laser beams arrangement, hohlraum geometric parameters, plasma condition, capsule convergence, etc. The x-ray radiation flux distribution on the capsule is obtained based on the three-dimensional view factor model. In the six-cylinder-port hohlraum, the main drive asymmetry is the C40 mode asymmetry. When the C40 mode asymmetry approaches zero, the drive symmetry on the capsule is optimal. Our results demonstrate that in order to have a high flux symmetry on the capsule in the laser main-pulse stage, more negative initial C40 modes are needed, which can be realized by adjusting the hohlraum geometry parameters. The hohlraum with column length LH=4.81 mm has an optimal symmetry in the laser main-pulse stage.

Transmission properties of microwave in rectangular waveguide through argon plasma

Xiaoyu Han(韩晓宇), Dawei Li(李大伟), Meie Chen(陈美娥), Zhan Zhang(张展), Zheng Li(李铮), Yujian Li(李雨键), Junhong Wang(王均宏)
Chin. Phys. B, 2019, 28 (3): 035204 doi: 10.1088/1674-1056/28/3/035204
Full Text: [PDF 1335 KB] (Downloads:91) RICH HTML
Show Abstract

To study the impact of plasma generated by microwave breakdown on the propagation properties of microwave in high power microwave (HPM) devices, a three-dimensional (3-D) fluid model of argon plasma slab in rectangular waveguide is established and calculated by the finite-difference-time-domain (FDTD) method. A rectangular waveguide with a breakdown chamber filled with argon is set as the physics model, and HPM with frequency of 3-50 GHz propagates through this physics model. The time evolutions of the breakdown process are investigated, the reflection, transmission, and absorption coefficients of HPM are calculated, and the influences of some important parameters, including the thickness of the plasma slab and the microwave frequency on the propagation properties of the microwave are shown. Results of this work can offer theoretical instructions for suppressing the influence of breakdown to the performance of HPM devices, and for the use of microwave breakdown, such as the design of plasma limiter or absorber in HPM devices.


Physical properties of B4N4-I and B4N4-Ⅱ: First-principles study

Zhenyang Ma(马振洋), Peng Wang(王鹏), Fang Yan(阎芳), Chunlei Shi(史春蕾), Yi Tian(田毅)
Chin. Phys. B, 2019, 28 (3): 036101 doi: 10.1088/1674-1056/28/3/036101
Full Text: [PDF 1856 KB] (Downloads:99) RICH HTML
Show Abstract

The structural, mechanical, electronic, mechanical anisotropy, and thermal properties of boron nitride (BN) polymorphs, such as B4N4-I and B4N4-Ⅱ, are investigated under ambient pressure utilizing first-principles generalized gradient approximation calculations using an ultrasoft pseudopotential scheme. The phonon spectra and elastic constants reveal that B4N4-I is dynamically and mechanically stable at the pressure of 0 GPa and temperature of 0 K. Anisotropic calculations indicate that both B4N4-I and B4N4-Ⅱ exhibit higher anisotropy of Young's modulus than cubic BN (c-BN). B4N4-Ⅱ and B4N4-I present indirect and wide band gaps of 5.32 eV and 4.86 eV, respectively. In addition, B4N4-I is more brittle than B4N4-Ⅱ. Moreover, the minimum thermal conductivity, κmin, of B4N4-Ⅱ at 300 K is 1.92 W/(cm·K), which is slightly higher than those of B4N4-I and c-BN (1.84 W/(cm·K) and 1.83 W/(cm·K), respectively. However, κmin of B4N4-I is slightly higher than that of c-BN.

Confinement-induced modulation of elastic properties of nano-confined fluids in slit pore

Zong-Li Sun(孙宗利), Yan-Shuang Kang(康艳霜), Yan-Mei Kang(康艳梅)
Chin. Phys. B, 2019, 28 (3): 036102 doi: 10.1088/1674-1056/28/3/036102
Full Text: [PDF 582 KB] (Downloads:100) RICH HTML
Show Abstract

Based on statistical mechanics for classical fluids, the general expressions for the elastic moduli of inhomogeneous fluid are derived and expressed as functionals of density functions. Within the framework of classical density functional theory, the bulk modulus of confined argon in slit pore is calculated under different conditions. The effects of vapor pressure, temperature, and pore width on modulus are calculated and investigated. Obvious confinement-induced effect has been observed in the confined argon. In addition, the solvation pressure dependence of the bulk modulus is also investigated, and the results suggest that the Tait-Murnaghan equation is still valid for the confined fluids.

Phase transitions in bismuth under rapid compression Hot!

Dong-Liang Yang(杨栋亮), Jing Liu(刘景), Chuan-Long Lin(林传龙), Qiu-Min Jing(敬秋民), Yi Zhang(张毅), Yu Gong(宫宇), Yan-Chun Li(李延春), Xiao-Dong Li(李晓东)
Chin. Phys. B, 2019, 28 (3): 036201 doi: 10.1088/1674-1056/28/3/036201
Full Text: [PDF 456 KB] (Downloads:154) RICH HTML
Show Abstract

The structural phase transitions of bismuth under rapid compression has been investigated in a dynamic diamond anvil cell using time-resolved synchrotron x-ray diffraction. As the pressure increases, the transformations from phase I, to phase Ⅱ, to phase Ⅲ, and then to phase V have been observed under different compression rates at 300 K. Compared with static compression results, no new phase transition sequence appears under rapid compression at compression rate from 0.20 GPa/s to 183.8 GPa/s. However, during the process across the transition from phase Ⅲ to phase V, the volume fraction of product phase as a function of pressure can be well fitted by a compression-rate-dependent sigmoidal curve. The resulting parameters indicate that the activation energy related to this phase transition, as well as the onset transition pressure, shows a compression-rate-dependent performance. A strong dependence of over-pressurization on compression rate occurs under rapid compression. A formula for over-pressure has been proposed, which can be used to quantify the over-pressurization.

Full filling of mesoporous carbon nanotubes by aqueous solution at room temperature

Xiao-Na Ren(任晓娜), Min Xia(夏敏), Qing-Zhi Yan(燕青芝), Chang-Chun Ge(葛昌纯)
Chin. Phys. B, 2019, 28 (3): 036801 doi: 10.1088/1674-1056/28/3/036801
Full Text: [PDF 5910 KB] (Downloads:91) RICH HTML
Show Abstract

Carbon nanotubes (CNTs) have the ideal structure to be used as templates for nanomaterials, especially for nanowires, and the tungsten nanowire is an important nanomaterial that is used as a strengthening phase. Therefore, we have proposed to apply mesoporous CNT (mCNT) as a template to prepare tungsten nanowires. However, the tungsten precursor should fill the hollow tube of mCNT firstly, and very few related studies have been reported. In this paper, we have systematically studied the filling process of ammonium metatungstate (AMT) aqueous solution. The results reveal that owing to the mesopores in the mCNT sidewall, the AMT can be encapsulated into the tube at room temperature (RT) and we can fully fill it without destroying the structure. In addition, vibration and solute concentration are also important factors. Besides, the mesoporous sidewall and hollow tubular core structure of mCNT are prerequisites to realize full filling. Furthermore, tungsten nanowires have been obtained after reduction of AMT in mCNTs.

Controllable fabrication of self-organized nano-multilayers in copper-carbon films

Wei-Qi Wang(王伟奇), Li Ji(吉利), Hong-Xuan Li(李红轩), Xiao-Hong Liu(刘晓红), Hui-Di Zhou(周惠娣), Jian-Min Chen(陈建敏)
Chin. Phys. B, 2019, 28 (3): 036802 doi: 10.1088/1674-1056/28/3/036802
Full Text: [PDF 4334 KB] (Downloads:82) RICH HTML
Show Abstract

In order to clarify the influence of methane concentration and deposition time on self-organized nano-multilayers, three serial copper-carbon films have been prepared at various methane concentrations with different deposition times using a facile magnetron sputtering deposition system. The ratios of methane concentration (CH4/Ar+CH4) used in the experiments are 20%, 40%, and 60%, and the deposition times are 5 minutes, 20 minutes, and 40 minutes, respectively. Despite the difference in the growth conditions, self-organizing multilayered copper-carbon films are prepared at different deposition times by changing methane concentration. The film composition and microstructure are investigated by x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM). By comparing the composition and microstructure of three serial films, the optimal growth conditions and compositions for self-organizing nano-multilayers in copper-carbon film are acquired. The results demonstrate that the self-organized nano-multilayered structure prefers to form in two conditions during the deposition process. One is that the methane should be curbed at low concentration for long deposition time, and the other condition is that the methane should be controlled at high concentration for short deposition time. In particular, nano-multilayered structure is self-organized in the copper-carbon film with copper concentration of 10-25 at.%. Furthermore, an interesting microstructure transition phenomenon is observed in copper-carbon films, that is, the nano-multilayered structure is gradually replaced by a nano-composite structure with deposition time and finally covered by amorphous carbon.


Graphene-like Be3X2 (X=C, Si, Ge, Sn): A new family of two-dimensional topological insulators

Lingling Song(宋玲玲), Lizhi Zhang(张礼智), Yurou Guan(官雨柔), Jianchen Lu(卢建臣), Cuixia Yan(闫翠霞), Jinming Cai(蔡金明)
Chin. Phys. B, 2019, 28 (3): 037101 doi: 10.1088/1674-1056/28/3/037101
Full Text: [PDF 1748 KB] (Downloads:209) RICH HTML
Show Abstract

Using first-principle calculations, we predict a new family of stable two-dimensional (2D) topological insulators (TI), monolayer Be3X2 (X=C, Si, Ge, Sn) with honeycomb Kagome lattice. Based on the configuration of Be3C2, which has been reported to be a 2D Dirac material, we construct the other three 2D materials and confirm their stability according to their chemical bonding properties and phonon-dispersion relationships. Because of their tiny spin-orbit coupling (SOC) gaps, Be3C2 and Be3Si2 are 2D Dirac materials with high Fermi velocity at the same order of magnitude as that of graphene. For Be3Ge2 and Be3Sn2, the SOC gaps are 1.5 meV and 11.7 meV, and their topological nontrivial properties are also confirmed by their semi-infinite Dirac edge states. Our findings not only extend the family of 2D Dirac materials, but also open an avenue to track new 2DTI.

Negative differential resistance and quantum oscillations in FeSb2 with embedded antimony

Fangdong Tang(汤方栋), Qianheng Du(杜乾衡), Cedomir Petrovic, Wei Zhang(张威), Mingquan He(何明全), Liyuan Zhang(张立源)
Chin. Phys. B, 2019, 28 (3): 037104 doi: 10.1088/1674-1056/28/3/037104
Full Text: [PDF 1112 KB] (Downloads:174) RICH HTML
Show Abstract

We present a systematical study on single crystalline FeSb2 using electrical transport and magnetic torque measurements at low temperatures. Nonlinear magnetic field dependence of Hall resistivity demonstrates a multi-carrier transport instinct of the electronic transport. Current-controlled negative differential resistance (CC-NDR) observed in current-voltage characteristics below~7 K is closely associated with the intrinsic transition~5 K of FeSb2, which is, however, mediated by extrinsic current-induced Joule heating effect. The antimony crystallized in a preferred orientation within the FeSb2 lattice in the high-temperature synthesis process leaves its fingerprint in the de Haas-Van Alphen (dHvA) oscillations, and results in the regular angular dependence of the oscillating frequencies. Nevertheless, possible existence of intrinsic non-trivial states cannot be completely ruled out. Our findings call for further theoretical and experimental studies to explore novel physics on flux-free grown FeSb2 crystals.

Stacked lateral double-diffused metal-oxide-semiconductor field effect transistor with enhanced depletion effect by surface substrate

Qi Li(李琦), Zhao-Yang Zhang(张昭阳), Hai-Ou Li(李海鸥), Tang-You Sun(孙堂友), Yong-He Chen(陈永和), Yuan Zuo(左园)
Chin. Phys. B, 2019, 28 (3): 037201 doi: 10.1088/1674-1056/28/3/037201
Full Text: [PDF 1984 KB] (Downloads:107) RICH HTML
Show Abstract

A stacked lateral double-diffused metal-oxide-semiconductor field-effect transistor (LDMOS) with enhanced depletion effect by surface substrate is proposed (ST-LDMOS), which is compatible with the traditional CMOS processes. The new stacked structure is characterized by double substrates and surface dielectric trenches (SDT). The drift region is separated by the P-buried layer to form two vertically parallel devices. The doping concentration of the drift region is increased benefiting from the enhanced auxiliary depletion effect of the double substrates, leading to a lower specific on-resistance (Ron,sp). Multiple electric field peaks appear at the corners of the SDT, which improves the lateral electric field distribution and the breakdown voltage (BV). Compared to a conventional LDMOS (C-LDMOS), the BV in the ST-LDMOS increases from 259 V to 459 V, an improvement of 77.22%. The Ron,sp decreases from 39.62 mΩ·cm2 to 23.24 mΩ·cm2 and the Baliga's figure of merit (FOM) of is 9.07 MW/cm2.

Magnetization-direction-dependent inverse spin Hall effect observed in IrMn/NiFe/Cu/YIG multilayer structure

Runrun Hao(郝润润), Ruxue Zang(臧如雪), Tie Zhou(周铁), Shishou Kang(康仕寿), Shishen Yan(颜世申), Guolei Liu(刘国磊), Guangbing Han(韩广兵), Shuyun Yu(于淑云), Liangmo Mei(梅良模)
Chin. Phys. B, 2019, 28 (3): 037202 doi: 10.1088/1674-1056/28/3/037202
Full Text: [PDF 1501 KB] (Downloads:107) RICH HTML
Show Abstract

The magnetization-direction-dependent inverse spin Hall effect (ISHE) has been observed in NiFe film during spin Seebeck measurement in IrMn/NiFe/Cu/yttrium iron garnet (YIG) multilayer structure, where the YIG and NiFe layers act as the spin injector and spin current detector, respectively. By using the NiFe/IrMn exchange bias structure, the magnetization direction of YIG (MYIG) can be rotated with respect to that of NiFe (MNiFe) with a small magnetic field, thus allowing us to observe the magnetization-direction-dependent inverse spin Hall effect voltage in NiFe layer. Compared with the situation that polarization direction of spin current (σs) is perpendicular to MNiFe, the spin Seebeck voltage is about 30% larger than that when σs and MNiFe are parallel to each other. This phenomenon may originate from either or both of stronger interface or bulk scattering to spin current when σs and MNiFe are perpendicular to each other. Our work provides a way to control the voltage induced by ISHE in ferromagnets.

Hydrogenated antimonene as quantum spin Hall insulator: A first-principles study

Xin He(贺欣), Ji-Biao Li(李佶彪)
Chin. Phys. B, 2019, 28 (3): 037301 doi: 10.1088/1674-1056/28/3/037301
Full Text: [PDF 1207 KB] (Downloads:115) RICH HTML
Show Abstract

Using first-principles calculations based on density functional theory (DFT), the structural and electronic properties of hydrogenated antimonene have been systematically investigated. Phonon dispersion and molecular dynamics (MD) simulation reveal that fully hydrogenated (FH) antimonene has high dynamic stability and could be synthesized. A new σ-type Dirac cone related to Sb-px,y orbitals is found in FH antimonene, which is robust to tensile strain. Noticeably, the spin orbital coupling (SOC) opens a quantum spin Hall (QSH) gap of 425 meV at the Dirac cone, sufficiently large for practical applications at room temperature. Semi-hydrogenated antimonene is a non-magnetic metal. Our results show that FH antimonene may have great potential applications in next generation high-performance devices.

Mechanism of Ti/Al/Ni/Au ohmic contacts to AlGaN/GaN heterostructures via laser annealing

Mingchen Hou(侯明辰), Gang Xie(谢刚), Kuang Sheng(盛况)
Chin. Phys. B, 2019, 28 (3): 037302 doi: 10.1088/1674-1056/28/3/037302
Full Text: [PDF 2166 KB] (Downloads:129) RICH HTML
Show Abstract

The physical mechanisms of Ti/Al/Ni/Au ohmic contacts to AlGaN/GaN heterostructures by laser annealing and rapid thermal annealing are systematically investigated. The microstructures indicate that a better surface morphology and an intact contact interface are formed after laser annealing. None of the TiN alloy spikes are formed at the interface of the laser annealing sample. The experimental results show that the current transport mechanism through the ohmic contact after laser annealing is different from the conventional spike mechanism, and it is dominated by thermionic field emission.

Antiferromagnetic interlayer coupling of (111)-oriented La0.67Sr0.33MnO3/SrRuO3 superlattices

Hui Zhang(张慧), Jing Zhang(张静), Jin-E Zhang(张金娥), Fu-Rong Han(韩福荣), Hai-Lin Huang(黄海林), Jing-Hua Song(宋京华), Bao-Gen Shen(沈保根), Ji-Rong Sun(孙继荣)
Chin. Phys. B, 2019, 28 (3): 037501 doi: 10.1088/1674-1056/28/3/037501
Full Text: [PDF 773 KB] (Downloads:136) RICH HTML
Show Abstract

We report a strong antiferromagnetic (AFM) interlayer coupling in ferromagnetic La0.67Sr0.33MnO3/SrRuO3 (LSMO/SRO) superlattices grown on (111)-oriented SrTiO3 substrate. Unlike the (001) superlattices for which the spin alignment between LSMO and SRO is antiparallel in the in-plane direction and parallel in the out-of-plane direction, the antiparallel alignment is observed along both the in-plane and out-of-plane directions in the present sample. The low temperature hysteresis loop demonstrates two-step magnetic processes, indicating the coexistence of magnetically soft and hard components. Moreover, an inverted hysteresis loop was observed. Exchange bias tuned by the temperature and cooling field was also investigated, and positive as well as negative exchange bias was observed at the same temperature with the variation of the cooling field. A very large exchange field (HEB) was observed and both magnitude and sign of the HEB depend on the cooling field, which can be attributed to an interplay of Zeeman energy and AFM coupling energy at the interfaces. The present work shows the great potential of tuning a spin texture through interfacial engineering for the complex oxides whose spin state is jointly determined by strongly competing mechanisms.

Micromagnetic simulations of reversal magnetization in cerium-containing magnets

Lei Li(李磊), Shengzhi Dong(董生智), Hongsheng Chen(陈红升), Ruijiao Jiang(姜瑞姣), Dong Li(李栋), Rui Han(韩瑞), Dong Zhou(周栋), Minggang Zhu(朱明刚), Wei Li(李卫), Wei Sun(孙威)
Chin. Phys. B, 2019, 28 (3): 037502 doi: 10.1088/1674-1056/28/3/037502
Full Text: [PDF 1476 KB] (Downloads:114) RICH HTML
Show Abstract

Single-grain models with different cerium contents or structural parameters have been introduced to investigate the reversal magnetization behaviors in cerium-containing magnets. All the micromagnetic simulations are carried out via the object oriented micromagnetic framework (OOMMF). As for single (Nd,Ce)2Fe14B type grain, the coercivity decreases monotonously with the increase of the cerium content. Four types of grain structure have been compared:single (Nd,Ce)2Fe14B type, core ((Nd,Ce)2Fe14B)-shell (Nd2Fe14B) type with 2 nm thick shell, core (Ce2Fe14B)-shell (Nd2Fe14B) type, and core (Nd2Fe14B)-shell (Ce2Fe14B) type. It is found that core ((Nd,Ce)2Fe14B)-shell (Nd2Fe14B) type grain with 2 nm thick shell always presents the largest coercivity under the same total cerium content. Furthermore, the relationship between the coercivity and the shell thickness t in core ((Nd,Ce)2Fe14B)-shell (Nd2Fe14B) type grain has been studied. When the total cerium content is kept at 20.51 at.%, the analyzed results show that as t varies from 1 nm to 7 nm, the coercivity gradually ascends at the beginning, then quickly descends after reaching the maximum value when t=5 nm. From the perspective of the positions of nucleation points, the reasons why t affects the coercivity are discussed in detail.

Structures and local ferroelectric polarization switching properties of orthorhombic YFeO3 thin film prepared by a sol-gel method

Runlan Zhang(张润兰), Shuaishuai Li(李帅帅), Changle Chen(陈长乐), Li-An Han(韩立安), Shanxin Xiong(熊善新)
Chin. Phys. B, 2019, 28 (3): 037701 doi: 10.1088/1674-1056/28/3/037701
Full Text: [PDF 1693 KB] (Downloads:225) RICH HTML
Show Abstract

Orthorhombic YFeO3 thin film was prepared on La0.67Sr0.33MnO3/LaAlO3 substrate by a sol-gel spin-coating method. The structures of the YFeO3/La0.67Sr0.33MnO3/LaAlO3 (YFO/LSMO/LAO) sample were detected by x-ray diffraction pattern, Raman spectrometer, scanning electron microscopy, and atomic force microscope. The local ferroelectric polarization switching properties of the orthorhombic YFO film were confirmed by piezoresponse force microscopy (PFM) for the first time. The results show that the YFO film deposited on LSMO/LAO possesses orthorhombic structure, with ultra-fine crystal grains and flat surface. The leakage current of the YFO film is 8.39×10-4 A·cm-2 at 2 V, with its leakage mechanism found to be an ohmic behavior. PFM measurements indicate that the YFO film reveals weak ferroelectricity at room temperature and the local switching behavior of ferroelectric domains has been identified. By local poling experiment, polarization reversal in the orthorhombic YFO film at room temperature was further observed.

Spectra properties of Yb3+, Er3+: Sc2SiO5 crystal

Yanyan Xue(薛艳艳), Lihe Zheng(郑丽和), Dapeng Jiang(姜大朋), Qinglin Sai(赛青林), Liangbi Su(苏良碧), Jun Xu(徐军)
Chin. Phys. B, 2019, 28 (3): 037802 doi: 10.1088/1674-1056/28/3/037802
Full Text: [PDF 579 KB] (Downloads:97) RICH HTML
Show Abstract

The influence of Er3+ ions on the spectra of Yb3+, Er3+:Sc2SiO5 (SSO) single crystal, which was obtained by Czochralski (Cz) method, is discussed. The absorption coefficient at 980 nm was 13.36 cm-1 with a peak absorption cross-section of 1.46×10-20 cm2. The emission cross-sections at 1034 nm and 1062 nm were 5.5×10-21 cm2 and 4.9×10-21 cm2, respectively. The fluorescence lifetime was estimated as 1.24 ms at 1061 nm. The mechanical properties of SSO single crystal were also presented.


Effect of metal fluorides on chromium ions doped bismuth borate glasses for optical applications

L Haritha, K Chandra Sekhar, R Nagaraju, G Ramadevudu, Vasanth G Sathe, Md. Shareefuddin
Chin. Phys. B, 2019, 28 (3): 038101 doi: 10.1088/1674-1056/28/3/038101
Full Text: [PDF 856 KB] (Downloads:113) RICH HTML
Show Abstract

Fluoride based glasses with composition CaF2-ZnF2-Bi2O3-B2O3 doped with chromium ions have been investigated using physical, optical, electron paramagnetic resonance (EPR), Fourier-transform infrared spectroscopy (FTIR), and Raman studies. The amorphous nature of samples was confirmed from x-ray diffraction spectra. The density is evaluated from the Archimedes principle and the values of optical band gap and Urbach energy values were evaluated from the optical absorption spectra. Thus, molar volume, refractive index, etc., were also evaluated. The observed decrease in density and the optical band gap with CaF2 is explained using the crystalline density of metal fluorides and the ionicity of fluorine ions, respectively. The three peaks near 450 nm, 606 nm, and 720 nm, which are shown in the absorption spectra, are accredited to 4A2g4T1g, 4A2g→→4T2g, 4A2g2E transitions, respectively. Resonance signals at g≈ 4.82 and g≈ 1.99 were observed in EPR spectra which are assigned. FTIR and Raman analysis were carried out to examine the impact of metal fluorides on the structure of bismuth borate glasses.

Realizing photomultiplication-type organic photodetectors based on C60-doped bulk heterojunction structure at low bias

Wei Gong(龚伟), Tao An(安涛), Xinying Liu(刘欣颖), Gang Lu(卢刚)
Chin. Phys. B, 2019, 28 (3): 038501 doi: 10.1088/1674-1056/28/3/038501
Full Text: [PDF 1253 KB] (Downloads:121) RICH HTML
Show Abstract

Photomultiplication (PM) structure has been widely employed to improve the optoelectronic performance of organic photodetectors (OPDs). However, most PM-type OPDs require a high negative operating voltage or complex fabrication. For obtaining high-efficiency OPDs with low voltage and easy process, here the bulk heterojunction (BHJ) structure of high exciton dissociation efficiency combined with the method of trap-assisted PM are applied to the OPDs. In this paper, we investigate the operating mechanism of OPDs based on poly(3-hexylthiophene) (P3HT):(phenyl-C61-butyric-acid-methyl-ester) (PC61BM), and poly-{[4,8-bis[(2-ethylhexyl)oxy]-benzo[1,2-b:4,5-b]dithiophene-2,6-diyl]-alt-[3-fluore-2-(octyloxy)carbonyl-thieno[3,4-b]thiophene-4,6-diyl]} (PBDT-TT-F):PC61BM doped with C60 as active layer. Furthermore, the influence of C60 concentration on the optoelectronic performances is also discussed. With 1.6 wt.% C60 added, the P3HT:PC61BM:C60 OPD exhibits a 327.5% external quantum efficiency, a 1.21 A·W-1 responsivity, and a 4.22×1012 Jones normalized detectivity at -1 V under 460 nm (0.21 mW·cm-2) illumination. The experimental results show that the effective electron traps can be formed by doping a small weight of C60 into BHJ active layer. Thus the PM-type OPDs can be realized, which benefits from the cathode hole tunneling injection assisted by the trapped electrons in C60 near the Al side. The efficiency of PM is related to the C60 concentration. The present study provides theoretical basis and method for the design of highly sensitive OPDs with low operating voltage and facile fabrication.

Double superlattice structure for improving the performance of ultraviolet light-emitting diodes

Yan-Li Wang(王燕丽), Pei-Xian Li(李培咸), Sheng-Rui Xu(许晟瑞), Xiao-Wei Zhou(周小伟), Xin-Yu Zhang(张心禹), Si-Yu Jiang(姜思宇), Ru-Xue Huang(黄茹雪), Yang Liu(刘洋), Ya-Li Zi(訾亚丽), Jin-Xing Wu(吴金星), Yue Hao(郝跃)
Chin. Phys. B, 2019, 28 (3): 038502 doi: 10.1088/1674-1056/28/3/038502
Full Text: [PDF 818 KB] (Downloads:102) RICH HTML
Show Abstract

The novel AlGaN-based ultraviolet light-emitting diodes (UV-LEDs) with double superlattice structure (DSL) are proposed and demonstrated by numerical simulation and experimental verification. The DSL consists of 30-period Mg modulation-doped p-AlGaN/u-GaN superlattice (SL) and 4-period p-AlGaN/p-GaN SL electron blocking layer, which are used to replace the p-type GaN layer and electron blocking layer of conventional UV-LEDs, respectively. Due to the special effects and interfacial stress, the AlGaN/GaN short-period superlattice can reduce the acceptor ionization energy of the p-type regions, thereby increasing the hole concentration. Meanwhile, the multi-barrier electron blocking layers are effective in suppressing electron leakage and improving hole injection. Experimental results show that the enhancements of 22.5% and 37.9% in the output power and external quantum efficiency at 120 mA appear in the device with double superlattice structure.

High quantum efficiency long-/long-wave dual-color type-Ⅱ InAs/GaSb infrared detector

Zhi Jiang(蒋志), Yao-Yao Sun(孙姚耀), Chun-Yan Guo(郭春妍), Yue-Xi Lv(吕粤希), Hong-Yue Hao(郝宏玥), Dong-Wei Jiang(蒋洞微), Guo-Wei Wang(王国伟), Ying-Qiang Xu(徐应强), Zhi-Chuan Niu(牛智川)
Chin. Phys. B, 2019, 28 (3): 038504 doi: 10.1088/1674-1056/28/3/038504
Full Text: [PDF 958 KB] (Downloads:116) RICH HTML
Show Abstract

A long-/long-wave dual-color detector with N-M-π-B-π-M-N structure was developed based on a type-Ⅱ InAs/GaSb superlattice. The saturated responsivity was achieved under low bias voltage for both channels. The device could be operated as a single detector for sequential detection and showed high quantum efficiencies. The peak quantum efficiencies of long-wavelength infrared band-1 (blue channel) and long-wavelength infrared band-2 (red channel) were 44% at 6.3 μm under 20 mV and 57% at 9.1 μm under -60 mV, respectively. The optical performance for each channel was achieved using a 2μm thickness absorber. Due to the high QE, the specific detectivities of the blue and red channels reached 5.0×1011 cm·Hz1/2/W at 6.8 μm and 3.1×1011 cm·Hz1/2/W at 9.1 μm, respectively, at 77 K.

Enhancing convolutional neural network scheme forrheumatoid arthritis grading with limited clinical data

Jian Tang(汤键), Zhibin Jin(金志斌), Xue Zhou(周雪), Weijing Zhang(张玮婧), Min Wu(吴敏), Qinghong Shen(沈庆宏), Qian Cheng(程茜), Xueding Wang(王学鼎), Jie Yuan(袁杰)
Chin. Phys. B, 2019, 28 (3): 038701 doi: 10.1088/1674-1056/28/3/038701
Full Text: [PDF 2282 KB] (Downloads:108) RICH HTML
Show Abstract

The gray-scale ultrasound (US) imaging method is usually used to assess synovitis in rheumatoid arthritis (RA) in clinical practice. This four-grade scoring system depends highly on the sonographer's experience and has relatively lower validity compared with quantitative indexes. However, the training of a qualified sonographer is expensive and time-consuming while few studies focused on automatic RA grading methods. The purpose of this study is to propose an automatic RA grading method using deep convolutional neural networks (DCNN) to assist clinical assessment. Gray-scale ultrasound images of finger joints are taken as inputs while the output is the corresponding RA grading results. Firstly, we performed the auto-localization of synovium in the RA image and obtained a high precision in localization. In order to make up for the lack of a large annotated training dataset, we performed data augmentation to increase the number of training samples. Motivated by the approach of transfer learning, we pre-trained the GoogLeNet on ImageNet as a feature extractor and then fine-tuned it on our own dataset. The detection results showed an average precision exceeding 90%. In the experiment of grading RA severity, the four-grade classification accuracy exceeded 90% while the binary classification accuracies exceeded 95%. The results demonstrate that our proposed method achieves performances comparable to RA experts in multi-class classification. The promising results of our proposed DCNN-based RA grading method can have the ability to provide an objective and accurate reference to assist RA diagnosis and the training of sonographers.

Exploring evolutionary features of directed weighted hazard network in the subway construction

Gong-Yu Hou(侯公羽), Cong Jin(靳聪), Zhe-Dong Xu(许哲东), Ping Yu(于萍), Yi-Yi Cao(曹怡怡)
Chin. Phys. B, 2019, 28 (3): 038901 doi: 10.1088/1674-1056/28/3/038901
Full Text: [PDF 999 KB] (Downloads:98) RICH HTML
Show Abstract

A better understanding of previous accidents is an effective way to reduce the occurrence of similar accidents in the future. In this paper, a complex network approach is adopted to construct a directed weighted hazard network (DWHN) to analyze topological features and evolution of accidents in the subway construction. The nodes are hazards and accidents, the edges are multiple relationships of these nodes and the weight of edges are occurrence times of repetitive relationships. The results indicate that the DWHN possesses the property of small-world with small average path length and large clustering coefficient, indicating that hazards have better connectivity and will spread widely and quickly in the network. Moreover, the DWHN has the property of scale-free network for the cumulative degree distribution follows a power-law distribution. It makes DWHN more vulnerable to target attacks. Controlling key nodes with higher degree, strength and betweenness centrality will destroy the connectivity of DWHN and mitigate the spreading of accidents in the network. This study is helpful for discovering inner relationships and evolutionary features of hazards and accidents in the subway construction.

Copyright © the Chinese Physical Society
Address: Institute of Physics, Chinese Academy of Sciences, P. O. Box 603,Beijing 100190 China(100190)
Tel: 010-82649026   Fax: 010-82649027   E-Mail:
Supported by Beijing Magtech Co. Ltd. Tel: 86-010-62662699 E-mail: