Chin. Phys. B
Citation Search Quick Search

ISSN 1674-1056 (Print)
CN 11-5639/O4
   » About CPB
   » Editorial Board
   » SCI IF
   » Staff
   » Contact
Browse CPB
   » In Press
   » Current Issue
   » Earlier Issues
   » View by Fields
   » Top Downloaded
   » Sci Top Cited
   » Submit an Article
   » Manuscript Tracking
   » Call for Papers
   » Scope
   » Instruction for Authors
   » Copyright Agreement
   » Templates
   » Author FAQs
   » PACS
   » Review Policy
   » Referee Login
   » Referee FAQs
   » Editor in Chief Login
   » Editor Login
   » Office Login
HighLights More»   
  • New layered metal oxides as positive electrode materials for room-temperature sodium-ion batteries

    Mu Lin-Qin, Hu Yong-Sheng, Chen Li-Quan
    Chin. Phys. B 2015, 24 (3): 038202
    In order to achieve better Na storage performance, most layered oxide positive electrode materials contain toxic and expensive transition metals Ni and/or Co, which are also widely used for lithium-ion batteries. Here we report a new quaternary layered oxide consisting of Cu, Fe, Mn, and Ti transiti...

  • A tunable magnetically insulated transmission line oscillator

    Fan Yu-Wei, Wang Xiao-Yu, He Liang, Zhong Hui-Huang, Zhang Jian-De
    Chin. Phys. B 2015, 24 (3): 035203
    A tunable magnetically insulated transmission line oscillator (MILO) is put forward and simulated. When the MILO is driven by a 430 kV, 40.6 kA electron beam, high-power microwave is generated with a peak output power of 3.0 GW and frequency of 1.51 GHz, and the relevant power conversion efficiency ...

  • Water-assisted highly enhanced crystallographic etching of graphene by iron catalysts

    Xue Lei-Jiang, Yu Fang, Zhou Hai-Qing, Sun Lian-Feng
    Chin. Phys. B 2015, 24 (3): 036802
    We report the assisted role of water vapor in crystallographic cutting of graphene via iron catalysts in reduced atmosphere. Without water, graphene can be tailored with smooth trenches composed of straight lines with angles of 60° or 120° between two adjacent trenches. After the addition of...

  • Correlation between the magic wavelengths and the polarization direction of the linearly polarized laser in the Ca+ optical clock

    Liu Pei-Liang, Huang Yao, Bian Wu, Shao Hu, Qian Yuan, Guan Hua, Tang Li-Yan, Gao Ke-Lin
    Chin. Phys. B 2015, 24 (3): 039501
    The magic wavelengths for different Zeeman components are measured based on the 40Ca+ optical clock. The dynamic dipole polarizability of a non-zero angular moment level has correlation with the polarization direction of the linearly polarized laser beam, and we show that the four hyperfine structur...

Chin. Phys. B  
  Chin. Phys. B--2015, Vol.24, No.3
Select | Export to EndNote

Nonlocal symmetries and negative hierarchies related to bilinear Bäcklund transformation

Hu Xiao-Rui, Chen Yong
Chin. Phys. B, 2015, 24 (3): 030201 doi: 10.1088/1674-1056/24/3/030201
Full Text: [PDF 200 KB] (Downloads:693) RICH HTML
Show Abstract

In this paper, nonlocal symmetries defined by bilinear Bäcklund transformation for bilinear potential KdV (pKdV) equation are obtained. By introducing an auxiliary variable which just satisfies the Schwartzian form of KdV (SKdV) equation, the nonlocal symmetry is localized and the Levi transformation is presented. Besides, based on three different types of nonlocal symmetries for potential KdV equation, three sets of negative pKdV hierarchies along with their bilinear forms are constructed. An impressive result is that the coefficients of the third type of (bilinear) negative pKdV hierarchy (N>0) are variable, which are obtained via introducing an arbitrary parameter by considering the translation invariance of the pKdV equation.

Explicit solutions from residual symmetry of the Boussinesq equation

Liu Xi-Zhong, Yu Jun, Ren Bo
Chin. Phys. B, 2015, 24 (3): 030202 doi: 10.1088/1674-1056/24/3/030202
Full Text: [PDF 221 KB] (Downloads:778) RICH HTML
Show Abstract
The Bäcklund transformation related symmetry is nonlocal, which is hard to be applied in constructing solutions for nonlinear equations. In this paper, the residual symmetry of the Boussinesq equation is localized to Lie point symmetry by introducing multiple new variables. By applying the general Lie point method, two main results are obtained: a new type of Bäcklund transformation is derived, from which new solutions can be generated from old ones; the similarity reduction solutions as well as corresponding reduction equations are found. The localization procedure provides an effective way to investigate interaction solutions between nonlinear waves and solitons.

Controllability of fractional-order Chua's circuit

Zhang Hao, Chen Di-Yi, Zhou Kun, Wang Yi-Chen
Chin. Phys. B, 2015, 24 (3): 030203 doi: 10.1088/1674-1056/24/3/030203
Full Text: [PDF 993 KB] (Downloads:337) RICH HTML
Show Abstract
The ultimate proof of our understanding of nature and engineering systems is reflected in our ability to control them. Since fractional calculus is more universal, we bring attention to the controllability of fractional order systems. First, we extend the conventional controllability theorem to the fractional domain. Strictly mathematical analysis and proof are presented. Because Chua's circuit is a typical representative of nonlinear circuits, we study the controllability of the fractional order Chua's circuit in detail using the presented theorem. Numerical simulations and theoretical analysis are both presented, which are in agreement with each other.

Hybrid natural element method for large deformation elastoplasticity problems

Ma Yong-Qi, Zhou Yan-Kai
Chin. Phys. B, 2015, 24 (3): 030204 doi: 10.1088/1674-1056/24/3/030204
Full Text: [PDF 453 KB] (Downloads:468) RICH HTML
Show Abstract

We present the hybrid natural element method (HNEM) for two-dimensional elastoplastic large deformation problems. Sibson interpolation is adopted to construct the shape functions of nodal incremental displacements and incremental stresses. The incremental form of Hellinger-Reissner variational principle for elastoplastic large deformation problems is deduced to obtain the equation system. The total Lagrangian formulation is used to describe the discrete equation system. Compared with the natural element method (NEM), the HNEM has higher computational precision and efficiency in solving elastoplastic large deformation problems. Some numerical examples are selected to demonstrate the advantage of the HNEM for large deformation elastoplasticity problems.

Inverse problem of pulsed eddy current field of ferromagnetic plates

Chen Xing-Le, Lei Yin-Zhao
Chin. Phys. B, 2015, 24 (3): 030301 doi: 10.1088/1674-1056/24/3/030301
Full Text: [PDF 403 KB] (Downloads:367) RICH HTML
Show Abstract
To determine the wall thickness, conductivity and permeability of a ferromagnetic plate, an inverse problem is established with measured values and calculated values of time-domain induced voltage in pulsed eddy current testing on the plate. From time-domain analytical expressions of the partial derivatives of induced voltage with respect to parameters, it is deduced that the partial derivatives are approximately linearly dependent. Then the constraints of these parameters are obtained by solving a partial linear differential equation. It is indicated that only the product of conductivity and wall thickness, and the product of relative permeability and wall thickness can be determined accurately through the inverse problem with time-domain induced voltage. In the practical testing, supposing the conductivity of the ferromagnetic plate under test is a fixed value, and then the relative variation of wall thickness between two testing points can be calculated via the ratio of the corresponding inversion results of the product of conductivity and wall thickness. Finally, this method for wall thickness measurement is verified by the experiment results of a carbon steel plate.

Approximate analytical solution of the Dirac equation with q-deformed hyperbolic Pöschl-Teller potential and trigonometric Scarf Ⅱ non-central potential

Ade Kurniawan, A. Suparmi, C. Cari
Chin. Phys. B, 2015, 24 (3): 030302 doi: 10.1088/1674-1056/24/3/030302
Full Text: [PDF 414 KB] (Downloads:405) RICH HTML
Show Abstract
An approximate solution of the Dirac equation for a spin-1/2 particle under the influence of q-deformed hyperbolic Pöschl-Teller potential combined with trigonometric Scarf Ⅱ non-central potential is studied analytically. It is assumed that the scalar potential equals the vector potential in order to obtain analytical solutions. Both radial and angular parts of the Dirac equation are solved using the Nikiforov-Uvarov method. A relativistic energy spectrum and the relation between quantum numbers can be obtained using this method. Several quantum wave functions corresponding to several states are also presented in terms of the Jacobi Polynomials.

Spin transport properties of a Dresselhaus-polygonal quantum ring

Tang Han-Zhao, Zhai Li-Xue, Shen Man, Liu Jian-Jun
Chin. Phys. B, 2015, 24 (3): 030303 doi: 10.1088/1674-1056/24/3/030303
Full Text: [PDF 473 KB] (Downloads:356) RICH HTML
Show Abstract

We propose a theoretical method to investigate the effect of the Dresselhaus spin-orbit coupling (DSOC) on the spin transport properties of a regular polygonal quantum ring with an arbitrary number of segments. We find that the DSOC can break the time reversal symmetry of the spin conductance in a polygonal ring and that this property can be used to reverse the spin direction of electrons in the polygon with the result that a pure spin up or pure spin down conductance can be obtained by exchanging the source and the drain. When the DSOC is considered in a polygonal ring with Rashba spin-orbit coupling (RSOC) with symmetric attachment of the leads, the total conductance is independent of the number of segments when both of the two types of spin-orbit coupling (SOC) have the same value. However, the interaction of the two types of SOC results in an anisotropic and shape-dependent conductance in a polygonal ring with asymmetric attachment of the leads. The method we proposed to solve for the spin conductance of a polygon can be generalized to the circular model.

Measurement-induced nonlocality in the W and Greenberger-Horne-Zeilinger superposition states

Lin Qin, Bai Yan-Kui, Ye Ming-Yong, Lin Xiu-Min
Chin. Phys. B, 2015, 24 (3): 030304 doi: 10.1088/1674-1056/24/3/030304
Full Text: [PDF 434 KB] (Downloads:601) RICH HTML
Show Abstract

Measurement-induced nonlocality (MIN) is a newly defined quantity to measure correlations in bipartite quantum states [Luo S and Fu S 2011 Phys. Rev. Lett. 106 120401]. MIN in the n-qubit W and Greenberger-Horne-Zeilinger (GHZ) superposition states is considered. It is revealed that n=3 and n≥ 4 states have very different characteristics, especially the monogamy relation about MIN, and the monogamy equality of MIN is held in all n-qubit W states (n≥ 3).

Topological phase transitions driven by next-nearest-neighbor hopping in noncentrosymmetric cold Fermi gases

Wang Rui, Zhang Cun-Xi, Ji Qing-Shan
Chin. Phys. B, 2015, 24 (3): 030305 doi: 10.1088/1674-1056/24/3/030305
Full Text: [PDF 1128 KB] (Downloads:442) RICH HTML
Show Abstract

We investigate the topological phase marked by the Thouless-Kohmoto-Nightingale-Nijs (TKNN) number and the phase transitions driven by the next nearest neighbor (NNN) hopping in noncentrosymmetric cold Fermi gases, both spin-singlet pairing and spin-triplet pairing are considered. There exists a critical t'c for the NNN hopping, at which the quantum phase transition occurs, and the system changes from an Abelian (non-Abelian) phase to a non-Abelian (Abelian) one. By numerically diagonalizing the Hamiltonian in the real space, the energy spectra with edge states for different topological phases and the Majorana zero modes are discussed. Although the spin-triplet pairing does not contribute to the gap closing and the phase diagram, it induces gapless states in the presence of a magnetic field, and the TKNN number in this region is still zero.

Influence of the environmental noise on determining the period of a torsion pendulum

Luo Jie, Tian Yuan, Shao Cheng-Gang, Wang Dian-Hong
Chin. Phys. B, 2015, 24 (3): 030401 doi: 10.1088/1674-1056/24/3/030401
Full Text: [PDF 327 KB] (Downloads:342) RICH HTML
Show Abstract

The environmental noise can restrict the accuracy of period estimation since the torsion pendulum is sensitive to weak forces. Two typical models for the environmental noise are proposed to make an evaluation. Generally, the stationary environmental noise is modeled as a white noise, and contributes to the period uncertainty as a function of the initial amplitude, the quality factor, the variance of noise and the time length. As to a sudden sharp disturbance acting on the pendulum, a narrow impulse model is constructed. It results in a sharp jump in the phase difference, which can be excluded with the 3σ criterion for a correction. An experimental data analysis for the measurement of the gravitational constant G with the time-of-swing method shows that the period uncertainty due to the environmental noise is about one and a half times the fundamental thermal noise limit. Though this result is dependent on the ambient environment, the analysis is instructive to improve the measurement accuracy of experiments.

Bifurcation behavior and coexisting motions in a time-delayed power system

Ma Mei-Ling, Min Fu-Hong
Chin. Phys. B, 2015, 24 (3): 030501 doi: 10.1088/1674-1056/24/3/030501
Full Text: [PDF 1946 KB] (Downloads:585) RICH HTML
Show Abstract
With the increase of system scale, time delays have become unavoidable in nonlinear power systems, which add the complexity of system dynamics and induce chaotic oscillation and even voltage collapse events. In this paper, coexisting phenomenon in a fourth-order time-delayed power system is investigated for the first time with different initial conditions. With the mechanical power, generator damping factor, exciter gain, and time delay varying, the specific characteristic of the time-delayed system, including a discontinuous “jump” bifurcation behavior is analyzed by bifurcation diagrams, phase portraits, Poincaré maps, and power spectrums. Moreover, the coexistence of two different periodic orbits and chaotic attractors with periodic orbits are observed in the power system, respectively. The production condition and existent domain of the coexistence phenomenon are helpful to avoid undesirable behavior in time-delayed power systems.

Policy iteration optimal tracking control for chaotic systems by using an adaptive dynamic programming approach

Wei Qing-Lai, Liu De-Rong, Xu Yan-Cai
Chin. Phys. B, 2015, 24 (3): 030502 doi: 10.1088/1674-1056/24/3/030502
Full Text: [PDF 1516 KB] (Downloads:356) RICH HTML
Show Abstract
A policy iteration algorithm of adaptive dynamic programming (ADP) is developed to solve the optimal tracking control for a class of discrete-time chaotic systems. By system transformations, the optimal tracking problem is transformed into an optimal regulation one. The policy iteration algorithm for discrete-time chaotic systems is first described. Then, the convergence and admissibility properties of the developed policy iteration algorithm are presented, which show that the transformed chaotic system can be stabilized under an arbitrary iterative control law and the iterative performance index function simultaneously converges to the optimum. By implementing the policy iteration algorithm via neural networks, the developed optimal tracking control scheme for chaotic systems is verified by a simulation.

Observer of a class of chaotic systems: An application to Hindmarsh-Rose neuronal model

Luo Run-Zi, Zhang Chun-Hua
Chin. Phys. B, 2015, 24 (3): 030503 doi: 10.1088/1674-1056/24/3/030503
Full Text: [PDF 368 KB] (Downloads:323) RICH HTML
Show Abstract
This paper first investigates the observer of a class of chaotic systems, and then discusses the synchronization between two identical Hindmarsh-Rose (HR) neuronal chaotic systems. Both the drive and response systems are assumed to have only one state variable available. By constructing proper observers, some novel criteria for synchronization are proposed via a scalar input. Numerical simulations are given to demonstrate the efficiency of the proposed approach.

Robust sliding mode control for fractional-order chaotic economical system with parameter uncertainty and external disturbance

Zhou Ke, Wang Zhi-Hui, Gao Li-Ke, Sun Yue, Ma Tie-Dong
Chin. Phys. B, 2015, 24 (3): 030504 doi: 10.1088/1674-1056/24/3/030504
Full Text: [PDF 331 KB] (Downloads:449) RICH HTML
Show Abstract
This paper presents a modified sliding mode control for fractional-order chaotic economical systems with parameter uncertainty and external disturbance. By constructing the suitable sliding mode surface with fractional-order integral, the effective sliding mode controller is designed to realize the asymptotical stability of fractional-order chaotic economical systems. Comparing with the existing results, the main results in this paper are more practical and rigorous. Simulation results show the effectiveness and feasibility of the proposed sliding mode control method.

Infrared transparent frequency selective surface based on iterative metallic meshes

Yu Miao, Xu Nian-Xi, Gao Jin-Song
Chin. Phys. B, 2015, 24 (3): 030701 doi: 10.1088/1674-1056/24/3/030701
Full Text: [PDF 278 KB] (Downloads:397) RICH HTML
Show Abstract
In this paper, we present an infrared transparent frequency selective surface (ITFSS) based on iterative metallic meshes, which possesses the properties of high transmittance in infrared band and band-pass effect in millimeter wave band. Cross-slot units are designed on the iterative metallic meshes, which is composed of two same square metallic meshes with a misplaced overlap. In the infrared band of 3-5 μm, the ITFSS has an average transmittance of 80% with a MgF2 substrate. In the millimeter wave band, a transmittance of -0.74 dB at the resonance frequency of 39.4 GHz is obtained. Moreover, theoretical simulations of the ITFSS diffractive characteristics and transmittance response are also investigated in detail. This ITFSS may be an efficient way to achieve the metamaterial millimeter wave/infrared functional film.

Enhancement of third harmonic generation in air filamentation using obstacles

Liu Xiao-Long, Lu Xin, Du Zhi-Gui, Ma Jing-Long, Li Yu-Tong, Zhang Jie
Chin. Phys. B, 2015, 24 (3): 034207 doi: 10.1088/1674-1056/24/3/034207
Full Text: [PDF 383 KB] (Downloads:382) RICH HTML
Show Abstract

The intensity of third harmonic emission in air filamentation disturbed by copper fibers and alcohol droplets has been investigated experimentally. Enhancement of the third harmonic emission up to more than one order of magnitude has been observed. The physical mechanism of third harmonic enhancement is attributed to suppression of the destructive interference by comparison of the experimental results and it is closely related to the type, size, and relative position of the obstacles.

Low field induced giant anisotropic magnetocaloric effect in DyFeO3 single crystal

Ke Ya-Jiao, Zhang Xiang-Qun, Ge Heng, Ma Yue, Cheng Zhao-Hua
Chin. Phys. B, 2015, 24 (3): 037501 doi: 10.1088/1674-1056/24/3/037501
Full Text: [PDF 522 KB] (Downloads:475) RICH HTML
Show Abstract

We have investigated the anisotropic magnetocaloric effect and the rotating field magnetic entropy in DyFeO3 single crystal. A giant rotating field entropy change of -ΔSMR=16.62 J/kg·K was achieved from b axis to c axis in bc plane at 5 K for a low field change of 20 kOe. The large anisotropic magnetic entropy change is mainly accounted for the 4f electron of rare-earth Dy3+ ion. The large value of rotating field entropy change, together with large refrigeration capacity and negligible hysteresis, suggests that the multiferroic ferrite DyFeO3 singlecrystal could be a potential material for anisotropic magnetic refrigeration at low field, which can be realized in the practical application around liquid helium temperature region.

New layered metal oxides as positive electrode materials for room-temperature sodium-ion batteries Hot!

Mu Lin-Qin, Hu Yong-Sheng, Chen Li-Quan
Chin. Phys. B, 2015, 24 (3): 038202 doi: 10.1088/1674-1056/24/3/038202
Full Text: [PDF 968 KB] (Downloads:467) RICH HTML
Show Abstract

In order to achieve better Na storage performance, most layered oxide positive electrode materials contain toxic and expensive transition metals Ni and/or Co, which are also widely used for lithium-ion batteries. Here we report a new quaternary layered oxide consisting of Cu, Fe, Mn, and Ti transition metals with O3-type oxygen stacking as a positive electrode for room-temperature sodium-ion batteries. The material can be simply prepared by a high-temperature solidstate reaction route and delivers a reversible capacity of 94 mAh/g with an average storage voltage of 3.2 V. This paves the way for cheaper and non-toxic batteries with high Na storage performance.


Precision calculation of fine structure in helium and Li+

Zhang Pei-Pei, Zhong Zhen-Xiang, Yan Zong-Chao, Shi Ting-Yun
Chin. Phys. B, 2015, 24 (3): 033101 doi: 10.1088/1674-1056/24/3/033101
Full Text: [PDF 271 KB] (Downloads:351) RICH HTML
Show Abstract

The fine structure constant α can be extracted from high-precision spectroscopy of the 23PJ fine structure splittings in helium and light helium-like ions. In this work, the 23PJ fine structure splittings of helium and Li+ ion are calculated, including relativistic and QED corrections of order mα4, mα4(m/M), mα5, mα5(m/M), and Douglas-Kroll operators of mα6 and mα6(m/M), which provide an independent verification for the previous calculations performed by Drake [Can. J. Phys. 80 1195 (2002)] and by Pachucki and Yerokhin [Phys. Rev. A 79 062516 (2009); Phys. Rev. Lett. 104 070403 (2010); Can. J. Phys. 89 1139 (2011)]. The results of the three groups agree with each other.

Compton profile of molecular hydrogen

Zhao Xiao-Li, Yang Ke, Xu Long-Quan, Ma Yong-Peng, Yan Shuai, Ni Dong-Dong, Kang Xu, Liu Ya-Wei, Zhu Lin-Fan
Chin. Phys. B, 2015, 24 (3): 033301 doi: 10.1088/1674-1056/24/3/033301
Full Text: [PDF 298 KB] (Downloads:329) RICH HTML
Show Abstract

The Compton profile of molecular hydrogen has been determined at an incident photon energy of 20 keV based on the third generation synchrotron radiation, and the statistical accuracy of 0.2% is achieved at pz=0. Different theoretical methods, i.e., the density functional method, and the Hartree-Fock method, were used to calculate the Compton profiles of hydrogen with different basis sets, and the theoretical calculations are in agreement with the experimental observation in the whole pz region. Compared with the HF calculation, the DFT-B3LYP ones are in better agreement with the present experiment, which indicates the electron correlation effect is very important to describe the wavefunction in the ground state of hydrogen.

Ellipticity-dependent ionization/dissociation of carbon dioxide in strong laser fields

Zhang Jun-Feng, Ma Ri, Zuo Wan-Long, Lv Hang, Huang Hong-Wei, Xu Hai-Feng, Jin Ming-Xing, Ding Da-Jun
Chin. Phys. B, 2015, 24 (3): 033302 doi: 10.1088/1674-1056/24/3/033302
Full Text: [PDF 339 KB] (Downloads:474) RICH HTML
Show Abstract

Ionization and dissociation of linear triatomic molecules, carbon dioxide, are studied in 50-fs 800-nm strong laser fields using time-of-flight mass spectrometer. The yields of double charged ions CO22+ and various fragment ions (CO+, On+, and Cn+ (n=1, 2)) are measured as a function of ellipticity of laser polarization in the intensity range from 5.0× 1013 W/cm2 to 6.0× 1014 W/cm2. The results demonstrate that non-sequential double ionization, which is induced by laser-driven electron recollision, dominates double ionization of CO2 in the strong IR laser field with intensity lower than 2.0×1014 W/cm2. The electron recollision could also have contribution in strong-field multiple ionization and formation of fragments of CO2 molecules. The present study indicates that the intensity and ellipticity dependence of ions yields can be used to probe the complex dynamics of strong-field ionization/dissociation of polyatomic molecules.

Projectile angular-differential cross sections for single electron transfer in fast He+-He collisions

Ebrahim Ghanbari-Adivi, Hoda Ghavaminia
Chin. Phys. B, 2015, 24 (3): 033401 doi: 10.1088/1674-1056/24/3/033401
Full Text: [PDF 538 KB] (Downloads:289) RICH HTML
Show Abstract
The four-body Coulomb-Born distorted wave approximation is applied to investigate the integral as well as projectile angular-differential cross sections for single-electron capture in the collision of energetic singly positive charged helium ions with helium atoms in their ground states. The formalism satisfies the correct boundary conditions. The influence of the dynamic electron correlations on the cross sections is studied by considering the inter electronic interactions in the complete perturbation potentials in post form. Also, the sensitivity of the cross sections to the static electronic correlations is studied by using the single-zeta and the highly correlated Byron-Joachain wave functions to describe the initial bound state of the active electrons. The obtained results for the energy range of 40-5000 keV/amu are reported and compared with other three- and four-body theoretical data and available experimental measurements. The comparison leads us to discuss the validity of the applied approach and survey the interaction effects on the cross sections by recognizing the electron- electron interaction. Particularly, for differential cross sections, the comparison of the present four-body method with the experiment shows that the agreement is not as good as that for its three-body version.

Formation of hydrogen atom in 2s state in proton-sodium inelastic scattering

Sabbah A. Elkilany
Chin. Phys. B, 2015, 24 (3): 033402 doi: 10.1088/1674-1056/24/3/033402
Full Text: [PDF 220 KB] (Downloads:304) RICH HTML
Show Abstract
The inelastic collision of protons with sodium atoms are treated for the first time within the framework of the coupled-static and frozen core approximations. The method is used for calculating partial and total cross-sections with the assumption that only two channels (elastic and hydrogen formation in 2s state) are open. In each case, the calculations are carried out for seven values of the total angular momentum l (0 ≤ l ≤ 6). The target is described using the Clementi Roetti wave functions within the framework of the one valence electron model. We use Lipmann-Swinger equation to solve the derived equations of the problem, then apply an iterative numerical method to obtain the code of computer to calculate iterative partial cross-sections. This can be done through calculating the reactance matrix at different values of considered energies to obtain the transition matrix that gives partial and total cross sections. The present results for total hydrogen (2s state) formation cross sections are in agreement with results of other available ones in wide range of incident energy.

Fast-electron-impact ionization process by 3p of hydrogen-like ions in Debye plasmas

Qi Yue-Ying, Ye Dan-Dan, Wang Jian-Guo, Qu Yi-Zhi
Chin. Phys. B, 2015, 24 (3): 033403 doi: 10.1088/1674-1056/24/3/033403
Full Text: [PDF 2490 KB] (Downloads:631) RICH HTML
Show Abstract
The plasma screening of fast-electron-impact-ionization by excited state (3p) of Hydrogen-like ions was investigated in the first Born approximation with a plasma screening length δ varying from 1000a0 to 10a0. The generalized oscillator strength densities showed dramatic changes: some accessional minima occurred along with a remarkable enhancement in certain continuum-energy domains. The double-differential cross sections exhibit not only the same structures as the Bethe surface for moderate and large momentum transfers, but also a broadened enhancement for small momentum transfers. The single-differential cross sections exhibit a near-zero-energy-enhancement and prodigious multiple-shape resonances, depending on the continuum energy and the plasma screening length. These features are analogous to those of the photo-ionization cross section. These findings, for both types of cross section, can be explained by processes associated with continuum electrons, as long as the potential has a short-range character.

Morphology and structural stability of Pt-Pd bimetallic nanoparticles

Liu Tun-Dong, Zheng Ji-Wen, Shao Gui-Fang, Fan Tian-E, Wen Yu-Hua
Chin. Phys. B, 2015, 24 (3): 033601 doi: 10.1088/1674-1056/24/3/033601
Full Text: [PDF 1106 KB] (Downloads:540) RICH HTML
Show Abstract

The morphologies and structures of Pt-Pd bimetallic nanoparticles determine their chemical and physical properties. Therefore, a fundamental understanding of their morphologies and structural stabilities is of crucial importance to their applications. In this article, we have performed Monte Carlo simulations to systematically explore the structural stability and structural features of Pt-Pd alloy nanoparticles. Different Pt/Pd ratios, and particle sizes and shapes were considered. The simulated results reveal that the truncated octahedron, which has the remarkably lowest energy among all the considered shapes, exhibits the best structural stability while the tetrahedron has the worst invariably. Furthermore, all the structures of Pt-Pd alloy nanoparticles present Pd-rich in the outmost layer but Pt-rich in the sub-outmost layer. Especially, atomic distribution and chemical short-range order parameter were applied to further characterize the structural features of Pt-Pd alloy nanoparticles. This study provides a significant insight not only into the structural stability of Pt-Pd alloy nanoparticles with different compositions, and particle sizes and shapes but also to the design of bimetallic nanoparticles.

Implementation of ternary Shor's algorithm based on vibrational states of an ion in anharmonic potential

Liu Wei, Chen Shu-Ming, Zhang Jian, Wu Chun-Wang, Wu Wei, Chen Ping-Xing
Chin. Phys. B, 2015, 24 (3): 033701 doi: 10.1088/1674-1056/24/3/033701
Full Text: [PDF 603 KB] (Downloads:392) RICH HTML
Show Abstract
It is widely believed that Shor's factoring algorithm provides a driving force to boost the quantum computing research. However, a serious obstacle to its binary implementation is the large number of quantum gates. Non-binary quantum computing is an efficient way to reduce the required number of elemental gates. Here, we propose optimization schemes for Shor's algorithm implementation and take a ternary version for factorizing 21 as an example. The optimized factorization is achieved by a two-qutrit quantum circuit, which consists of only two single qutrit gates and one ternary controlled-NOT gate. This two-qutrit quantum circuit is then encoded into the nine lower vibrational states of an ion trapped in a weakly anharmonic potential. Optimal control theory (OCT) is employed to derive the manipulation electric field for transferring the encoded states. The ternary Shor's algorithm can be implemented in one single step. Numerical simulation results show that the accuracy of the state transformations is about 0.9919.

Drift effect on vacuum birefringence in a strong electric and magnetic field

Huang Yong-Sheng, Wang Nai-Yan, Tang Xiu-Zhang
Chin. Phys. B, 2015, 24 (3): 034201 doi: 10.1088/1674-1056/24/3/034201
Full Text: [PDF 235 KB] (Downloads:261) RICH HTML
Show Abstract

As an important QED effect to detect the vacuum polarization, birefringence in the presence of a strong electric and magnetic field, E0B0,E0cB0, is considered. The directional dependence of birefringence is obtained. In two special cases: E0 = 0 and E0 = cB0, our results are consistent with the previous ones. The refractive index of the probe wave propagating in the E0×B0 direction decreases with E0/cB0, while that in the -E0×B0 direction increases with E0/cB0. The physics of the direction dependence of birefringence maybe the E0×B0 drift velocity of the virtual electrons and positrons.

Spontaneous emission of “polarized” V-type three-level atoms strongly coupled with an optical cavity

Xue Yan-Li, Zhu Shi-Deng, Li Jia-Fang, Ding Wei, Feng Bao-Hua, Li Zhi-Yuan
Chin. Phys. B, 2015, 24 (3): 034202 doi: 10.1088/1674-1056/24/3/034202
Full Text: [PDF 313 KB] (Downloads:290) RICH HTML
Show Abstract
Polarization, an intrinsic ingredient of photon, plays a critical role in its interaction with matter. A general polarization state can be an appropriate superposition of two basic polarization states, say, the vertical and horizontal linear polarized state. Here we study spontaneous emission of a V-type three-level atom (with two upper states close in energy level) strongly coupled with a single-mode damped optical cavity. By defining a general polarization state of atom as a specific superposition of the two upper quantum states, we can prepare atoms with linear polarization at arbitrary direction, left and right circular polarization, and left and right elliptical polarization, similar to photons. We find that the spontaneous emission of light from these “polarized” three-level atoms shows very different profiles of side and axis spectra. This means that the polarization state of three-level atoms can become an active ingredient to manipulate its interaction with light and control the quantum interference effect. Exploitation of the coherent superposition and interference of quantum states in “polarized” atoms would allow one to deeply explore new frontiers of light-matter interaction.

Preparation of SiO2@Au nanorod array as novel surface enhanced Raman substrate for trace pollutants detection

Hou Meng-Jing, Zhang Xian, Cui Xiao-Yang, Liu Can, Li Zheng-Cao, Zhang Zheng-Jun
Chin. Phys. B, 2015, 24 (3): 034203 doi: 10.1088/1674-1056/24/3/034203
Full Text: [PDF 1148 KB] (Downloads:358) RICH HTML
Show Abstract
An effective surface enhanced Raman scattering (SERS) substrate is designed and fabricated by synthesis of SiO2 nanorods array via glancing angle deposition, followed by coating Au nanoparticles onto SiO2 surface in order to create numerous “hot spots”. The detecting sensitivity of such substrate could be optimized by simply adjusting the deposition time of Au. Thus, it can be used for detection of Rhodamine 6G at concentration as low as 10-9 M. Furthermore, our SERS substrate is applied to detect 5 μg/g polychlorinated biphenyls in soil sample, which proves its potential for trace environmental pollutants detection.

Sensitive absorption measurements of hydrogen sulfide at 1.578 μm using wavelength modulation spectroscopy

Xia Hua, Dong Feng-Zhong, Wu Bian, Zhang Zhi-Rong, Pang Tao, Sun Peng-Shuai, Cui Xiao-Juan, Han Luo, Wang Yu
Chin. Phys. B, 2015, 24 (3): 034204 doi: 10.1088/1674-1056/24/3/034204
Full Text: [PDF 1679 KB] (Downloads:1003) RICH HTML
Show Abstract
Sensitive detection of hydrogen sulfide (H2S) has been performed by means of wavelength modulation spectroscopy (WMS) near 1.578 μm. With the scan amplitude and the stability of the background baseline taken into account, the response time is 4 s for a 0.8 L multi-pass cell with a 56.7 m effective optical path length. Moreover, the linearity has been tested in the 0-50 ppmv range. The detection limit achievable by the Allan variance is 224 ppb within 24 s under room temperature and ambient pressure conditions. This tunable diode laser absorption spectroscopy (TDLAS) system for H2S detection has the feasibility of real-time online monitoring in many applications.

First-principles study on linear and nonlinear optical properties of ZnGeP2

Xiao Rui-Chun, Wu Hai-Xin, Ni You-Bao, Wang Zhen-You, Huang Chang-Bao, Cheng Xu-Dong
Chin. Phys. B, 2015, 24 (3): 034205 doi: 10.1088/1674-1056/24/3/034205
Full Text: [PDF 249 KB] (Downloads:339) RICH HTML
Show Abstract

The study of the linear and nonlinear optical properties of ZnGeP2 based on density functional theory has been carried out. In order to get a more physical picture in the infrared region, terms which are considered as the phonon effect were added to the calculated refractive dispersion curves. The phonon-corrected calculation curves show excellent agreement with experimental refractive indexes, which gives a better comprehension of the linear optical proprieties in the transparent region. The static nonlinear optical susceptibility was investigated using approaches based on the “sum over states” and the 2n+1 theorem methods. Both of the results of these two methods reasonably coincided with the experimental results.

Attosecond pulse generation from two-electron harmonic emission spectrum

Feng Li-Qiang, Liu Hang
Chin. Phys. B, 2015, 24 (3): 034206 doi: 10.1088/1674-1056/24/3/034206
Full Text: [PDF 1746 KB] (Downloads:335) RICH HTML
Show Abstract

In this paper, we theoretically investigate the high-order harmonic generation and attosecond pulse generation when a two-electron He atom is exposed to the intense laser pulse. It shows that due to the two-electron double recombination mechanism, an extended plateau beyond the classical single-electron harmonic has been obtained on the two-electron harmonic spectrum. Further by using this two-electron harmonic extension scheme combined with the two-color field, two supercontinuum bandwidths with 200 eV have been obtained. As a result, a series of sub-60 as extreme ultraviolet (XUV) pulses have been directly generated.

Non-Gaussian quantum states generation and robust quantum non-Gaussianity via squeezing field

Tang Xu-Bing, Gao Fang, Wang Yao-Xiong, Kuang Sen, Shuang Feng
Chin. Phys. B, 2015, 24 (3): 034208 doi: 10.1088/1674-1056/24/3/034208
Full Text: [PDF 854 KB] (Downloads:343) RICH HTML
Show Abstract
Recent studies show that quantum non-Gaussian states or using non-Gaussian operations can improve entanglement distillation, quantum swapping, teleportation, and cloning. In this work, employing a strategy of non-Gaussian operations (namely subtracting and adding a single photon), we propose a scheme to generate non-Gaussian quantum states named single-photon-added and -subtracted coherent (SPASC) superposition states by implementing Bell measurements, and then investigate the corresponding nonclassical features. By squeezed the input field, we demonstrate that robustness of non- Gaussianity can be improved. Controllable phase space distribution offers the possibility to approximately generate a displaced coherent superposition states (DCSS). The fidelity can reach up to F≥0.98 and F ≥ 0.90 for size of amplitude z = 1.53 and 2.36, respectively.

Frequency detection of self-adaption control based on chaotic theory

Xu Yan-Chun, Qu Xiao-Dong, Li Zhen-Xing
Chin. Phys. B, 2015, 24 (3): 034301 doi: 10.1088/1674-1056/24/3/034301
Full Text: [PDF 446 KB] (Downloads:297) RICH HTML
Show Abstract
Low-order Duffing and high-order Rössler chaotic oscillator are connected together and new self-adaption frequency detection method is presented. The frequency difference control between unknown signal and the periodic driving force is realized in this paper and the self-adaption is obtained. Thus, the detection precision and speed are promoted. The limitation that there are too many chaotic oscillators in Duffing system is broken. Meanwhile the disadvantage that the detection speed is lower in Rössler chaotic control is overcome. The self-adaption choice of frequency difference control is realized using the Duffing and Rössler different chaotic oscillators to obtain unknown signal frequency. The simulation results show that the presented method is feasible and effective.

Time fractional dual-phase-lag heat conduction equation

Xu Huan-Ying, Jiang Xiao-Yun
Chin. Phys. B, 2015, 24 (3): 034401 doi: 10.1088/1674-1056/24/3/034401
Full Text: [PDF 380 KB] (Downloads:746) RICH HTML
Show Abstract
We build a fractional dual-phase-lag model and the corresponding bioheat transfer equation, which we use to interpret the experiment results for processed meat that have been explained by applying the hyperbolic conduction. Analytical solutions expressed by H-functions are obtained by using the Laplace and Fourier transforms method. The inverse fractional dual-phase-lag heat conduction problem for the simultaneous estimation of two relaxation times and orders of fractionality is solved by applying the nonlinear least-square method. The estimated model parameters are given. Finally, the measured and the calculated temperatures versus time are compared and discussed. Some numerical examples are also given and discussed.

Enhanced thermoelectric performance of TiO2-based hybrid materials by incorporating conducting polymer

Wu Zi-Hua, Xie Hua-Qing, Zhai Yong-Biao, Gan Liang-Hua, Liu Jun
Chin. Phys. B, 2015, 24 (3): 034402 doi: 10.1088/1674-1056/24/3/034402
Full Text: [PDF 1359 KB] (Downloads:492) RICH HTML
Show Abstract
In order to study the thermoelectric properties of TiO2-based hybrid materials, TiO2/polyparaphenylene (PPP) nanocomposites are fabricated by spark plasma sintering (SPS). The results show that the electrical conductivity follow percolation theory is enhanced due to the electron transfer highway provided by the conducting PPP phase. Furthermore, the thermal conductivity is reduced due to the drastic difference of vibrational spectra between organic and inorganic components. As a result, the greatest ZT=0.24 is obtained for TiO2/0.75 wt% PPP sample, which is 15-fold higher than pure TiO2 (ZT=0.016).

High coercivity in large exchange-bias Co/CoO-MgO nano-granular films

Ge Chuan-Nan, Wan Xian-Gang, Eric Pellegrin, Hu Zhi-Wei, Wen-I Liang, Michael Bruns, Zou Wen-Qin, Du You-Wei
Chin. Phys. B, 2015, 24 (3): 034501 doi: 10.1088/1674-1056/24/3/034501
Full Text: [PDF 681 KB] (Downloads:237) RICH HTML
Show Abstract

We present a detailed study on the magnetic coercivity of Co/CoO-MgO core-shell systems, which exhibits a large exchange bias due to an increase of the uncompensated spin density at the interface between the CoO shell and the metallic Co core by replacing Co by Mg within the CoO shell. We find a large magnetic coercivity of 7120 Oe around the electrical percolation threshold of the Co/CoO core/shell particles, while samples with a smaller or larger Co metal volume fraction show a considerably smaller coercivity. Thus, this study may lead to a route to improving the magnetic properties of artificial magnetic material in view of potential applications.

Experimental study and analysis on the rising motion of grains in a vertically-vibrated pipe

Liu Yu, Zhao Jun-Hong
Chin. Phys. B, 2015, 24 (3): 034502 doi: 10.1088/1674-1056/24/3/034502
Full Text: [PDF 229 KB] (Downloads:384) RICH HTML
Show Abstract
Previous experimental investigations have shown that when a narrow pipe is inserted into a granular bed and is vibrated vertically but the granular bed is kept still, the grains in the bed can enter the pipe and rise against gravity along the pipe and finally stabilized at a certain height. The growth velocity and final stable height of the grain column inside the pipe can be controlled by varying the vibration conditions. In this paper, we discuss those experimental findings. We establish a mathematic relation between the grain column height (h) and time (t), and by using the relation we discuss the change of the growth velocity (dh/dt) and acceleration (d2h/dt2) with t and h, respectively. We also analyze the mechanism of the rising motion of the grains during vibration. Furthermore, we derive a theoretical expression for describing the final stable height (dst), which shows that the main factors influencing the height are vibration strength (Γ), bulk density of grains, inner diameter of the pipe, and vibration frequency, and that hst increases nonlinearly in the presence of air and linearly in a vacuum environment with increasing Γ.

Frequency-dependent friction in pipelines

Jiang Dan, Li Song-Jing, Yang Ping, Zhao Tian-Yang
Chin. Phys. B, 2015, 24 (3): 034701 doi: 10.1088/1674-1056/24/3/034701
Full Text: [PDF 363 KB] (Downloads:832) RICH HTML
Show Abstract
A comprehensive study of modeling the frequency-dependent friction in a pipeline during pressure transients following a sudden cut-off of the flow is presented. A new method using genetic algorithms (GAs) for parameter identification of the weighting function coefficients of the frequency-dependent friction model is described. The number of weighting terms required in the friction model is obtained. Comparisons between simulation results and experimental data of transient pressure pulsations close to the valve in horizontal upstream and downstream pipelines are carried out respectively. The validity of the parameter identification method for weighting function coefficients and the calculation method for the number of weighting terms in the friction model is confirmed.

Modeling of nonlinear envelope solitons in strongly coupled dusty plasmas: Instability and collision

S. K. El-Labany, E. F. El-Shamy, W. F. El-Taibany, N. A. Zedan
Chin. Phys. B, 2015, 24 (3): 035201 doi: 10.1088/1674-1056/24/3/035201
Full Text: [PDF 2043 KB] (Downloads:443) RICH HTML
Show Abstract
Modeling of instability and collision of nonlinear dust-acoustic (NDA) envelope solitons in strongly coupled dusty plasmas (SCDPs) is theoretically investigated. The SCDPs consists of strongly correlated negatively variable-charged dust grains and weakly correlated Boltzmann electrons and ions. Using the derivative expansion perturbation technique, a nonlinear Schrödinger-type (NLST) equation for describing the propagation of NDA envelope solitons is derived. Moreover, the extended Poincaré-Lighthill-Kuo (EPLK) method is employed to deduce the analytical phase shifts and the trajectories after the collision of NDA envelope solitons. In detail, the results show that both modulation instability and phase shift after collision of NDA envelope solitons will modify with the increase in the effects of the viscosity, the relaxation time, and the dust charge fluctuation. Crucially, the modeling of dust-acoustic envelope solitons collision, as reported here, is helpful for understanding the propagation of NDA envelope solitons in strongly coupled dusty plasmas.

Start-up phase plasma discharge design of a tokamak via control parameterization method

Guo Shan, Xu Ke, Xu Chao, Ren Zhi-Gang, Xiao Bing-Jia
Chin. Phys. B, 2015, 24 (3): 035202 doi: 10.1088/1674-1056/24/3/035202
Full Text: [PDF 519 KB] (Downloads:457) RICH HTML
Show Abstract
The tokamak start-up is a very important phase during the process to obtain a suitable equalizing plasma, and its governing model can be described as a set of nonlinear ordinary differential equations (ODEs). In this paper, we first estimate the parameters in the original model and set up an accurate model to express how the variables change during the start-up phase, especially how the plasma current changes with respect to time and the loop voltage. Then, we apply the control parameterization method to obtain an approximate optimal parameters selection problem for the loop voltage design to achieve a desired plasma current target. Computational optimal control techniques such as the variational method and the costate method are employed to solve the problem, respectively. Finally, numerical simulations are performed and the results obtained via different methods are compared. Our numerical parameterization method and optimization procedure turn out to be effective.

A tunable magnetically insulated transmission line oscillator Hot!

Fan Yu-Wei, Wang Xiao-Yu, He Liang, Zhong Hui-Huang, Zhang Jian-De
Chin. Phys. B, 2015, 24 (3): 035203 doi: 10.1088/1674-1056/24/3/035203
Full Text: [PDF 457 KB] (Downloads:413) RICH HTML
Show Abstract

A tunable magnetically insulated transmission line oscillator (MILO) is put forward and simulated. When the MILO is driven by a 430 kV, 40.6 kA electron beam, high-power microwave is generated with a peak output power of 3.0 GW and frequency of 1.51 GHz, and the relevant power conversion efficiency is 17.2%. The 3-dB tunable frequency range (the relative output power is above half of the peak output power) is 2.25-0.825 GHz when the outer radius of the slow-wave structure (SWS) vanes ranges from 77 mm to 155 mm, and the 3-dB tuning bandwidth is 92%, which is sufficient for the aim of large-scale tuning and high power output.


Synthesis and performance of Zn-Ni-P thin films

V. Soare, M. Burada, I. Constantin, M. Ghita, V. Constantin, F. Miculescu, A. M. Popescu
Chin. Phys. B, 2015, 24 (3): 036101 doi: 10.1088/1674-1056/24/3/036101
Full Text: [PDF 3920 KB] (Downloads:460) RICH HTML
Show Abstract
The electroplating of Zn-Ni-P thin film alloys from a sulfate bath containing phosphoric and phosphorous acid was investigated. The bath composition and the deposition parameters were optimized through Hull cell experiments, and the optimum experimental conditions were determined (pH = 2, temperature = 298-313 K, zinc sulfate concentration = 30 g· L-1, EDTA concentration = 15 g· L-1, and current density=1.0-2.0 A· dm-2). The SEM analysis of the coating deposited from the optimum bath revealed fine-grained deposits of the alloy in the presence of EDTA. Optical microscopy analysis indicated an electrodeposited thin film with uniform thickness and good adhesion to the steel substrate. The good adherence of the coatings was also demonstrated by the scratch tests that were performed, with a maximum determined value of 25 N for the critical load. Corrosion resistance tests revealed good protection of the steel substrate by the obtained Zn-Ni-P coatings, with values up to 85.89% for samples with Ni contents higher than 76%. The surface analysis of the thin film samples before and after corrosion was performed by X-ray photoelectron spectroscopy (XPS).

Flexural wave band-gaps in phononic metamaterial beam with hybrid shunting circuits

Zhang Hao, Wen Ji-Hong, Chen Sheng-Bing, Wang Gang, Wen Xi-Sen
Chin. Phys. B, 2015, 24 (3): 036201 doi: 10.1088/1674-1056/24/3/036201
Full Text: [PDF 526 KB] (Downloads:438) RICH HTML
Show Abstract
Periodic arrays of hybrid-shunted piezoelectric patches are used to control the band-gaps of phononic metamaterial beams. Passive resistive-inductive (RL) shunting circuits can produce a narrow resonant band-gap (RG), and active negative capacitive (NC) shunting circuits can broaden the Bragg band-gaps (BGs). In this article, active NC shunting circuits and passive resonant RL shunting circuits are connected to the same piezoelectric patches in parallel, which are usually called hybrid shunting circuits, to control the location and the extent of the band-gaps. A super-wide coupled band-gap is generated when the coupling between RG and the BG occurs. The attenuation constant of the infinite periodic structure is predicted by the transfer matrix method, which is compared with the vibration transmittance of a finite periodic structure calculated by the finite element method. Numerical results show that the hybrid-shunting circuits can make the band-gaps wider by appropriately selecting the inductances, negative capacitances, and resistances.

Two-dimensional arsenic monolayer sheet predicted from first-principles

Pu Chun-Ying, Ye Xiao-Tao, Jiang Hua-Long, Zhang Fei-Wu, Lu Zhi-Wen, He Jun-Bao, Zhou Da-Wei
Chin. Phys. B, 2015, 24 (3): 036301 doi: 10.1088/1674-1056/24/3/036301
Full Text: [PDF 684 KB] (Downloads:479) RICH HTML
Show Abstract

Using first-principles calculations, we investigate the two-dimensional arsenic nanosheet isolated from bulk gray arsenic. Its dynamical stability is confirmed by phonon calculations and molecular dynamics analyzing. The arsenic sheet is an indirect band gap semiconductor with a band gap of 2.21 eV in the hybrid HSE06 functional calculations. The valence band maximum (VBM) and the conduction band minimum (CBM) are mainly occupied by the 4p orbitals of arsenic atoms, which is consistent with the partial charge densities of VBM and CBM. The charge density of the VBM G point has the character of a π bond, which originates from p orbitals. Furthermore, tensile and compressive strains are applied in the armchair and zigzag directions, related to the tensile deformations of zigzag and armchair nanotubes, respectively. We find that the ultimate strain in zigzag deformation is 0.13, smaller than 0.18 of armchair deformation. The limit compressive stresses of single-layer arsenic along armchair and zigzag directions are -4.83 GPa and -4.76 GPa with corresponding strains of -0.15 and -0.14, respectively.

Structural phase transitions of tellurium nanoplates under pressure

Li Chao, Arfan Bukhtiar, Shen Xi, Kong Pan-Pan, Wang Wei-Peng, Zhao Hao-Fei, Yao Yuan, Zou Bing-Suo, Li Yan-Chun, Li Xiao-Dong, Liu Jing, Jin Chang-Qing, Yu Ri-Cheng
Chin. Phys. B, 2015, 24 (3): 036401 doi: 10.1088/1674-1056/24/3/036401
Full Text: [PDF 330 KB] (Downloads:322) RICH HTML
Show Abstract

In situ high-pressure angle dispersive x-ray diffraction experiments using synchrotron radiation on Te nanoplates were carried out with a diamond anvil cell at room temperature. The results show that Te-I with a trigonal structure transforms to triclinic Te-Ⅱ at about 4.9 GPa, Te-Ⅱ transforms to monoclinic Te-Ⅲ at about 8.0 GPa, Te-Ⅲ turns to rhombohedral Te-IV at about 23.8 GPa, and Te-IV changes to body centered cubic Te-V at 27.6 GPa. The bulk moduli B0 of Te nanoplates are higher than those of Te bulk materials.

Strain analysis of free-standing strained silicon-on-insulator nanomembrane

Sun Gao-Di, Dong Lin-Xi, Xue Zhong-Ying, Chen Da, Guo Qing-Lei, Mu Zhi-Qiang
Chin. Phys. B, 2015, 24 (3): 036801 doi: 10.1088/1674-1056/24/3/036801
Full Text: [PDF 439 KB] (Downloads:492) RICH HTML
Show Abstract
Based on the ultra-thin strained silicon-on-insulator (sSOI) technology, by creatively using a hydrofluoric acid (HF) vapor corrosion system to dry etch the SiO2 layer, a large area of suspended strained silicon (sSi) nanomembrane with uniform strain distribution is fabricated. The strain state in the implemented nanomembrane is comprehensively analyzed by using an UV-Raman spectrometer with different laser powers. The results show that the inherent strain is preserved while there are artificial Raman shifts induced by the heat effect, which is proportional to the laser power. The suspended sSOI nanomembrane will be an important material for future novel high-performance devices.

Water-assisted highly enhanced crystallographic etching of graphene by iron catalysts Hot!

Xue Lei-Jiang, Yu Fang, Zhou Hai-Qing, Sun Lian-Feng
Chin. Phys. B, 2015, 24 (3): 036802 doi: 10.1088/1674-1056/24/3/036802
Full Text: [PDF 609 KB] (Downloads:581) RICH HTML
Show Abstract

We report the assisted role of water vapor in crystallographic cutting of graphene via iron catalysts in reduced atmosphere. Without water, graphene can be tailored with smooth trenches composed of straight lines with angles of 60° or 120° between two adjacent trenches. After the addition of water, new chacteristics are found: such as almost no iron particles can be detected along the trenches; each trench becomes longer and lots of graphene nanoribbons can be generated. The underlying mechanism is proposed and discussed, which is attributed to stimulating and lengthening of the catalytic activity of iron particles by water vapor.


Dynamic resistive switching in a three-terminal device based on phase separated manganites

Wang Zhi-Qiang, Yan Zhi-Bo, Qin Ming-Hui, Gao Xing-Sen, Liu Jun-Ming
Chin. Phys. B, 2015, 24 (3): 037101 doi: 10.1088/1674-1056/24/3/037101
Full Text: [PDF 448 KB] (Downloads:365) RICH HTML
Show Abstract
A three-terminal device based on electronic phase separated manganites is suggested to produce high performance resistive switching. Our Monte Carlo simulations reveal that the conductive filaments can be formed/annihilated by reshaping the ferromagnetic metal phase domains with two cross-oriented switching voltages. Besides, by controlling the high resistance state (HRS) to a stable state that just after the filament is ruptured, the resistive switching remains stable and reversible, while the switching voltage and the switching time can be greatly reduced.

Electrical bistable devices using composites of zinc sulfide nanoparticles and poly-(N-vinylcarbazole)

Cao Ya-Peng, Hu Yu-Feng, Li Jian-Tao, Ye Hai-Hang, Lü Long-Feng, Ning Yu, Lu Qi-Peng, Tang Ai-Wei, Lou Zhi-Dong, Hou Yan-Bing, Teng Feng
Chin. Phys. B, 2015, 24 (3): 037201 doi: 10.1088/1674-1056/24/3/037201
Full Text: [PDF 557 KB] (Downloads:369) RICH HTML
Show Abstract
N-dodecanethiol capped zinc sulfide (ZnS) nanocrystals were synthesized by the one-pot approach and blended with poly (N-vinylcarbazole) (PVK) to fabricate electrical bistable devices. The corresponding devices did exhibit electrical bistability and negative differential resistance (NDR) effects. A large ON/OFF current ratio of 104 at negative voltages was obtained by applying different amplitudes of sweeping voltage. The observed conductance switching and the negative differential resistance are attributed to the electric-field-induced charge transfer between the nanocrystals and the polymer, and the charge trapping/detrapping in the nanocrystals.

Spin and valley filter in strain engineered silicene

Wang Sa-Ke, Wang Jun
Chin. Phys. B, 2015, 24 (3): 037202 doi: 10.1088/1674-1056/24/3/037202
Full Text: [PDF 643 KB] (Downloads:718) RICH HTML
Show Abstract
The realization of a perfect spin or valley filtering effect in two-dimensional graphene-like materials is one of the fundamental objectives in spintronics and valleytronics. For this purpose, we study spin- and valley-dependent transport in a silicene system with spatially alternative strains. It is found that due to the valley-opposite gauge field induced by the strain, the strained silicene with a superlattice structure exhibits an angle-resolved valley and spin filtering effect when the spin-orbit interaction is considered. When the interaction that breaks the time reversal symmetry is introduced, such as the spin or valley dependent staggered magnetization, the system is shown to be a perfect spin and valley half metal in which only one spin and valley species is allowed to transport. Our findings are helpful to design both spintronic and valleytronic devices based on silicene.

New SOI power device with multi-region high-concentration fixed interface charge and the model of breakdown voltage

Li Qi, Li Hai-Ou, Tang Ning, Zhai Jiang-Hui, Song Shu-Xiang
Chin. Phys. B, 2015, 24 (3): 037203 doi: 10.1088/1674-1056/24/3/037203
Full Text: [PDF 476 KB] (Downloads:625) RICH HTML
Show Abstract
A new SOI power device with multi-region high-concentration fixed charge (MHFC) is reported. The MHFC is formed through implanting Cs or I ion into the buried oxide layer (BOX), by which the high-concentration dynamic electrons and holes are induced at the top and bottom interfaces of BOX. The inversion holes can enhance the vertical electric field and raise the breakdown voltage since the drain bias is mainly generated from the BOX. A model of breakdown voltage is developed, from which the optimal spacing has also been obtained. The numerical results indicate that the breakdown voltage of device proposed is increased by 287% in comparison to that of conventional LDMOS.

Two-dimensional metallic behavior at polar MgO/BaTiO3 (110) interfaces

Du Yan-Ling, Wang Chun-Lei, Li Ji-Chao, Zhang Xin-Hua, Wang Fu-Ning, Liu Jian, Zhu Yuan-Hu, Yin Na, Mei Liang-Mo
Chin. Phys. B, 2015, 24 (3): 037301 doi: 10.1088/1674-1056/24/3/037301
Full Text: [PDF 793 KB] (Downloads:505) RICH HTML
Show Abstract
The first-principles calculations are employed to investigate the electrical properties of polar MgO/BaTiO3 (110) interfaces. Both n-type and p-type polar interfaces show a two-dimensional metallic behavior. For the n-type polar interface, the interface Ti 3d electrons are the origin of the metallic and magnetic properties. Varying the thickness of BaTiO3 may induce an insulator-metal transition, and the critical thickness is 4 unit cells. For the p-type polar interface, holes preferentially occupy the interface O 2py state, resulting in a conducting interface. The unbalance of the spin splitting of the O 2p states in the interface MgO layer leads to a magnetic moment of about 0.25μB per O atom at the interface. These results further demonstrate that other polar interfaces, besides LaAlO3/SrTiO3, can show a two-dimensional metallic behavior. It is helpful to fully understand the role of polar discontinuity on the properties of the interface, which widens the field of polar-nonpolar interfaces.

Majorana fermion realization and relevant transport processes in a triple-quantum dot system

Deng Ming-Xun, Zheng Shi-Han, Yang Mou, Hu Liang-Bin, Wang Rui-Qiang
Chin. Phys. B, 2015, 24 (3): 037302 doi: 10.1088/1674-1056/24/3/037302
Full Text: [PDF 468 KB] (Downloads:544) RICH HTML
Show Abstract

Nonequilibrium electronic transports through a system hosting three quantum dots hybridized with superconductors are investigated. By tuning the relative positions of the dot levels, we illustrate the existence of Majorana fermions and show that the Majorana feimions will either survive separately on single dots or distribute themselves among different dots with tunable probabilities. As a result, different physical mechanisms appear, including local Andreev reflection (LAR), cross Andreev reflection (CAR), and cross resonant tunneling (CRT). The resulting characteristics may be used to reveal the unique properties of Majorana fermions. In addition, we discuss the spin-polarized transports and find a pure spin current and a spin filter effect due to the joint effect of CRT and CAR, which is important for designing spintronic devices.

Influences of fringing capacitance on threshold voltage and subthreshold swing of a GeOI metal-oxide-semiconductor field-effect transistor

Fan Min-Min, Xu Jing-Ping, Liu Lu, Bai Yu-Rong, Huang Yong
Chin. Phys. B, 2015, 24 (3): 037303 doi: 10.1088/1674-1056/24/3/037303
Full Text: [PDF 304 KB] (Downloads:461) RICH HTML
Show Abstract

Models of threshold voltage and subthreshold swing, including the fringing-capacitance effects between the gate electrode and the surface of the source/drain region, are proposed. The validity of the proposed models is confirmed by the good agreement between the simulated results and the experimental data. Based on the models, some factors impacting the threshold voltage and subthreshold swing of a GeOI metal-oxide-semiconductor field-effect transistor (MOSFET) are discussed in detail and it is found that there is an optimum thickness of gate oxide for definite dielectric constant of gate oxide to obtain the minimum subthreshold swing. As a result, it is shown that the fringing-capacitance effect of a short-channel GeOI MOSFET cannot be ignored in calculating the threshold voltage and subthreshold swing.

Improvement of the off-state breakdown voltage with field plate and low-density drain in AlGaN/GaN high-electron mobility transistors

Zhang Peng, Zhao Sheng-Lei, Hou Bin, Wang Chong, Zheng Xue-Feng, Ma Xiao-Hua, Zhang Jin-Cheng, Hao Yue
Chin. Phys. B, 2015, 24 (3): 037304 doi: 10.1088/1674-1056/24/3/037304
Full Text: [PDF 347 KB] (Downloads:440) RICH HTML
Show Abstract

We present an AlGaN/GaN high-electron mobility transistor (HEMT) device with both field plate (FP) and low-density drain (LDD). The LDD is realized by the injection of negatively charged fluorine (F-) ions under low power in the space between the gate and the drain electrodes. With a small-size FP and a LDD length equal to only 31% of the gate-drain spacing, the device effectively modifies the electric field distribution and achieves a breakdown voltage enhancement up to two times when compared with a device with only FP.

Double spin-glass-like behavior and antiferromagnetic superexchange interaction between Fe3+ ions in α-Ga2-xFexO3 (0 ≤ x ≤ 0.4)

Lv Yi-Fei, Xiang Jian-Yong, Wen Fu-Sheng, Lv Wei-Ming, Hu Wen-Tao, Liu Zhong-Yuan
Chin. Phys. B, 2015, 24 (3): 037502 doi: 10.1088/1674-1056/24/3/037502
Full Text: [PDF 1185 KB] (Downloads:674) RICH HTML
Show Abstract

Single phase of Fe3+-doped α-Ga2-xFexO3 (α -GFxO, x=0.1, 0.2, 0.3, 0.4) is synthesized by treating the β -Ga2-xFexO3 (β -GFxO) precursors at high temperatures and high pressures. Rietveld refinements of the X-ray diffraction data show that the lattice constants increase monotonically with the increase of Fe3+ content. Calorimetric measurements show that the temperature of the phase transition from α -GFxO to β -GFxO increases, while the associated enthalpy change decreases upon increasing Fe3+ content. The optical energy gap deduced from the reflectance measurement is found to decrease monotonically with the increase in Fe3+ content. From the measurements of magnetic field-dependent magnetization and temperature-dependent inverse molar susceptibility, we find that the superexchange interaction between Fe3+ ions is antiferromagnetic. Remnant magnetization is observed in the Fe3+-doped α -GFxO and is attributed to the spin glass in the magnetic sublattice. At high Fe3+ doping level (x=0.4), two evident peaks are observed in the image part of the AC susceptibility χ" ac. The frequency dependence in intensity of these two peaks as well as two spin freezing temperatures observed in the DC magnetization measurements of α -GF0.4O is suggested to be the behavior of two spin glasses.

Magnetic properties and magnetocaloric effects in HoPd intermetallic

Mo Zhao-Jun, Shen Jun, Gao Xin-Qiang, Liu Yao, Wu Jian-Feng, Shen Bao-Gen, Sun Ji-Rong
Chin. Phys. B, 2015, 24 (3): 037503 doi: 10.1088/1674-1056/24/3/037503
Full Text: [PDF 358 KB] (Downloads:386) RICH HTML
Show Abstract
A large reversible magnetocaloric effect accompanied by a second order magnetic phase transition from PM to FM is observed in the HoPd compound. Under the magnetic field change of 0-5 T, the magnetic entropy change -ΔSMmax and the refrigerant capacity RC for the compound are evaluated to be 20 J/(kg · K) and 342 J/kg, respectively. In particular, large -ΔSMmax (11.3 J/(kg · K)) and RC (142 J/kg) are achieved under a low magnetic field change of 0-2 T with no thermal hysteresis and magnetic hysteresis loss. The large reversible magnetocaloric effect (both the large -ΔSM and the high RC) indicates that HoPd is a promising material for magnetic refrigeration at low temperature.

Reduction of defect-induced ferromagnetic stability in passivated ZnO nanowires

Wu Fang, Meng Pei-Wen, Luo Kang, Liu Yun-Fei, Kan Er-Jun
Chin. Phys. B, 2015, 24 (3): 037504 doi: 10.1088/1674-1056/24/3/037504
Full Text: [PDF 463 KB] (Downloads:576) RICH HTML
Show Abstract
First-principles calculations are performed to study the electronic structures and magnetic properties of ZnO nanowires (NM). Our results indicate that the single Zn defect can induce large local magnetic moment (~ 2μB) in the ZnO NWs, regardless of the surface modification. Interestingly, we find that local magnetic defects have strong spin interaction, and favor room-temperature ferromagnetism in bared ZnO NW. On the other hand, although H passivation does not destroy the local magnetic moment of Zn vacancy, it does greatly reduce the spin interaction between magnetic defects. Therefore, our results indicate that H passivation should be avoided in the process of experiments to maintain the room-temperature ferromagnetism.

Tailoring the structural and magnetic properties of Cu-doped ZnO by c-axis pressure

Gong Ji-Jun, Chen Ji-Pei, Zhang Fei, Wu Hao, Qin Ming-Hui, Zeng Min, Gao Xing-Sen, Liu Jun-Ming
Chin. Phys. B, 2015, 24 (3): 037505 doi: 10.1088/1674-1056/24/3/037505
Full Text: [PDF 668 KB] (Downloads:415) RICH HTML
Show Abstract
The structural and magnetic properties of the Cu-doped ZnO (ZnO:Cu) under c-axis pressure were studied using first-principle calculations. It was found that the ZnO:Cu undergoes a structural transition from Wurtzite to Graphite-like structure at a c-axis pressure of 7-8 GPa. This is accompanied by an apparent loss of ferromagnetic stability, indicating a magnetic transformation from a ferromagnetic state to a paramagnetic-like state. Further studies revealed that the magnetic instability is closely related to the variation in crystalline field originated from the structural transition, which is in association with the overlapping of spin-charge density between the Cu2+ and adjacent O2-.

Effect of optimized aging processing on properties of the sintered Dy-doped Nd-Fe-B permanent magnet

Wang Xiao-Li, Zhao Li-Na, Ding Kai-Hong, Cui Sheng-Li, Sun Yong-Cong, Li Mu-Sen
Chin. Phys. B, 2015, 24 (3): 037506 doi: 10.1088/1674-1056/24/3/037506
Full Text: [PDF 608 KB] (Downloads:514) RICH HTML
Show Abstract
We investigate the effect of the optimized aging processing on magnetism and mechanical property of the sintered Dy-doped Nd-Fe-B permanent magnet. The experimental results show that the magnetism, especially intrinsic coercivity, of the optimized aged Dy-doped Nd-Fe-B magnet is more excellent than that of the sintered one, but the former's strength and hardness are lower than that of the latter. It was observed that the optimized aged Dy-doped Nd-Fe-B magnet have more uniform grain size, thinner (Nd, Dy)-rich boundary phase. By means of the EBSD technology, the number of larger angle grain boundaries in the optimized aged Dy-doped Nd-Fe-B magnet is more than that of the sintered one. The reasons for the increased intrinsic coercivity and decreased mechanical properties of the optimized aged Dy-doped Nd-Fe-B magnet are also discussed.

Fabrication and magnetocrystalline anisotropy of NiCo(002) films

Fan Wei-Jia, Ma Li, Shi Zhong, Zhou Shi-Ming
Chin. Phys. B, 2015, 24 (3): 037507 doi: 10.1088/1674-1056/24/3/037507
Full Text: [PDF 316 KB] (Downloads:613) RICH HTML
Show Abstract

A series of 30-nm-thick epitaxial NixCo1-x (002) alloy films are fabricated by DC magnetron sputtering. MgO (002) and SrTiO3 (002) single substrates are used for x>0.5 and x<0.5, respectively. The magnetocrystalline anisotropy of NixCo1-x (002) alloy films is studied in the entire composition region for 0≤x≤ 1.0. When x decreases, the cubic magnetic anisotropy constant K1 changes sign from negative to positive at x=0.96 and becomes negative again at x= 0.79. It becomes more negative as x decreases from 0.79 to 0. The uniaxial anisotropy Ku is smaller than the K1 by a factor of two orders.

Current-induced magnetic soliton solutions in a perpendicular ferromagnetic anisotropy nanowire

Li Qiu-Yan, Zhao Fei, He Peng-Bin, Li Zai-Dong
Chin. Phys. B, 2015, 24 (3): 037508 doi: 10.1088/1674-1056/24/3/037508
Full Text: [PDF 342 KB] (Downloads:604) RICH HTML
Show Abstract

Magnon density distribution can be affected by the spin-transfer torque in a perpendicular ferromagnetic anisotropy nanowire. We obtain the analytical expression for the critical current condition. For the cases of below and above the critical value, the magnon density distribution admits bright and dark soliton states, respectively. Moreover, we discuss two-soliton collision properties that are modulated by the current. Each magnetic soliton exhibits no changes in both velocity and width before and after the collision.

Quantitative calculations of polarizations arising from the symmetric and antisymmetric exchange strictions in Tm-doped GdMnO3

Qin Ming-Hui, Lin Lin, Li Lin, Jia Xing-Tao, Liu Jun-Ming
Chin. Phys. B, 2015, 24 (3): 037509 doi: 10.1088/1674-1056/24/3/037509
Full Text: [PDF 854 KB] (Downloads:586) RICH HTML
Show Abstract

The ferroelectric polarization and phase diagram in Tm-doped GdMnO3 are studied by means of Monte Carlo simulation based on the Mochizuki-Furukawa model. Our work well reproduces the low temperature polarization at various substitution levels observed experimentally. It is demonstrated that the Tm-doping can control the multiferroic behaviors through modulating the spin structures, resulting in the flop of the electric polarization. In addition, the polarization in the ab-plane cycloidal spin phase arises from comparable contributions of the symmetric exchange striction and antisymmetric exchange striction, leading to much bigger polarization than that in the bc-plane cycloidal spin phase where only the contribution of the latter striction is available. The phase diagram obtained in our simulation is helpful for clarifying the multiferroic properties in doped manganite systems and other related multiferroics.

Theoretical study of mutual control mechanism between magnetization and polarization in multiferroic materials

Liu Yu, Zhai Liang-Jun, Wang Huai-Yu
Chin. Phys. B, 2015, 24 (3): 037510 doi: 10.1088/1674-1056/24/3/037510
Full Text: [PDF 252 KB] (Downloads:323) RICH HTML
Show Abstract
The mutual control mechanism between magnetization and polarization in multiferroic materials is studied. The system contains a ferromagnetic sublattice and a ferroelectric sublattice. To describe the magneto-electric coupling, we propose a linear coupling Hamiltonian between ferromagnetism and ferroelectricity without microscopic derivation. This coupling enables one to retrieve the hysteresis loops measured experimentally. The thermodynamic properties of the system are calculated, such as the temperature dependences of the magnetization, polarization, internal energy and free energy. The ferromagnetic and ferroelectric hysteresis loops driven by either a magnetic or an electric field are calculated, and the magnetic spin and pseudo-spin are always flipped synchronously under the external magnetic and electric field. Our theoretical results are in agreement with the experiments.

Influence of strain distribution on the morphology evolution of a Ge/GeO2 core/shell nanoparticle confined in ultrathin Al2O3 thinfilm by surface oxidation

Zhang Ying, Huang Hong-Hua, Liu Xiao-Shan, Luo Xing-Fang, Yuan Cai-Lei, Ye Shuang-Li
Chin. Phys. B, 2015, 24 (3): 037701 doi: 10.1088/1674-1056/24/3/037701
Full Text: [PDF 417 KB] (Downloads:629) RICH HTML
Show Abstract
The influence of strain distribution on morphology evolution of Ge/GeO2 core/shell nanoparticle confined in ultrathin Al2O3 thin film by surface oxidation is investigated. A finite-element simulation is performed to simulate the morphology evolution of the confined Ge/GeO2 core/shell nanoparticle under the influence of the local strain distribution. It indicates that the resultant oxidation-related morphology of Ge/GeO2 core/shell nanoparticle confined in ultrathin film is strongly dependent on the local strain distribution. On the other hand, the strain gradients applied on the confined GeO2 shell can be modified by the formation of polycrystalline GeO2 shell, which has potential application in tailoring the microstructure and morphology evolution of the Ge/GeO2 core/shell nanoparticle.

Phase transformation and morphology tuning of β-NaYF4: Yb3+, Er3+ nanocrystals through K+ ions codoping

Liang Zhi-Qin, Zhao Su-Ling, Cui Yue, Tian Li-Jiao, Zhang Jun-Jie, Xu Zheng
Chin. Phys. B, 2015, 24 (3): 037801 doi: 10.1088/1674-1056/24/3/037801
Full Text: [PDF 890 KB] (Downloads:431) RICH HTML
Show Abstract
In this work, a simple method to modulate the crystal phase and morphology with a large amount of K+ ions codoping is proposed. The phase changes to the mixture of β-NaYF4 and β -KYF4 with increasing the content of K+ ions to 80 mol%. When it exceeds 80 mol%, β -NaYF4 disappears gradually and β -KYF4 dominates with a poor crystalline. In addition, the morphology changes from nanosphere to nanoplate, and then to nanoprism, which indicates that a higher content of K+ ions favors the growth rates along [0001] than the [10-10] of the nanocrystals. Additionally, the upconversion (UC) luminescence properties and the ratio of red/green (R/G) UC intensity of samples with different phases and morphologies are detected, which makes it possible to tune the UC fluorescence by varying the concentration of K+ ions.

Improvement of electron injection of organic light-emitting devices by inserting a thin aluminum layer into cesium carbonate injection layer

Xin Li-Wen, Wu Xiao-Ming, Hua Yu-Lin, Xiao Zhi-Hui, Wang Li, Zhang Xin, Yin Shou-Gen
Chin. Phys. B, 2015, 24 (3): 037802 doi: 10.1088/1674-1056/24/3/037802
Full Text: [PDF 256 KB] (Downloads:342) RICH HTML
Show Abstract

We investigate the electron injection effect of inserting a thin aluminum (Al) layer into cesium carbonate (Cs2CO3) injection layer. Two groups of organic light-emitting devices (OLEDs) are fabricated. For the first group of devices based on Alq3, we insert a thin Al layer of different thickness into Cs2CO3 injection layer, and the device's maximum current efficiency of 6.5 cd/A is obtained when the thickness of the thin Al layer is 0.4 nm. However, when the thickness of Al layer is 0.8 nm, the capacity of electron injection is the strongest. To validate the universality of this approach, then we fabricate another group of devices based on another blue emitting material. The maximum current efficiency of the device without and with a thin Al layer is 4.51 cd/A and 4.84 cd/A, respectively. Inserting a thin Al layer of an appropriate thickness into Cs2CO3 layer can result in the reduction of electron injection barrier, enhancement of the electron injection, and improvement of the performance of OLEDs. This can be attributed to the mechanism that thermally evaporated Cs2CO3 decomposes into cesium oxides, the thin Al layer reacts with cesium oxides to form Al-O-Cs complex, and the amount of the Al-O-Cs complex can be controlled by adjusting the thickness of the thin Al layer.

Effect of helium implantation on SiC and graphite

Guo Hong-Yan, Ge Chang-Chun, Xia Min, Guo Li-Ping, Chen Ji-Hong, Yan Qing-Zhi
Chin. Phys. B, 2015, 24 (3): 037803 doi: 10.1088/1674-1056/24/3/037803
Full Text: [PDF 946 KB] (Downloads:710) RICH HTML
Show Abstract
Effects of helium implantation on silicon carbide (SiC) and graphite were studied to reveal the possibility of SiC replacing graphite as plasma facing materials. Pressureless sintered SiC and graphite SMF-800 were implanted with He+ ions of 20 keV and 100 keV at different temperatures and different fluences. The He+ irradiation induced microstructure changes were studied by field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM).

Effects of FeNi-phosphorus-carbon system on crystal growth of diamond under high pressure and high temperature conditions

Hu Mei-Hua, Bi Ning, Li Shang-Sheng, Su Tai-Chao, Zhou Ai-Guo, Hu Qiang, Jia Xiao-Peng, Ma Hong-An
Chin. Phys. B, 2015, 24 (3): 038101 doi: 10.1088/1674-1056/24/3/038101
Full Text: [PDF 505 KB] (Downloads:386) RICH HTML
Show Abstract
This paper reports the crystal growth of diamond from the FeNi-Carbon system with additive phosphorus at high pressures and high temperatures of 5.4-5.8 GPa and 1280-1360℃. Attributed to the presence of additive phosphorus, the pressure and temperature condition, morphology, and color of diamond crystals change obviously. The pressure and temperature condition of diamond growth increases evidently with the increase of additive phosphorus content and results in the moving up of the V-shape region. The surfaces of the diamonds also become coarse as the additive phosphorus added in the growth system. Raman spectra indicate that diamonds grown from the FeNi-phosphorus-carbon system have more crystal defects and impurities. This work provides a new way to enrich the doping of diamond and improve the experimental exploration for future material applications.

Modeling and experiments of N-doped vanadium oxide prepared by a reactive sputtering process

Wang Tao, Yu He, Dong Xiang, Jiang Ya-Dong, Wu Rui-Lin
Chin. Phys. B, 2015, 24 (3): 038102 doi: 10.1088/1674-1056/24/3/038102
Full Text: [PDF 571 KB] (Downloads:549) RICH HTML
Show Abstract

An original numerical model, based on the standard Berg model, is used to simulate the growth mechanism of N-doped VOx deposited with changing oxygen flow in the reactive gas mixture. In order to compare with the numerical model, N-doped VOx films are prepared by reactive magnetron sputtering from a metallic vanadium target immersed in a reactive gas mixture of Ar+O2+N2. Both experimental and numerical results show that the addition of N2 to the process alleviates the hysteresis effect with respect to the oxygen supply. Film compositions obtained from the XPS analysis are compared to the numerical results and the agreement is satisfactory. The results also show that the compound of VN is only found at very low O concentration because of the replacement reaction of VN by O2 atoms with higher oxygen flow rate.

Energy-band alignment of atomic layer deposited (HfO2)x(Al2O3)1-x gate dielectrics on 4H-SiC

Jia Ren-Xu, Dong Lin-Peng, Niu Ying-Xi, Li Cheng-Zhan, Song Qing-Wen, Tang Xiao-Yan, Yang Fei, Zhang Yu-Ming
Chin. Phys. B, 2015, 24 (3): 038103 doi: 10.1088/1674-1056/24/3/038103
Full Text: [PDF 347 KB] (Downloads:376) RICH HTML
Show Abstract

We study a series of (HfO2)x(Al2O3)1-x/4H-SiC MOS capacitors. It is shown that the conduction band offset of HfO2 is 0.5 eV and the conduction band offset of HfAlO is 1.11-1.72 eV. The conduction band offsets of (HfO2)x(Al2O3)1-x are increased with the increase of the Al composition, and the (HfO2)x(Al2O3)1-x offer acceptable barrier heights (> 1 eV) for both electrons and holes. With a higher conduction band offset, (HfO2)x(Al2O3)1-x/4H-SiC MOS capacitors result in a ~ 3 orders of magnitude lower gate leakage current at an effective electric field of 15 MV/cm and roughly the same effective breakdown field of ~ 25 MV/cm compared to HfO2. Considering the tradeoff among the band gap, the band offset, and the dielectric constant, we conclude that the optimum Al2O3 concentration is about 30% for an alternative gate dielectric in 4H-SiC power MOS-based transistors.

Theoretical prediction of energy dependence for D+BrO→DBr+O reaction: The rate constant and product rotational polarization

Zhang Ying-Ying, Xie Ting-Xian, Li Ze-Rui, Shi Ying, Jin Ming-Xing
Chin. Phys. B, 2015, 24 (3): 038201 doi: 10.1088/1674-1056/24/3/038201
Full Text: [PDF 4430 KB] (Downloads:349) RICH HTML
Show Abstract
A quasi-classical trajectory (QCT) calculation is used to investigate the vector and scalar properties of the D+BrO→DBr+O reaction based on an ab initio potential energy surface (X1A' state) with collision energy ranging from 0.1 kcal/mol to 6 kcal/mol. The reaction probability, the cross section, and the rate constant are studied. The probability and the cross section show decreasing behaviors as the collision energy increases. The distribution of the rate constant indicates that the reaction favorably occurs in a relatively low-temperature region (T < 100K). Meanwhile, three product angular distributions P(θr), P(ør), and P(θr,ør) are presented, which reflect the positive effect on the rotational angular momentum j' polarization of the DBr product molecule. In addition, two of the polarization-dependent generalized differential cross sections (PDDCSs), PDDCS00 and PDDCS20, are computed as well. Our results demonstrate that both vector and scalar properties have strong energy dependence.

A novel integrated ultraviolet photodetector based on standard CMOS process

Wang Han, Jin Xiang-Liang, Chen Chang-Ping, Tian Man-Fang, Zhu Ke-Han
Chin. Phys. B, 2015, 24 (3): 038501 doi: 10.1088/1674-1056/24/3/038501
Full Text: [PDF 989 KB] (Downloads:812) RICH HTML
Show Abstract
A novel integrated ultraviolet (UV) photodetector has been proposed, which realizes a high UV selectivity by combining a conventional UV-selective photodiode with an extra infrared (IR) photodiode. The IR photodiode is designed for compensating the photocurrent response of the UV photodiode in the infrared band and is 15 times smaller than the UV one. The integrated photodetector has been fabricated in a 0.35 μm standard CMOS technology. Some critical performance indices of this new structure photodetector, such as spectral responsivity, breakdown voltage, quenching waveform, and transient response, are measured and analyzed. Test results show that the complementary UV-IR photodetector has a maximum spectral responsivity of 0.27 A · W-1 at the wavelength of 400 nm. The device has a high UV selectivity of 3000, which is much higher than that of the single UV photodiode.

High performance silicon waveguide germanium photodetector

Li Chong, Xue Chun-Lai, Li Ya-Ming, Li Chuan-Bo, Cheng Bu-Wen, Wang Qi-Ming
Chin. Phys. B, 2015, 24 (3): 038502 doi: 10.1088/1674-1056/24/3/038502
Full Text: [PDF 316 KB] (Downloads:463) RICH HTML
Show Abstract

High-performance Ge-on-SOI p-i-n waveguide photodetectors with different sizes were fabricated. The performances, in terms of dark-current, photo current responsivity and 3-dB bandwidth, were well studied. A responsivity of 0.842 A/W at 1550 nm and dark current of 70 nA was measured from this detector at -1 V. The detector with a size of 4 μm× 10 μm demonstrated an optical band width of 19 GHz at -5 V for 1550 nm. Both the experimental results and the finite-difference time domain simulation show that, when the device size is above a certain threshold, the absorption is not sensitively dependent on such designing parameters as the width and length of the photodetector.

Performance improvement of GaN-based light-emitting diodes transferred from Si (111) substrate onto electroplating Cu submount with embedded wide p-electrodes

Liu Ming-Gang, Wang Yun-Qian, Yang Yi-Bin, Lin Xiu-Qi, Xiang Peng, Chen Wei-Jie, Han Xiao-Biao, Zang Wen-Jie, Liao Qiang, Lin Jia-Li, Luo Hui, Wu Zhi-Sheng, Liu Yang, Zhang Bai-Jun
Chin. Phys. B, 2015, 24 (3): 038503 doi: 10.1088/1674-1056/24/3/038503
Full Text: [PDF 839 KB] (Downloads:566) RICH HTML
Show Abstract

Crack-free GaN/InGaN multiple quantum wells (MQWs) light-emitting diodes (LEDs) are transferred from Si substrate onto electroplating Cu submount with embedded wide p-electrodes. The vertical-conducting n-side-up configuration of the LED is achieved by using the through-hole structure. The widened embedded p-electrode covers almost the whole transparent conductive layer (TCL), which could not be applied in the conventional p-side-up LEDs due to the electrode-shading effect. Therefore, the widened p-electrode improves the current spreading property and the uniformity of luminescence. The working voltage and series resistance are thereby reduced. The light output of embedded wide p-electrode LEDs on Cu is enhanced by 147% at a driving current of 350 mA, in comparison to conventional LEDs on Si.

Closed-loop control of epileptiform activities in a neural population model using a proportional-derivative controller

Wang Jun-Song, Wang Mei-Li, Li Xiao-Li, Ernst Niebur
Chin. Phys. B, 2015, 24 (3): 038701 doi: 10.1088/1674-1056/24/3/038701
Full Text: [PDF 332 KB] (Downloads:333) RICH HTML
Show Abstract

Epilepsy is believed to be caused by a lack of balance between excitation and inhibitation in the brain. A promising strategy for the control of the disease is closed-loop brain stimulation. How to determine the stimulation control parameters for effective and safe treatment protocols remains, however, an unsolved question. To constrain the complex dynamics of the biological brain, we use a neural population model (NPM). We propose that a proportional-derivative (PD) type closed-loop control can successfully suppress epileptiform activities. First, we determine the stability of root loci, which reveals that the dynamical mechanism underlying epilepsy in the NPM is the loss of homeostatic control caused by the lack of balance between excitation and inhibition. Then, we design a PD type closed-loop controller to stabilize the unstable NPM such that the homeostatic equilibriums are maintained; we show that epileptiform activities are successfully suppressed. A graphical approach is employed to determine the stabilizing region of the PD controller in the parameter space, providing a theoretical guideline for the selection of the PD control parameters. Furthermore, we establish the relationship between the control parameters and the model parameters in the form of stabilizing regions to help understand the mechanism of suppressing epileptiform activities in the NPM. Simulations show that the PD-type closed-loop control strategy can effectively suppress epileptiform activities in the NPM.

Some regularity on how to locate electrodes for higher fECG SNRs

Zhang Jie-Min, Huang Xiao-Lin, Guan Qun, Liu Tie-Bing, Li Ping, Zhao Ying, Liu Hong-Xing
Chin. Phys. B, 2015, 24 (3): 038702 doi: 10.1088/1674-1056/24/3/038702
Full Text: [PDF 1074 KB] (Downloads:806) RICH HTML
Show Abstract
The electrocardiogram (ECG) recorded from the abdominal surface of a pregnant woman is a composite of maternal ECG, fetal ECG (fECG) and other noises, while only the fECG component is always needed by us. With different locations of electrode pairs on the maternal abdominal surface to measure fECGs, the signal-to-noise ratios (SNRs) of the recorded abdominal ECGs are also correspondingly different. Some regularity on how to locate electrodes to obtain higher fECG SNRs is needed practically. In this paper, 343 groups of abdominal ECG records were acquired from 78 pregnant women with different electrode pairs locating, and an appropriate extended research database is formed. Then the regularity on fECG SNRs corresponding to different electrode pairs locating was studied. Based on statistical analysis, it is shown that the fECG SNRs are significantly higher in certain locations than others. Reasonable explanation is also provided to the statistical result using the theories of the fetal cardiac electrical axis and the signal phase delay.

Boron implanted emitter for n-type silicon solar cell

Liang Peng, Han Pei-De, Fan Yu-Jie, Xing Yu-Peng
Chin. Phys. B, 2015, 24 (3): 038801 doi: 10.1088/1674-1056/24/3/038801
Full Text: [PDF 484 KB] (Downloads:385) RICH HTML
Show Abstract

The effects of ion doses on the properties of boron implanted Si for n-type solar cell application were investigated with doses ranging from 5× 1014 cm-2 to 2× 1015 cm-2 and a subsequent two-step annealing process in a tube furnace. With the help of the TCAD process simulation tool, knowledge on diffusion kinetics of dopants and damage evolution was obtained by fitting SIMS measured boron profiles. Due to insufficient elimination of the residual damage, the implanted emitter was found to have a higher saturation current density (J0e) and a poorer crystallographic quality. Consistent with this observation, Voc, Jsc, and the efficiency of the all-implanted p+-n-n+ solar cells followed a decreasing trend with an increase of the implantation dose. The obtained maximum efficiency was 19.59% at a low dose of 5× 1014 cm-2. The main efficiency loss under high doses came not only from increased recombination of carriers in the space charge region revealed by double-diode parameters of dark I-V curves, but also from the degraded minority carrier diffusion length in the emitter and base evidenced by IQE data. These experimental results indicated that clusters and dislocation loops had appeared at high implantation doses, which acted as effective recombination centers for photogenerated carriers.

A new collision avoidance model for pedestrian dynamics

Wang Qian-Ling, Chen Yao, Dong Hai-Rong, Zhou Min, Ning Bin
Chin. Phys. B, 2015, 24 (3): 038901 doi: 10.1088/1674-1056/24/3/038901
Full Text: [PDF 699 KB] (Downloads:1263) RICH HTML
Show Abstract
The pedestrians can only avoid collisions passively under the action of forces during simulations using the social force model, which may lead to unnatural behaviors. This paper proposes an optimization-based model for the avoidance of collisions, where the social repulsive force is removed in favor of a search for the quickest path to destination in the pedestrian's vision field. In this way, the behaviors of pedestrians are governed by changing their desired walking direction and desired speed. By combining the critical factors of pedestrian movement, such as positions of the exit and obstacles and velocities of the neighbors, the choice of desired velocity has been rendered to a discrete optimization problem. Therefore, it is the self-driven force that leads pedestrians to a free path rather than the repulsive force, which means the pedestrians can actively avoid collisions. The new model is verified by comparing with the fundamental diagram and actual data. The simulation results of individual avoidance trajectories and crowd avoidance behaviors demonstrate the reasonability of the proposed model.

A new cellular automaton for signal controlled traffic flow based on driving behaviors

Wang Yang, Chen Yan-Yan
Chin. Phys. B, 2015, 24 (3): 038902 doi: 10.1088/1674-1056/24/3/038902
Full Text: [PDF 440 KB] (Downloads:308) RICH HTML
Show Abstract
The complexity of signal controlled traffic largely stems from the various driving behaviors developed in response to the traffic signal. However, the existing models take a few driving behaviors into account and consequently the traffic dynamics has not been completely explored. Therefore, a new cellular automaton model, which incorporates the driving behaviors typically manifesting during the different stages when the vehicles are moving toward a traffic light, is proposed in this paper. Numerical simulations have demonstrated that the proposed model can produce the spontaneous traffic breakdown and the dissolution of the over-saturated traffic phenomena. Furthermore, the simulation results indicate that the slow-to-start behavior and the inch-forward behavior can foster the traffic breakdown. Particularly, it has been discovered that the over-saturated traffic can be revised to be an under-saturated state when the slow-down behavior is activated after the spontaneous breakdown. Finally, the contributions of the driving behaviors on the traffic breakdown have been examined.

Correlation between the magic wavelengths and the polarization direction of the linearly polarized laser in the Ca+ optical clock Hot!

Liu Pei-Liang, Huang Yao, Bian Wu, Shao Hu, Qian Yuan, Guan Hua, Tang Li-Yan, Gao Ke-Lin
Chin. Phys. B, 2015, 24 (3): 039501 doi: 10.1088/1674-1056/24/3/039501
Full Text: [PDF 256 KB] (Downloads:463) RICH HTML
Show Abstract

The magic wavelengths for different Zeeman components are measured based on the 40Ca+ optical clock. The dynamic dipole polarizability of a non-zero angular moment level has correlation with the polarization direction of the linearly polarized laser beam, and we show that the four hyperfine structure levels of 4s1/2, m = ± 1/2 and 3d5/2, m = ± 1/2 for 40Ca+ have the same dynamic dipole polarizability at the magic wavelength and a certain polarization direction. In addition, the existence of a specific direction of polarization may provide a new idea for improving the precision of magic wavelength measurement in experiment.

Copyright © the Chinese Physical Society
Address: Institute of Physics, Chinese Academy of Sciences, P. O. Box 603,Beijing 100190 China(100190)
Tel: 010-82649026   Fax: 010-82649027   E-Mail:
Supported by Beijing Magtech Co. Ltd. Tel: 86-010-62662699 E-mail: