%A Wang Zhen-Po (王震坡), Liu Peng (刘鹏), Wang Li-Fang (王丽芳) %T Analysis on the capacity degradation mechanism of a series lithium-ion power battery pack based on inconsistency of capacity %0 Journal Article %D 2013 %J Chin. Phys. B %R 10.1088/1674-1056/22/8/088801 %P 88801-088801 %V 22 %N 8 %U {https://cpb.iphy.ac.cn/CN/abstract/article_115198.shtml} %8 2013-06-27 %X The lithium-ion battery has been widely used as an energy source. Charge rate, discharge rate, and operating temperature are very important factors for the capacity degradations of power batteries and battery packs. Firstly, in this paper we make use of an accelerated life test and a statistical analysis method to establish the capacity accelerated degradation model under three constant stress parameters according to the degradation data, which are charge rate, discharge rate, and operating temperature, and then we propose a capacity degradation model according to the current residual capacity of a Li-ion cell under dynamic stress parameters. Secondly, we analyze the charge and discharge process of a series power battery pack and interpret the correlation between the capacity degradations of the battery pack and its charge/discharge rate. According to this cycling condition, we establish a capacity degradation model of a series power battery pack under inconsistent capacity of cells, and analyze the degradation mechanism with capacity variance and operating temperature difference. The comparative analysis of test results shows that the inconsistent operating temperatures of cells in the series power battery pack are the main cause of its degradation; when the difference between inconsistent temperatures is narrowed by 5 ℃, the cycle life can be improved by more than 50%. Therefore, it effectively improves the cycle life of the series battery pack to reasonably assemble the batteries according to their capacities and to narrow the differences in operating temperature among cells.