Please wait a minute...
Chin. Phys. B, 2018, Vol. 27(2): 028104    DOI: 10.1088/1674-1056/27/2/028104
INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY Prev   Next  

Influences of substrate temperature on microstructure and corrosion behavior of APS Ni50Ti25Al25 inter-metallic coating

Sh Khandanjou1, M Ghoranneviss1, Sh Saviz1, M Reza Afshar2
1. Plasma Physics Research Center, Science and Research Branch, Islamic Azad University, Tehran, Iran;
2. Department of Materials Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Abstract  In the present investigation, Ni50Ti25Al25 (at.%) mechanically alloyed powder is deposited on carbon steel substrate. Before the coating process, the substrate is heated to temperature ranging from room temperature to 400℃. The microstructure, porosity, microhardness, adhesion strength, and corrosion behavior of the coating are investigated at different substrate temperatures. Results show that coating porosity is lower on high temperature surface. Microhardness and adhesion strength of the deposition layer on the substrate without preheating have lower values than with preheating. The polarization test result shows that corrosion performance of the coating is dependent on micro cracks and porosities and the increasing of substrate temperature can improve the quality of coating and corrosion performance.
Keywords:  Ni50Ti25Al25 coating      air plasma spray      planetary ball milling      inter-metallic compounds      corrosion resistance  
Received:  25 June 2017      Revised:  23 October 2017      Accepted manuscript online: 
PACS:  81.15.-z (Methods of deposition of films and coatings; film growth and epitaxy)  
  68.55.-a (Thin film structure and morphology)  
  81.70.Bt (Mechanical testing, impact tests, static and dynamic loads)  
  81.65.-b (Surface treatments)  
Corresponding Authors:  Sh Saviz     E-mail:  azarabadegan@gmail.com
About author:  81.15.-z; 68.55.-a; 81.70.Bt; 81.65.-b

Cite this article: 

Sh Khandanjou, M Ghoranneviss, Sh Saviz, M Reza Afshar Influences of substrate temperature on microstructure and corrosion behavior of APS Ni50Ti25Al25 inter-metallic coating 2018 Chin. Phys. B 27 028104

[1] Hsieh S F and Wu S K 1997 J. Mater. Sci. 32 989
[2] Cinca N, Lima C R C and Gulimany J M 2013 J. Mater. Res. Technol. 2 75
[3] Liu K T and Duh J G 2008 Surf. Coating Technol. 202 2737
[4] Zadorozhnyy V, Kaloshkin S, Tcherdyntsev V, Gorshenkov M, Komissarov A and Zadorozhnyy M 2014 J. Alloys Compd. 586 373
[5] Meng L J, Li Y, Zhao X Q, Xu J and Xu H B 2007 Intermetallics 15 814
[6] Yoruk G and Ozdemir O 2012 Intermetallics 25 60
[7] Frommeyer G and Rabibauer R 2008 Mater. Technol. 79 507
[8] Noebe R D, Bowman R R and Nathal M V 1996 Physical Metallurgy and Processing of Intermetallic Compounds 212
[9] Hyjek P, Sulina I and Malczewski P 2015 Metallurgy and Foundary Engineering 41 29
[10] Surbled P, Clerc C, Pioufle B L, Ataka M and Fujita H 2001 Thin Solid Films 401 52
[11] Morgan N B 2004 Mater. Sci. Eng. A 378 16
[12] Lehnert T, Grimmor H, Boni P, Orisberger M H and Gotthardt G 2000 Acta Mater. 48 4065
[13] Javadi M M, Edris H and Salehi M 2011 J. Mater. Sci. Technol. 27 816
[14] Hou G, An Y, Zhao X, Zhao H and Chen J 2016 Tribology International 94 138
[15] Guanhong S, Xiaodong H, Jiuxing J and Tue S 2011 Appl. Surface Sci. 257 7864
[16] Chen T and Wu J 2016 Appl. Sci. 6 70
[17] Sheng L, Zhang W, Gue J, Yang F, Liang Y and Ye H 2010 Intermetallics 18 740
[18] Shi J, Cao Z H, Wei M Z, Pan G J, Xu L J and Meng X K 2015 Mater. Sci. Eng. A 623 104
[19] Lampe T, Eisenberg S and Cabeo E R 2003 Surf. Coatings Technol. 174 1
[20] Sichani H R, Salehi M, Edriss H and Farani M T 2017 Surf. Coatings Technol. 309 959
[21] Tsipas and Alexandra S 2011 J. Eur. Ceram. Soc. 31 2923
[22] Tang D 2015 IOP Conf. Series:Mater. Sci. Eng. A 87 012097
[23] Pershin V, Lufitha M, Chandra S and Mostaghimi J 2003 J. Thermal Spray Technology 12 370
[24] Kumar S, Selvarajan V, Padmanabhan P V A and Sreekumar K P 2008 Mater. Sci. Eng. A 486 287
[25] Karolus M and Panek J 2016 J. Alloys Compd. 658 709
[26] Movahedi B and Jazi H S 2012 Adv. Plasma Spray Applications 189
[27] Wan Y P, Fincke J R, Sampath S, Prased V and Herman H 2002 Int. J. Heat Mass Transfer 45 1007
[28] Ojo O A, Richards N L and Chaturvedi M C 2004 J. Mater. Sci. 39 7401
[29] Guilemany J M, Cinca N, Dosta S and Benedetti A V 2009 Corrosion Science 51 171
[30] Paredes R S C, Amico S C and d'Oliveira A S C M 2006 Surf. Coatings Technol. 200 3049
[1] Effects of WC-Co reinforced Ni-based alloy by laser melting deposition: Wear resistance and corrosion resistance
Zhao-Zhen Huang(黄昭祯), Zhi-Chen Zhang(张志臣), Fan-Liang Tantai(澹台凡亮), Hong-Fang Tian(田洪芳), Zhen-Jie Gu(顾振杰), Tao Xi(郗涛), Zhu Qian(钱铸), and Yan Fang(方艳). Chin. Phys. B, 2021, 30(1): 016802.
[2] Grain boundary restructuring and La/Ce/Y application in Nd-Fe-B magnets
Mi Yan(严密), Jiaying Jin(金佳莹), Tianyu Ma(马天宇). Chin. Phys. B, 2019, 28(7): 077507.
[3] Improvement in coercivity,thermal stability,and corrosion resistance of sintered Nd-Fe-B magnets with Dy80Ga20 intergranular addition
Beibei Zhou(周贝贝), Xiangbin Li(李向斌), Xuejing Cao(曹学静), Gaolin Yan(严高林), Aru Yan(闫阿儒). Chin. Phys. B, 2016, 25(11): 117504.
[4] Surface morphology and electrochemical characterization of electrodeposited Ni–Mo nanocomposites as cathodes for hydrogen evolution
Elhachmi Guettaf Temam, Hachemi Ben Temam, Said Benramache. Chin. Phys. B, 2015, 24(10): 108202.
[5] Preparation of biomedical Ag incorporated hydroxyapatite/titania coatings on Ti6Al4V alloy by plasma electrolytic oxidation
Zhou Lan (周澜), Lü Guo-Hua (吕国华), Mao Fei-Fei (毛菲菲), Yang Si-Ze (杨思泽). Chin. Phys. B, 2014, 23(3): 035205.
[6] Properties of TiN coating on 45# steel for inner surface modification by grid-enhanced plasma source ion implantation method
Zhang Gu-Ling (张谷令), Wang Jiu-Li (王久丽), Liu Yuan-Fu (刘元富), Liu Chi-Zi (刘赤子), Yang Si-Ze (杨思泽). Chin. Phys. B, 2004, 13(8): 1309-1314.
[7] Phase transition and pitting corrosion behaviour for Mo-implanted aluminium
Zhang Tong-He (张通和), Wu Yu-Guang (吴瑜光), Liu Pei-Ying (刘培英), Qian Wei-Dong (钱卫东). Chin. Phys. B, 2002, 11(3): 272-276.
No Suggested Reading articles found!