Please wait a minute...
Chin. Phys. B, 2015, Vol. 24(5): 056601    DOI: 10.1088/1674-1056/24/5/056601
CONDENSED MATTER: STRUCTURAL, MECHANICAL, AND THERMAL PROPERTIES Prev   Next  

An analytical model of thermal mechanical stress induced by through silicon via

Dong Gang (董刚), Shi Tao (石涛), Zhao Ying-Bo (赵颖博), Yang Yin-Tang (杨银堂)
Microelectronics Institute, Xidian University, Xi'an 710071, China
Abstract  We present an accurate through silicon via (TSV) thermal mechanical stress analytical model which is verified by using finite element method (FEM). The results show only a very small error. By using the proposed analytical model, we also study the impacts of the TSV radius size, the thickness, the material of Cu diffusion barrier, and liner on the stress. It is found that the liner can absorb the stress effectively induced by coefficient of thermal expansion mismatch. The stress decreases with the increase of liner thickness. Benzocyclobutene (BCB) as a liner material is better than SiO2. However, the Cu diffusion barrier has little effect on the stress. The stress with a smaller TSV has a smaller value. Based on the analytical model, we explore and validate the linear superposition principle of stress tensors and demonstrate the accuracy of this method against detailed FEM simulations. The analytic solutions of stress of two TSVs and three TSVs have high precision against the finite element result.
Keywords:  through silicon via      finite element method (FEM)      thermal mechanical stress  
Received:  04 September 2014      Revised:  13 January 2015      Accepted manuscript online: 
PACS:  66.30.-h (Diffusion in solids)  
  62.20.-x (Mechanical properties of solids)  
  72.15.-v (Electronic conduction in metals and alloys)  
  84.30.-r (Electronic circuits)  
Fund: Project supported by the National Natural Science Foundation of China (Grant No. 61334003) and the Kunshan Innovation Institute of Xidian University.
Corresponding Authors:  Dong Gang     E-mail:  gdong@mail.xidian.edu.cn
About author:  66.30.-h; 62.20.-x; 72.15.-v; 84.30.-r

Cite this article: 

Dong Gang (董刚), Shi Tao (石涛), Zhao Ying-Bo (赵颖博), Yang Yin-Tang (杨银堂) An analytical model of thermal mechanical stress induced by through silicon via 2015 Chin. Phys. B 24 056601

[1] Hsu M K, Balabanov V and Chang Y W 2013 IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst. 32 497
[2] Sai M P D, Shang Y H, Tan C S and Lim S K 2013 IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst. 32 1734
[3] Qian L B, Zhu Z M, Xia Y S, Ding R X and Yang Y T 2014 Chin. Phys. B 23 038402
[4] Wu X X, Zhao W, Nakamoto M, Nimmagadda C, Lisk D, Gu S, Radojcic R, Nowak M and Xie Y 2012 IEEE Trans. Very Large Scale Integr. Syst. 20 186
[5] Selvanayagam C S, Lau J H, Zhang X, Seah S K, Vaidyanathan K and Chai T C 2009 IEEE Trans. Adv. Packag. 32 720
[6] Ranganathan N, Prasad K, Balasubramanian N and Pey K L 2008 J. Micromech. Microeng. 18 115028
[7] Ryu S K, Lu K H, Jiang T, Im J H, Huang R and Ho P S 2012 IEEE Trans. Device Mater. Reliab. 12 255
[8] Lu K H, Zhang X, Ryu S K, Im J, Huang R and Ho P S 2009 IEEE Electronic Components and Technology Conference, May 26-29, San Diego, USA, pp. 630-634
[9] Lee Y J and Lim S K 2011 IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst. 30 1635
[10] Backes B, McDonough C, Smith L, Wang W and Geer R E 2012 J. Electron. Test: Theory Appl. 28 53
[11] Jung M, Mitra J, Pan D Z and Lim S K 2012 IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst. 31 1194
[12] Ko S C, Min B G, Park Y R, Kim J J, Sung H K, Mun J K and Nam E S 2013 J. Micromech. Microeng. 23 035011
[13] Weerasekera R, Li H Y, Yi L W, Sanming H, Shi J, Minkyu J and Teo K H 2013 IEEE Electron Device Lett. 34 18
[14] Chan Y S, Li H Y and Zhang X 2013 IEEE Trans. Compon. Packag. Manufact. Tech. 3 633
[15] Qian L B, Zhu Z M and Yang Y T 2012 Acta Phys. Sin. 61 068001 (in Chinese)
[16] Jung M, Mitra J, Pan D Z and Lim S K 2011 IEEE Design Automation Conference, June 5-9, New York, USA, pp. 188-193
[17] Udupa A, Subbarayan G and Koh C K 2012 Microelectron. Reliab. 53 63
[18] Lee H M, Liu E X, Samudra G S and Li E P 2012 IEEE Electrical Design of Advanced Packaging and Systems Symposium, December 9-11, Taipei, China, pp. 189-192
[19] Zou Q, Zhang T, Kursun E and Xie Y 2013 DATE Conference and Exhibition, March 18-22, Grenoble, France, pp. 1255-1258
[20] Kinoshita T, Kawakami T, Hori T, Matsumoto K, Kohara S, Orii Y, Yamada F and Kada M 2012 J. Electron. Packag. 134 020903
[21] Wu J H and Alamo J A 2010 IEEE Trans. Electron Devices 57 1261
[22] Wang F, Zhu Z, Yang Y, Liu X and Ding R 2013 IEICE Electron. Express 10 20130666
[23] Pan D Z 2013 IEEE Design Automation Conference, May 29-June 7, Austin, USA, pp. 1-8
[1] Plasmonic characteristics of suspended graphene-coated wedge porous silicon nanowires with Ag partition
Xu Wang(王旭), Jue Wang(王珏), Tao Ma(马涛), Heng Liu(刘恒), and Fang Wang(王芳). Chin. Phys. B, 2021, 30(1): 014207.
[2] Stress and strain analysis of Si-based Ⅲ-V template fabricated by ion-slicing
Shuyan Zhao(赵舒燕), Yuxin Song(宋禹忻), Hao Liang(梁好), Tingting Jin(金婷婷), Jiajie Lin(林家杰), Li Yue(岳丽), Tiangui You(游天桂), Chang Wang(王长), Xin Ou(欧欣), Shumin Wang(王庶民). Chin. Phys. B, 2020, 29(7): 077303.
[3] Optical modulation of repaired damage site on fused silica produced by CO2 laser rapid ablation mitigation
Chao Tan(谭超), Lin-Jie Zhao(赵林杰), Ming-Jun Chen(陈明君), Jian Cheng(程健), Zhao-Yang Yin(尹朝阳), Qi Liu(刘启), Hao Yang(杨浩), Wei Liao(廖威). Chin. Phys. B, 2020, 29(5): 054209.
[4] Reduction of signal reflection along through silicon via channel in high-speed three-dimensional integration circuit
Liu Xiao-Xian (刘晓贤), Zhu Zhang-Ming (朱樟明), Yang Yin-Tang (杨银堂), Wang Feng-Juan (王凤娟), Ding Rui-Xue (丁瑞雪). Chin. Phys. B, 2014, 23(3): 038401.
[5] Suppressing the mechanical quadrature error of a quartz double-H gyroscope through laser trimming
Zhao Ke (赵克), Feng Li-Hui (冯立辉), Wang Qian-Qian (王茜蒨), Liu Ming-Zhi (刘明智), Wang Ben-Guo (王本国), Cui Fang (崔芳), Sun Yu-Nan (孙雨南). Chin. Phys. B, 2013, 22(11): 117901.
No Suggested Reading articles found!