Please wait a minute...
Chin. Phys. B, 2014, Vol. 23(4): 048102    DOI: 10.1088/1674-1056/23/4/048102
INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY Prev   Next  

Influences of nitrogen flow rate on the structures and properties of Ti and N co-doped diamond-like carbon films deposited by arc ion plating

Zhang Lin (张林)a b, Ma Guo-Jia (马国佳)b, Lin Guo-Qiang (林国强)a, Ma He (马贺)b, Han Ke-Chang (韩克昌)a
a Key Laboratory for Material Modification by Laser, Ion and Electron Beams, Dalian University of Technology, Dalian 116024, China;
b Science and Technology on Power Beam Processes Laboratory, Beijing Aeronautical ManufacturingTechnology Research Institute, Beijing 100024, China
Abstract  In this paper, Ti-C-N nanocomposite films are deposited under different nitrogen flow rates by pulsed bias arc ion plating using Ti and graphite targets in the Ar/N2 mixture gas. The surface morphologies, compositions, microstructures, and mechanical properties of the Ti-C-N films are investigated systematically by field emission scanning electron microscopy (FE-SEM), x-ray photoelectron spectroscopy (XPS), grazing incident x-ray diffraction (GIXRD), Raman spectra, and nano-indentation. The results show that the nanocrystalline Ti(C,N) phase precipitates in the film from GIXRD and XPS analysis, and Raman spectra prove the presence of diamond-like carbon, indicating the formation of nanocomposite film with microstructures comprising nanocrystalline Ti(C,N) phase embedded into a diamond-like matrix. The nitrogen flow rate has a significant effect on the composition, structure, and properties of the film. The nano-hardness and elastic modulus first increase and then decrease as nitrogen flow rate increases, reaching a maximum of 34.3 GPa and 383.2 GPa, at a nitrogen flow rate of 90 sccm, respectively.
Keywords:  arc ion plating      Ti-C-N film      nitrogen flow rate      microstructure  
Received:  26 July 2013      Revised:  22 September 2013      Accepted manuscript online: 
PACS:  81.15.Jj (Ion and electron beam-assisted deposition; ion plating)  
  68.55.-a (Thin film structure and morphology)  
  68.60.Bs (Mechanical and acoustical properties)  
  61.05.cj (X-ray absorption spectroscopy: EXAFS, NEXAFS, XANES, etc.)  
Fund: Project supported by the National Natural Science Foundation of China (Grant No. 51271047).
Corresponding Authors:  Zhang Lin     E-mail:  linzh1817@gmail.com
About author:  81.15.Jj; 68.55.-a; 68.60.Bs; 61.05.cj

Cite this article: 

Zhang Lin (张林), Ma Guo-Jia (马国佳), Lin Guo-Qiang (林国强), Ma He (马贺), Han Ke-Chang (韩克昌) Influences of nitrogen flow rate on the structures and properties of Ti and N co-doped diamond-like carbon films deposited by arc ion plating 2014 Chin. Phys. B 23 048102

[1] Zhang G, Li B, Jiang B, Yan F and Chen D 2009 Appl. Surf. Sci. 255 8788
[2] Shafiq M, Hassan M, Shahzad K, Qayyum A, Ahmad S, Rawat R S and Zakaullah M 2010 Chin. Phys. B 19 012801
[3] Cheng Y and Zheng Y F 2007 Surf. Coat. Technol. 201 4909
[4] Lu Y H, Wang J P and Shen Y G 2009 Appl. Surf. Sci. 255 7858
[5] Tsotsos C, Baker M A, Polychronopoulou K, Gibson P N, Giannakopoulos K, Polycarpou A A, Böbel K and Rebholz C 2010 Thin Solid Films 519 24
[6] Martínez-Martínez D, López-Cartes C, Justo A, Fernández A and Sáchez-López J C 2009 Solid State Sci. 11 660
[7] Barshilia H C, Prakash M S, Sridhara Rao D V and Rajam K S 2005 Surf. Coat. Technol. 195 147
[8] Lu Y H and Shen Y G 2007 Appl. Phys. Lett. 90 221913
[9] Chen R, Tu J P, Liu D G, Mai Y J and Gu C D 2011 Surf. Coat. Technol. 205 5228
[10] Lin G Q, Zhao Y H, Guo H M, Wang D Z, Dong C, Huang R F and Wen L S 2004 J. Vac. Sci. Technol. A 22 1218
[11] Zhang M, Lin G Q, Dong C and Wen L S 2007 Acta Phys. Sin. 56 7300 (in Chinese)
[12] Stüber M, Leiste H, Ulrich S, Holleck H and Schild D 2002 Surf. Coat. Technol. 150 218
[13] Zhou F, Adachi K and Kato K 2006 Thin Solid Films 514 231
[14] Guemmaz M, Moraitis G, Mosser A, Khan M A and Parlebas J C 1997 J. Phys.: Condes. Matter 9 8453
[15] Johansson L I, Johansson H I P and Håkansson K L 1993 Phys. Rev. B 48 14520
[16] Wang Q, Zhou F, Zhou Z, Yang Y, Yan C, Wang C, Zhang W J, Li L K Y, Bello I and Lee S T 2012 Surf. Coat. Technol. 206 3777
[17] Levi G, Kaplan W D and Bamberger M 1998 Mater. Lett. 35 344
[18] Robertson J 2002 Mater. Sci. Eng. R 37 129
[19] Chu P K and Li L 2006 Mater. Chem. Phys. 96 253
[20] Zhang S, Zeng X T, Xie H and Hing P 2000 Surf. Coat. Technol. 123 256
[21] Vepřek S and Reiprich S 1995 Thin Solid Films 268 64
[22] Li H K, Lin G Q and Dong C 2010 Acta Phys. Sin. 59 4296 (in Chinese)
[1] Effect of thickness of antimony selenide film on its photoelectric properties and microstructure
Xin-Li Liu(刘欣丽), Yue-Fei Weng(翁月飞), Ning Mao(毛宁), Pei-Qing Zhang(张培晴), Chang-Gui Lin(林常规), Xiang Shen(沈祥), Shi-Xun Dai(戴世勋), and Bao-An Song(宋宝安). Chin. Phys. B, 2023, 32(2): 027802.
[2] Surface structure modification of ReSe2 nanosheets via carbon ion irradiation
Mei Qiao(乔梅), Tie-Jun Wang(王铁军), Yong Liu(刘泳), Tao Liu(刘涛), Shan Liu(刘珊), and Shi-Cai Xu(许士才). Chin. Phys. B, 2023, 32(2): 026101.
[3] Optical and electrical properties of BaSnO3 and In2O3 mixed transparent conductive films deposited by filtered cathodic vacuum arc technique at room temperature
Jian-Ke Yao(姚建可) and Wen-Sen Zhong(钟文森). Chin. Phys. B, 2023, 32(1): 018101.
[4] Microstructure and hardening effect of pure tungsten and ZrO2 strengthened tungsten under carbon ion irradiation at 700℃
Chun-Yang Luo(罗春阳), Bo Cui(崔博), Liu-Jie Xu(徐流杰), Le Zong(宗乐), Chuan Xu(徐川), En-Gang Fu(付恩刚), Xiao-Song Zhou(周晓松), Xing-Gui Long(龙兴贵), Shu-Ming Peng(彭述明), Shi-Zhong Wei(魏世忠), and Hua-Hai Shen(申华海). Chin. Phys. B, 2022, 31(9): 096102.
[5] Two-dimensional Sb cluster superlattice on Si substrate fabricated by a two-step method
Runxiao Zhang(张润潇), Zi Liu(刘姿), Xin Hu(胡昕), Kun Xie(谢鹍), Xinyue Li(李新月), Yumin Xia(夏玉敏), and Shengyong Qin(秦胜勇). Chin. Phys. B, 2022, 31(8): 086801.
[6] Surface chemical disorder and lattice strain of GaN implanted by 3-MeV Fe10+ ions
Jun-Yuan Yang(杨浚源), Zong-Kai Feng(冯棕楷), Ling Jiang(蒋领), Jie Song(宋杰), Xiao-Xun He(何晓珣), Li-Ming Chen(陈黎明), Qing Liao(廖庆), Jiao Wang(王姣), and Bing-Sheng Li(李炳生). Chin. Phys. B, 2022, 31(4): 046103.
[7] Thermoelectric enhancement in triple-doped strontium titanate with multi-scale microstructure
Zheng Cao(曹正), Qing-Qiao Fu(傅晴俏), Hui Gu(顾辉), Zhen Tian(田震), Xinba Yaer(新巴雅尔), Juan-Juan Xing(邢娟娟), Lei Miao(苗蕾), Xiao-Huan Wang(王晓欢), Hui-Min Liu(刘慧敏), and Jun Wang(王俊). Chin. Phys. B, 2021, 30(9): 097204.
[8] Microstructure and magnetocaloric properties in melt-spun and high-pressure hydrogenated La0.5Pr0.5Fe11.4Si1.6 ribbons
Qian Liu(刘倩), Min Tong(佟敏), Xin-Guo Zhao(赵新国), Nai-Kun Sun(孙乃坤), Xiao-Fei Xiao(肖小飞), Jie Guo(郭杰), Wei Liu(刘伟), and Zhi-Dong Zhang(张志东). Chin. Phys. B, 2021, 30(8): 087502.
[9] Formation of nano-twinned 3C-SiC grains in Fe-implanted 6H-SiC after 1500-℃ annealing
Zheng Han(韩铮), Xu Wang(王旭), Jiao Wang(王娇), Qing Liao(廖庆), and Bingsheng Li(李炳生). Chin. Phys. B, 2021, 30(8): 086107.
[10] Effect of the potential function and strain rate on mechanical behavior of the single crystal Ni-based alloys: A molecular dynamics study
Qian Yin(尹倩), Ye-Da Lian(连业达), Rong-Hai Wu(巫荣海), Li-Qiang Gao(高利强), Shu-Qun Chen(陈树群), and Zhi-Xun Wen(温志勋). Chin. Phys. B, 2021, 30(8): 080204.
[11] Effects of post-sinter annealing on microstructure and magnetic properties of Nd-Fe-B sintered magnets with Nd-Ga intergranular addition
Jin-Hao Zhu(朱金豪), Lei Jin(金磊), Zhe-Huan Jin(金哲欢), Guang-Fei Ding(丁广飞), Bo Zheng(郑波), Shuai Guo(郭帅), Ren-Jie Chen(陈仁杰), and A-Ru Yan(闫阿儒). Chin. Phys. B, 2021, 30(6): 067503.
[12] Effect of helium concentration on irradiation damage of Fe-ion irradiated SIMP steel at 300 ℃ and 450 ℃
Zhen Yang(杨振), Junyuan Yang(杨浚源), Qing Liao(廖庆), Shuai Xu(徐帅), and Bingsheng Li(李炳生). Chin. Phys. B, 2021, 30(5): 056107.
[13] Leakage of an eagle flight feather and its influence on the aerodynamics
Di Tang (唐迪), Dawei Liu(刘大伟), Yin Yang(杨茵), Yang Li(李阳), Xipeng Huang(黄喜鹏), and Kai Liu(刘凯). Chin. Phys. B, 2021, 30(3): 034701.
[14] Fractal microstructure of Ag film via plasma discharge as SERS substrates
Xue-Fen Kan(阚雪芬), Cheng Yin(殷澄), Zhuang-Qi Cao(曹庄琪), Wei Su(苏巍), Ming-Lei Shan(单鸣雷), and Xian-Ping Wang(王贤平). Chin. Phys. B, 2021, 30(12): 125201.
[15] Accurate prediction method for the microstructure of amorphous alloys without non-metallic elements
Wei Zhao(赵伟), Jia-Lin Cheng(成家林), Gong Li(李工), and Xin Wang(王辛). Chin. Phys. B, 2021, 30(11): 116103.
No Suggested Reading articles found!