Please wait a minute...
Chin. Phys. B, 2008, Vol. 17(7): 2610-2620    DOI: 10.1088/1674-1056/17/7/044
CONDENSED MATTER: STRUCTURAL, MECHANICAL, AND THERMAL PROPERTIES Prev   Next  

Exact analytic solutions for an elliptic hole with asymmetric collinear cracks in a one-dimensional hexagonal quasi-crystal

Guo Jun-Hong(郭俊宏) and Liu Guan-Ting(刘官厅)
College of Mathematics Science, Inner Mongolia Normal University, Huhhot 010022, China
Abstract  Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric collinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors (SIFs) for mode III problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.
Keywords:  one-dimensional hexagonal quasi-crystals      elliptic hole with asymmetric collinear cracks      stress intensity factor      complex variable function method  
Received:  26 November 2007      Revised:  09 January 2008      Accepted manuscript online: 
PACS:  61.44.Br (Quasicrystals)  
  46.50.+a (Fracture mechanics, fatigue and cracks)  
  62.20.M- (Structural failure of materials)  
  63.20.-e (Phonons in crystal lattices)  
Fund: Project supported by the National Natural Science Foundation of China (Grant No 10761005) and the Inner Mongolia Natural Science Foundation of China (Grant No 200607010104).

Cite this article: 

Guo Jun-Hong(郭俊宏) and Liu Guan-Ting(刘官厅) Exact analytic solutions for an elliptic hole with asymmetric collinear cracks in a one-dimensional hexagonal quasi-crystal 2008 Chin. Phys. B 17 2610

[1] Analysis of composite material interface crack face contact and friction effects using a new node-pairs contact algorithm
Zhong Zhi-Peng (钟志鹏), He Yu-Bo (何郁波), Wan Shui (万水). Chin. Phys. B, 2014, 23(6): 064601.
[2] Icosahedral quasicrystals solids with an elliptic hole under uniform heat flow
Li Lian-He (李联和), Liu Guan-Ting (刘官厅). Chin. Phys. B, 2014, 23(5): 056101.
[3] Anti-plane problem analysis for icosahedral quasicrystals under shear loadings
Li Wu (李梧), Chai Yu-Zhen (柴玉珍). Chin. Phys. B, 2014, 23(11): 116201.
[4] A Dugdale–Barenblatt model for a strip with a semi-infinite crack embedded in decagonal quasicrystals
Li Wu (李梧), Xie Ling-Yun (解凌云). Chin. Phys. B, 2013, 22(3): 036201.
[5] A scaled boundary node method applied to two-dimensional crack problems
Chen Shen-Shen (陈莘莘), Li Qing-Hua (李庆华), Liu Ying-Hua (刘应华 ). Chin. Phys. B, 2012, 21(11): 110207.
[6] Analytic solutions to a finite width strip with a single edge crack of two-dimensional quasicrystals
Li Wu(李梧) . Chin. Phys. B, 2011, 20(11): 116201.
[7] On the interaction between dislocations and cracks in one-dimensional hexagonal quasi-crystals
Liu Guan-Ting (刘官厅), Guo Rui-Ping (郭瑞平), Fan Tian-You (范天佑). Chin. Phys. B, 2003, 12(10): 1149-1155.
No Suggested Reading articles found!