Please wait a minute...
Chinese Physics, 2004, Vol. 13(8): 1320-1325    DOI: 10.1088/1009-1963/13/8/024
CONDENSED MATTER: STRUCTURAL, MECHANICAL, AND THERMAL PROPERTIES Prev   Next  

Adhesion elastic contact and hysteresis effect

Wei Zheng (魏征), Zhao Ya-Pu (赵亚溥)
State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China
Abstract  In this paper, we study the relationship between the pull-off force and the transition parameter (or Tabor number) as well as the variation of the pull-off radius with the transition parameter in the adhesion elastic contact. Hysteresis models are presented to describe the contact radius as a function of external loads in loading and unloading processes. Among these models, we verified the hysteresis model from Johnson-Kendall-Roberts theory, based on which the calculated results are in good agreement with experimental ones.
Keywords:  adhesion hysteresis      contact models      pull-off radius      energy dissipation ratio  
Received:  27 November 2003      Revised:  05 April 2004      Accepted manuscript online: 
PACS:  46.55.+d (Tribology and mechanical contacts)  
  46.25.Cc (Theoretical studies)  
Fund: Project supported by the Funds for Outstanding Young Researchers from the National Natural Science Foundation of China (Grant No 10225209), the Key Project from the Chinese Academy of Sciences (Grant No KJCX2-SW-L2) and the State Key Development Programme

Cite this article: 

Wei Zheng (魏征), Zhao Ya-Pu (赵亚溥) Adhesion elastic contact and hysteresis effect 2004 Chinese Physics 13 1320

[1] Adhesive contact: from atomistic model to continuum model
Fan Kang-Qi(樊康旗),Jia Jian-Yuan(贾建援), Zhu Ying-Min(朱应敏), and Zhang Xiu-Yan(张秀艳) . Chin. Phys. B, 2011, 20(4): 043401.
No Suggested Reading articles found!