Please wait a minute...
Chinese Physics, 2007, Vol. 16(1): 266-271    DOI: 10.1088/1009-1963/16/1/045
CROSS DISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY Prev   Next  

Edge method for measuring source spot-size and its principle

Shi Jiang-Jun(施将君), Liu Jun(刘军), Liu Jin(刘进), and Li Bi-Yong(李必勇)
Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China
Abstract  The edge method is used to measure the source spot-size. In this paper, the measuring principle and applying range are discussed. It is shown that the method can directly be used to measure the spot-size of either light source, or low-energy x-ray source, or x-ray source with an energy higher than 250 keV.
Keywords:  edge method      edge spread function (ESF)      linear spread function (LSF)      full width at half maximum (FWHM)  
Received:  16 February 2006      Revised:  15 August 2006      Accepted manuscript online: 
PACS:  41.50.+h (X-ray beams and x-ray optics)  
  07.85.Fv (X- and γ-ray sources, mirrors, gratings, and detectors)  
  42.72.-g (Optical sources and standards)  
Fund: Project supported by the foundation of China Academy of Engineering Physics (Grant No 025300).

Cite this article: 

Shi Jiang-Jun(施将君), Liu Jun(刘军), Liu Jin(刘进), and Li Bi-Yong(李必勇) Edge method for measuring source spot-size and its principle 2007 Chinese Physics 16 266

[1] Calculation of the infrared frequency and the damping constant (full width at half maximum) for metal organic frameworks
M Kurt, H Yurtseven, A Kurt, S Aksoy. Chin. Phys. B, 2019, 28(6): 066401.
No Suggested Reading articles found!