中国物理B ›› 2017, Vol. 26 ›› Issue (5): 58402-058402.doi: 10.1088/1674-1056/26/5/058402

• RAPID COMMUNICATION • 上一篇    下一篇

High quality factor superconducting coplanar waveguide fabricated with TiN

Qiang Liu(刘强), Guang-Ming Xue(薛光明), Xin-Sheng Tan(谭新生), Hai-Feng Yu(于海峰), Yang Yu(于扬)   

  1. 1 National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093, China;
    2 Key Laboratory of Quantum Information, University of Science and Technology of China, Hefei 230026, China;
    3 Synergetic Innovation Center of Quantum Information & Quantum Physics, University of Science and Technology of China, Hefei 230026, China
  • 收稿日期:2017-02-16 出版日期:2017-05-05 发布日期:2017-05-05
  • 通讯作者: Hai-Feng Yu, Yang Yu E-mail:hfyu@nju.edu.cn;yuyang@nju.edu.cn
  • 基金资助:

    Project supported by the the NKRDP of China (Grant No. 2016YFA0301802) and the National Natural Science Foundation of China (Grant Nos. 91321310, 11274156, 11504165, 11474152, and 61521001).

High quality factor superconducting coplanar waveguide fabricated with TiN

Qiang Liu(刘强)1, Guang-Ming Xue(薛光明)2, Xin-Sheng Tan(谭新生)1, Hai-Feng Yu(于海峰)1,3, Yang Yu(于扬)1,3   

  1. 1 National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093, China;
    2 Key Laboratory of Quantum Information, University of Science and Technology of China, Hefei 230026, China;
    3 Synergetic Innovation Center of Quantum Information & Quantum Physics, University of Science and Technology of China, Hefei 230026, China
  • Received:2017-02-16 Online:2017-05-05 Published:2017-05-05
  • Contact: Hai-Feng Yu, Yang Yu E-mail:hfyu@nju.edu.cn;yuyang@nju.edu.cn
  • Supported by:

    Project supported by the the NKRDP of China (Grant No. 2016YFA0301802) and the National Natural Science Foundation of China (Grant Nos. 91321310, 11274156, 11504165, 11474152, and 61521001).

摘要:

We fabricated TiN coplanar waveguides using standard lithography techniques followed by ICP etch. In order to achieve high quality factor, we investigated the film growth by choosing different deposition conditions for various substrates. Quality factors of waveguide resonators were measured at 20 mK in both high and low microwave power limits. An inner quality factor of several million was achieved at high power limit for a predominantly (200)-oriented TiN film which was grown on HF cleaned silicon wafer. A quality factor of larger than one million was achieved at high power limit for TiN film grown on sapphire.

关键词: TiN film, superconducting coplanar waveguide, quality factor

Abstract:

We fabricated TiN coplanar waveguides using standard lithography techniques followed by ICP etch. In order to achieve high quality factor, we investigated the film growth by choosing different deposition conditions for various substrates. Quality factors of waveguide resonators were measured at 20 mK in both high and low microwave power limits. An inner quality factor of several million was achieved at high power limit for a predominantly (200)-oriented TiN film which was grown on HF cleaned silicon wafer. A quality factor of larger than one million was achieved at high power limit for TiN film grown on sapphire.

Key words: TiN film, superconducting coplanar waveguide, quality factor

中图分类号:  (Waveguides, transmission lines, striplines)

  • 84.40.Az
85.25.Am (Superconducting device characterization, design, and modeling)